Questions tagged [juju]
Juju is a Charmed Operator Framework, composed of a Charmed Operator Lifecycle Manager and the Charmed Operator SDK.
362
questions with no upvoted or accepted answers
1
vote
0
answers
148
views
Openstack services gets in hook-failed issues when deployed using JUJU
I deployed Openstack successfully using Juju Charm over MaaS servers. Openstack is up and running but after sometime some of the Units lands up into error/blocked state(i.e charm hook issues regarding ...
1
vote
1
answer
59
views
Openstack autopilot-Firewall pending create
We have installed open stack autopilot and in dashboard created firewall and the status showing pending create.how i can delete the same and how to find the neutron database in which LXD its installed ...
1
vote
1
answer
650
views
whats wrong with juju!
I have been working on Juju for very long and haven't touch the config file or set any permissions on the file. I don't know why Juju is doing mad here. First it doesn't show the last charms and its ...
1
vote
0
answers
105
views
juju (canonical-kubernetes bundle) Master support HA?
I am trying to use juju (canonical-kubernetes bundle) to setup kubernetes. It works well with simple master.
Is there steps to make the master HA? I just change the unit# in the bundle and re-deploy ...
1
vote
0
answers
688
views
How to add custom power type to MAAS 2.1.x to use PC power control using raspberry pi
I have built raspberry pi with Piface to control my physical pcs, I have server with Ubuntu 16.04 and installed MAAS 2.1.5 on it.
There was old post, how to build pc power control using ubuntu 14.x ...
1
vote
0
answers
215
views
"sudo conjure-up --bootstrap-to juju" command is not working
This is my first time, i am trying to install openstack on ubuntu, using vms. I have a private network for PXE boot only managed by maas vm and have other vms as nodes. One vm which i want to setup ...
1
vote
0
answers
74
views
Juju GUI and Landscape GUI not accessible from different subnet
We have deployed auto pilot on Ubuntu 16.0.4 LTS with Juju and MAAS. I am unable to access Juju GUI from a different subnet. It is accessible on the same subnet. The Architecture for environment is ...
1
vote
1
answer
123
views
Conjure-Up Landscape failure
I am current following this guide to test out Ubuntu's Autopilot setup.
The section of deploying Landscape is not working on my end, and am wondering if anyone can provide assistance.
I have a ...
1
vote
0
answers
241
views
JuJu 2.1.2, Some subordinate charms do not deploy after relation is built
I found out some subordinate charms like ceilometer-agent and neutron-openvswitch are not working. The juju deploy ceilometer-agent and juju add-relation ceilometer-agent ceilometer are all return ...
1
vote
1
answer
2k
views
Apache2 not starting on Ubuntu Server 17.04
Not able to restart apache2.
checking sudo netstat -tulpn | grep :80 got this result:
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1627/nginx: master
tcp6 ...
1
vote
0
answers
1k
views
Openstack Deployment on MAAS2.0
This is my first go at containers, so please bear with me. I tried to deploy openstack using MAAS2.0.
I setup the required machines ( 4 nodes + Juju Controller) and I followed the instructions on ...
1
vote
0
answers
41
views
How to add my existing LXD containers from differnt host to OpenStack?
I'm looking for creating a Private cloud(OpenStack) using 5 i5 pc's running windows with Ubuntu 16.04 in Oracle VM. I have setup 10 LXD containers in each of them, now I need to add all of containers ...
1
vote
1
answer
256
views
how to configure repository for juju?
I'm a juju newbie.
As known, the juju charm store is the official and default repository for juju deploy. It seems that "cs" denotes the charm store, while "local" denotes the local repository (...
1
vote
1
answer
261
views
Ubuntu OpenStack Autopilot Install Failing
I am following the steps outlined on the Get OpenStack Autopilot page. I've already deployed MAAS 1.9 on Ubuntu 14.04LTS and have 5 nodes in the Ready state in MAAS. However, when I run openstack-...
1
vote
0
answers
49
views
Where can I find a blog-style case study of juju workflow
So I've skimmed all the introductory juju docs and I still don't really understand what exactly juju is. I'm aware that this is a very vague complaint but I don't yet have a clear enough picture of ...
1
vote
0
answers
986
views
DNS Confusion: curl and wget got through but host and dig do not
For every Linux machine running I have used on my corporate intranet, I am able to use the corporate DNS and corporate proxy without any trouble for most high-level functions such as wget, curl, using ...
1
vote
0
answers
23
views
autopilot installation error
I am trying the autopilot install using instructions from
https://www.ubuntu.com/download/cloud
Autopilot consistently fails at point where the status display says registering against landscape
The ...
1
vote
0
answers
1k
views
openstack trusty:liberty deployment fails due to no relations and insufficient peer units
I'm currently trying to deploy an Openstack trusty-liberty cloud with juju (1.25.6-0ubuntu1.14.04.1) in a KVM virtualized MAAS environment. To do so, I downloaded the openstack-base bundle from here: ...
1
vote
2
answers
87
views
MAAS for old hardware and Ubuntu for video production
I'm an enthusiast newbie that runs a small (new born) video production company on the 3rth world... We have a mixed old hardware environment (about 6 machines from Intel P4 to core 2 duo).
I want to ...
1
vote
1
answer
103
views
Openstack with autopilot, some networking clear up
I have some questions about Openstack. I am planning on using Ubuntu and landscape (with autopilot too).
1.) First I installed MAAS and added the nodes to it. Now when issuing the command “sudo ...
1
vote
0
answers
235
views
Juju bootstrap to openstack failing with 404 message
I'm trying to get juju-core to bootstrap to my OpenStack cloud. I pulled the environment file from Openstack but when I try the boot strap I see a "404" error returned from Openstack. It appears ...
1
vote
0
answers
161
views
Openstack Single Installer Fails - keystone: hook failed: "config-changed"
Tried steps given here on Ubuntu14.04 LTS. I'm Hitting keystone: hook failed: "config-changed" error. I could see same problem reported #961, and the suggested solution
is to try from ppa:cloud-...
1
vote
0
answers
90
views
Autopilot vSphere node creation problem
I followed this guide to try Autopilot on vSphere environment.
I ran autopilot-config and everything seems work fine, but no nodes (instead of 3) are displayed inside the MAAS page.
In the maas.log ...
1
vote
0
answers
29
views
About Ubuntu Cloud servers requirement?
I'm researching about Ubuntu Cloud. Could you please let me ask something? Thanks in advance :)
Why Ubuntu says that Cloud requires 5 servers, but Juju just requires 4 servers?
For Ubuntu Cloud, if ...
1
vote
1
answer
714
views
How to add ssh key info @ Juju Charm for AWS
I am provision vms at AWS using Juju Charm. How can I add my AWS ssh key to Juju so I can access to vms which I provision for MySQL, HAproxy and others. thanks.
Update...
I am provisioning vms at ...
1
vote
1
answer
61
views
Is it possible to set ELB using juju charms?
I get several charms using jujucharms official website. but when i try to access juju deploy aws-ec2-elb error occurred. So is it possible to set elb using juju-core command line ?
1
vote
0
answers
111
views
Error running $ juju quickstart
Error running $ juju quickstart. I doubt there is some problem with maas installation but can't find any.
juju quickstart v2.2.4
ssh-agent has been started.
To interact with Juju or ...
1
vote
1
answer
421
views
Installing openstack with Juju and MAAS
I'm currently trying to deploy an Openstack cluster using Juju and MAAS on Ubuntu 14.04.
I have 6 servers, one allocated as my MAAS server and the rest are enlisted and commissioned by the MAAS ...
1
vote
0
answers
156
views
MAAS/Autopilot install enable console
In Autopilot install of Openstack I see that I don't have console enabled. Googled it and only found below as a solution. Thing is I don't have nova-cloud-controller installed at all using autopilot.
...
1
vote
0
answers
132
views
Force JUJU to not remove Machine after removing all charms
Why juju remove machine after removing all charms?
How can I force juju to not remove machine when I remove all charms from that machine?
1
vote
0
answers
67
views
Deploying node in maas error
I deploy the node after they are commissioned, it is failed. The screen prints out a lot of messages, repeatedly says
cannot create symlink to/usr/share/ca-certifcates/mozilla/...
1
vote
0
answers
110
views
Is the default hypervisor is LXC and how do I change it to KVM?
Is the default hypervisor is LXC, when i install my openstack with juju (sudo openstack-install)?
How to change it to KVM? Except the array of EMC, how to use the third array through cinder?
Or ...
1
vote
0
answers
64
views
juju-gui Access through local network not private network
How can I provide access to juju-gui through public local network not private MAAS network?
1
vote
0
answers
300
views
Juju bootstrap wrong Maas API
Ubuntu 16.04
Maas 2.0.0 (beta3+bzr4941)
Juju 2.0beta7
While attempting to bootstrap to an arbitrary MaaS node, Juju tries to access Maas api version 1.0 which does not exist.
2016-05-30 19:16:49 ...
1
vote
0
answers
124
views
openstack autopilot deployed new machine with juju not showing in horizon dashboard
I added new machine in MAAS and deployed it in juju by using the following command:
mrau1@mrau1$ juju ssh landscape-server/0 sudo 'JUJU_HOME=/var/lib/landscape/juju-homes/`sudo ls -rt /var/lib/...
1
vote
0
answers
90
views
MAAS: new host's IP changes after commissioning, but config files keep original IP
So, I've got a region controller, and two cluster controllers. (All separate machines.) Cluster #1 -- the local cluster, on a 172.23.x.0/23 subnet -- works great. The remote cluster, on 10.2.0.x/16,...
1
vote
0
answers
109
views
Openstack installer Autopilot failing at juju bootstrap
I have a MAAS node already deployed using juju bootstrap --upgrade tools option and when I run sudo openstack-install and select option Autopilot. It appears it is timing out for entropy.ubuntu.com. ...
1
vote
0
answers
131
views
Getting segfault when installing Landscape Dedicated Server
I am trying to set up Landscape on a DigitalOcean VPS (14.04) and at the very end of the install I get a segfault. I'm new to landscape so I might struggle. What am I doing wrong?
Here's the code ...
1
vote
3
answers
2k
views
Deploy MAAS, Juju, Openstack
I have look in to dozens on online document but none give me the exact steps and recommendation for deploying MAAS, Juju and OpenStack on Ubuntu.
There's plenty of documentation available but none ...
1
vote
0
answers
38
views
Setting up JuJu Local instance on UbuntuVM with Joomla, can't connect?
I setup a Ubuntu vm 14.04 in hyper-v, included a virtual switch, opened up port 80 on the router for that specific address, and I still cannot connect to the joomla charm. I can ping the vm just fine ...
1
vote
0
answers
54
views
Juju node is eating up a lot of memory
my Juju node is consuming more than 90% of its RAM.
$ free -m
total used free shared buffers cached
Mem: 3953 3843 109 0 131 ...
1
vote
0
answers
90
views
bootstrap error in juju 1.25
Using juju 1.25 when I tried to bootstrap it hangs and gives error after waiting a long time:
juju version
1.25.3-trusty-amd64
"Attempt 5 to download tools from https://streams.canonical.com/juju/...
1
vote
0
answers
228
views
Juju 2 generating "no current controller, and none specified error"
I am very new to Juju 2 so this might be an error in how to use Juju 2. After bootstrapping, I just want to get the status of my model. So I did the following
$ juju status -m test-model
error: ...
1
vote
1
answer
58
views
Why does destroy-service also destroys the machine?
juju destroy-service command destroys the machine if the machine hosts only the service that is being destroyed.
I find it an inconvenience because:
it does something unexpected
there is an explicit ...
1
vote
0
answers
494
views
Trying to install landscape server. Agent stuck on: Waiting for agent initialization to finish
I am running Juju on Trusty and attempting to install Landscape dense MAAS.
Juju status shows as:
Waiting for agent initialization to finish
I logged into the machine itself. The logs for: ...
1
vote
0
answers
423
views
How do I know if OpenStack is installed on my device or not?
Following this link to install OpenStack, now that I've added the repository ans I got the first interface of selecting Multi, Single or Open Stack Autopilot mode. I selected Single and then enter the ...
1
vote
0
answers
245
views
Landscape Openstack Autopilot Trying to Deploy Juju Gui internal environment
Followed the direction of the link below
Landscape openstack juju management
$juju ssh landscape-server/0 sudo 'JUJU_HOME=/var/lib/landscape/juju-homes/sudo ls -rt /var/lib/landscape/juju-homes/ | ...
1
vote
0
answers
477
views
Can't start an instance due to "(sqlite3.OperationalError) unable to open database file" error
I've just installed OpenStack by Autopilot.
i can't start an instance:
nova start admin_instance_1
Instance e7030ddb-df04-4d7e-b3ca-ac18b744d434 is not ready (HTTP 409) (Request-ID: req-6bfa35ac-...
1
vote
0
answers
156
views
hacluster with galera-cluster
I am trying to build a HA mysql using the following charms
https://jujucharms.com/galera-cluster/trusty/1
https://jujucharms.com/hacluster/trusty/27
I start 3 units of galera-cluster in separate VM ...
1
vote
0
answers
49
views
autopilot deploy fails at 99% - Configure availability zones
I'm having a difficult time with the autopilot deployment of openstack. I have set up a lab where I have a MAAS server with two network interfaces: one that is on my office private network of 10.x.x.x ...