Questions tagged [ceph]

Ceph is a unified, distributed storage system designed for reliability and linear scalability.

Filter by
Sorted by
Tagged with
0
votes
0answers
7 views

Problem deploying ceph. install ca-certificate error

As the Title says Im having problems deploying Ceph to any of my clients. The Error message is as follows.... Ceph error Thanks for any help, Im really struggling with this at the moment.
0
votes
0answers
21 views

Trying to setup Ceph, but falling at the first hurdle

Im trying to set up Ceph on my Ubuntu server for my Dissertation Im trying to make it so my ceph user can access all the ceph nodes pass-wordlessly, however my original user doesnt seem to have ...
0
votes
0answers
168 views

How can I setup ceph-osd on ubuntu server with MAAS (KVM Pod)?

My situation: I have MaaS on Ubuntu server with KVM pod I can create new VMs just fine, I have deployed kubernetes using conjure-up I deployed graylog using juju just fine I followed https://jaas.ai/...
0
votes
1answer
94 views

ceph health warm message on 19.04

I command ceph-deploy mgr create node1 cluster: id: cb144140-f41a-464a-a834-d7817785e149 health: HEALTH_WARN 3 modules have failed dependencies services: mon: 1 daemons, ...
1
vote
1answer
148 views

connect esxi to ceph

I want to connect ceph to esxi My version of ceph is mimic. I've searched a lot and found this My health of ceph is OK. I want to know how can I install iscsi gateway on my ceph Thanks a lot
0
votes
1answer
144 views

Openattic installation for ubuntu 16.04

Can anybody share any reference regarding how to install openattic 3.7 in ubuntu 16.04 if ceph cluster is deployed with ceph-deploy?
0
votes
1answer
1k views

ceph-osd No block devices detected using current configuration

After the deploy of Openstack via Juju the ceph-osd results in blocked $: juju status ceph-osd/0 blocked idle 1 10.20.253.197 No block devices ...
0
votes
1answer
287 views

juju ceph-mon is in error state after servers reboot. hook failed: “config-changed”

I have successfuly setuped openstack 10 days ago. Today I rebooted serves and got next: ceph-mon/0 maintenance executing 1/lxd/0 10.2.200.44 hook failed: "config-changed" ...
1
vote
0answers
250 views

Unable to Launch instance using ceph boot volume

I have deployed Openstack Base bundle cs:~openstack-charmers-next/bundle/openstack-base-xenial-ocata-0 which deploys ceph as storage backend. https://jujucharms.com/u/openstack-charmers-next/openstack-...
2
votes
1answer
2k views

Configuring Ceph VFS on Samba

I'm trying to share out a CephFS filesystem via Samba using the vfs module, but the instructions I can find are all pretty minimal and nothing I have tried works. So far, I have an entry in my smb....
2
votes
1answer
1k views

ceph-osd remains in “blocked” state during juju openstack-base charm bundle installation

I'm new to openstack and juju, trying to install it on a few test machines. I've tried using conjure-up openstack as well as the regular juju charms bundle, unsuccessfully. The farthest I've gotten, ...
0
votes
1answer
493 views

trying to optimize Ceph CRUSH settings to optimal

I'm using Ubuntu 16.04 on all my ceph servers and the ceph client machines. I'm using Ceph jewel release 10.2.3. I'm trying to update/tune the ceph crush variables to optimal: ceph osd crush tunables ...
0
votes
0answers
53 views

How to setup web service cluster using MAAS and JUJU

I have 5 physical servers. The first server has been designated for MAAS and has MAAS 2.0.0 installed and running. The other 4 servers have been commisioned and ready in MAAS. What I would like to ...
3
votes
0answers
42 views

No throughput, but download locks up ssh session.

So this is really odd to me. First, I guess, here is my setup: root@kh13-9:/var/log/radosgw# cat /etc/*release* DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.04 DISTRIB_CODENAME=trusty DISTRIB_DESCRIPTION="...
1
vote
1answer
857 views

which storage scenario to choose with openstack? Ceph cluster, or SAN

We are building an OpenStack cloud in my organization. My original plan was to work with a Ceph cluster as back-end for Cinder, Glance and Swift. But we have a Dell SC series SAN in the datacenter ...
2
votes
1answer
687 views

mount cephfs did't work after reboot

I added this line: 10.10.10.10:6789:/ /mnt/ceph ceph name=admin,secretfile=/etc/ceph/secret.key,noatime 0 2 to /etc/fstab in all of my nodes and executed "mount -a" and works good ...
0
votes
1answer
627 views

Ceph drive failure and replacement procedure

In my OpenStack deployment I'm using Ceph for block and object storage, which is reporting a healthy status. However, one of the hard drives is displaying a SMART error. I don't remember the exact ...
16
votes
3answers
4k views

Is there a way for MaaS to Commission a Raspberry Pi 3B?

I have a small lab (literally) of 3 RBP-3B units with SATA and SD drives attached running Ubuntu 16.04 LTS. I have installed software on them to create a Ceph cluster but its tricky and pretty ...
0
votes
1answer
482 views

ceph cluster got created, OSDs got initialized, but total cluster space shows 0 bytes available

I am trying to create a ceph cluster. I've installed ceph on 3 computers and added their names to hosts files. Created passwordless ssh login. Installed and configured ntp server and checked, that all ...
0
votes
1answer
487 views

have problem with ceph fs mount

I want to mount CephFS with the kernel driver, but when I execute this command on my admin node mount -t ceph 192.168.0.164:6789:/ /mnt/mycephfs The admin node hangs! and I have to reset my machine. ...
0
votes
2answers
284 views

ceph fs mount error

I want to mount ceph fs with the kernel driver, but when I excute below command on my admin node mount -t ceph 192.168.0.164:6789:/ /mnt/mycephfs it return below error mount error 5 = Input/output ...
4
votes
2answers
640 views

OpenStack MAAS second hard disk recommendation?

I am a newbie when it comes to OpenStack with MAAS and AutoPilot. I would like to create my own private cloud with Ubuntu 14.04LTS and MAAS 1.9. My goal is to have a decent set up I can use to ...
1
vote
0answers
168 views

How does the block-device config setting on the LXD Juju charm work?

I am deploying Openstack using the Juju Openstack LXD bundle. With this bundle block storage is provided by a Ceph cluster. The LXD charm has a block-device config setting that defaults to /dev/sdb....
0
votes
2answers
798 views

Missing ceph vfs module for Samba

I am trying to use the samba ceph vfs module. I installed samba-vfs-modules but the ceph.so module doesn't show up in /usr/lib/x86_64-linux-gnu/samba/vfs/ This mailing list post would seem to ...
1
vote
2answers
814 views

Clarification needed on Juju deployment of the Ceph charm

I have 3 servers that I want to use as a storage cluster in a PoC Openstack set up. Each server has a small /dev/sda for the OS, etc. and a large /dev/sdb I hope to use as storage by Ceph. I can ...
1
vote
1answer
410 views

ceph version on ubuntu ports repository for armhf [duplicate]

I'm trying to install the lastest version of ceph on my armhf platform. I have already updated my installed release of ubuntu to the latest development of Xenial. problem is, everytime i check, i ...
1
vote
0answers
112 views

ceph-radosgw charm with ssl

Is there a way to setup juju's ceph-radosgw to use HTTPS (using only charms)? I had a look at haproxy (to do SSL-offload), but haproxy doesn't seem to have a way of giving it a VIP or name to listen ...
2
votes
1answer
146 views

Can autopilot use an existing Ceph cluster?

If I already have an existing Ceph cluster, can Autopilot build an OpenStack cloud that makes use of it? Or does Autopilot want to set the whole thing up itself?
0
votes
3answers
1k views

How to pass the command “--overwrite-conf” in ubuntu terminal?

Please see my screenshot below:
2
votes
2answers
3k views

error while installing ceph storage cluster quick start on Ubuntu

I am facing the following errors: [ceph_deploy.mon][ERROR ] RuntimeError: config file /etc/ceph/ceph.conf exists with different content; use --overwrite-conf to overwrite [ceph_deploy][ERROR ] ...
1
vote
1answer
195 views

Can bundle https://jujucharms.com/openstack-base/39 be used for ppc64el environment

Introduction My IBM team is about to finish setup of 4 server VMs and the maas (and juju) deployment server. The next step is to build out the OpenStack-Base (39) environment via juju as specified ...
2
votes
0answers
40 views

Ceph cannot reformat because disk is mounted

I am using MaaS 1.8, trying to use the juju-deployer with juju-deployer -c config.yaml -d vivid-kilo -e envName Here is my config. http://pastebin.com/TsvdnSKA Here is the error output: http://...
3
votes
1answer
833 views

Installing Ubuntu OpenStack requires at least five machines with two disks, two of which have two network interfaces. Why?

Installing Ubuntu OpenStack requires at least five machines with two disks, two of which have two network interfaces (NICs). Install Ubuntu Server on one of the machines with two interfaces. Why do I ...
1
vote
1answer
270 views

Ubuntu 14.04.2 ceph upgrade to Ceph 0.94.1

How are you guys doing the Ceph upgrade in Ubuntu 14.04 controlled by Juju ? Are you upgrading the distro to 15.04 ?
1
vote
2answers
185 views

Look into ceph resiliance on openstack autopilot

I now have a 7 node openstack cluster created via landscape/autopilot. I chose ceph for everything. After getting into juju / looking into ceph. juju ssh ceph/0 root@topdesk:~# rados df pool name ...
2
votes
1answer
177 views

Dell servers, OpenStack and Autopilot Beta … can they work together?

I am trying to bring up OpenStack using the Autopilot beta release. I am using all iron (physical servers). All Dell PowerEdge servers, to be specific, I am using: 2 x r310 servers 3 x r415 servers 2 ...
1
vote
2answers
176 views

configuring all interfaces from MAAS

I have a set of machines in MAAS with 4 nics. How do I get a juju deploy to bring up all nics? My Ceph deploy is failing because the right interfaces have not been brought up.
1
vote
4answers
3k views

Simplest way to set up new user with SSH access on remote host, given root access

I am writing a tutorial on setting up Ceph the hard way, shell all the way. I am not happy with the number of ssh commands it takes to connect to a remote host as root, create new user, then scp keys ...
2
votes
1answer
754 views

juju deploy ceph 'hook failed: “mon-relation-changed”'

I am running ubuntu 14.04.1 with juju 1.21.3 and deployed ceph to a machine with Intel Virtualization turned off in the bios. It failed with hook failed: "mon-relation-changed". I rebooted the machine ...
5
votes
1answer
332 views

juju deploy ceph hangs in pending in maas environment

I have ubuntu 14.04.1 with maas 1.7.1 rc4 and juju 1.20.14. My client machine is commissioned and deployed. I can ssh ubuntu@cl1stn2.maas and I can juju ssh 1 successfully. I did "juju deploy --...
2
votes
4answers
981 views

Architecture of a virtual OpenStack deployment (Juju/MAAS) with 1 physical node

I'd like to demonstrate some of OpenStacks HA/FT features (most importantly live migration and storage replication). For that purpose, I have a machine with 32 GB RAM and a Xeon e3v2 with 4 cores (8 ...
4
votes
1answer
196 views

Openstack deployment fails at 99% Configure Availability Zones

Using the newly released Landscape deploy for Openstack, I've gotten to 99% completion, with 1 failure citing Configure Availability Zones. error I have received Unsupported Scheme: '' I'm going ...
2
votes
1answer
3k views

Installing ceph on a single machine with cephdeploy ubuntu 14.04 64 bit

I am unable to figure out how to install and deploy ceph on a single machine with ceph deploy. I have ubuntu 14.04 and have installed devstack. I am trying to install ceph on the same machine and ...
4
votes
1answer
556 views

Problems with Ceph installation in Juju deployed OpenStack environment

We are running in to an issue setting up ceph to be used as backend for cinder using the charms. Our environment consists of OpenStack icehouse on Ubuntu 14.04 (Trusty). Most of the documents on ceph ...
2
votes
0answers
284 views

Glance and ceph hook-failed “ceph-relation chaged”

I have installed glance in one machine and ceph in another machine using juju. Ceph is running on one machine but I try to establish a relation between glance and ceph it always shows hook-failed. ...
1
vote
1answer
751 views

How can I configure the public and cluster network with the juju ceph charm

I deployed ceph via juju and the ceph charm. My servers have 3 NIC's (eth0 for management, eth1, public storage network, eth2 for cluster network). When I deploy ceph via juju it installs all the ...
0
votes
1answer
1k views

mount error = 5 when mounting ceph cluster

Im using MAAS and juju to configure a small 3 node test cluster. I have followed the Ceph charm read me instruction. Now I want to mount the ceph cluster. I've created a secret file from the /etc/...
0
votes
1answer
292 views

Ceph did not deploy to machine 0 why?

Love juju and this ceph charms is great. Can you help with this issue ... I have deployed the ceph charm to a MAAS cluster of 3 nodes (machine: 0, 1, & 2) I used this command to deploy: juju ...
5
votes
3answers
3k views

Juju remove units stuck in dying state so I can start over?

I have machines running on MaaS using Juju. Some of them failed to deploy because a hook didn't run because of an (invalid) setting I set in the config. In the Jju UI, I tried marking them as ...
2
votes
1answer
2k views

Installing ceph and ceph-osd charms on same machine?

I have 3 ceph nodes, I have decided to install ceph monitor plus ceph osd on all 3 servers. In order to do that I deployed 1st ceph charm on all 3 nodes. Till here everything was fine, I was even able ...