I tryed to run DVB-T2 channels with Astrometa DVB-t2 on Ubuntu.
I installed Linux firmware nonfree and media build.
After this I installed w_scan.
If I scan channels with
w_scan I make
channels.xpsf file for VLC, but VLC is not playing channels form channel list.
VLC sees channels in the channel list but doesn't run any channels.
Is it possible to make this device to work properly in Ubuntu ?
This is: dmesg | grep -i dvb
$ dmesg | grep -i dvb [ 5699.368610] usb 1-1.3: Product: dvbt2 [ 5699.368613] usb 1-1.3: Manufacturer: astrometadvbt2 [ 5699.592569] usb 1-1.3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state [ 5699.673012] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 5699.673035] DVB: registering new adapter (Astrometa DVB-T2) [ 5699.848970] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 5699.849151] usb 1-1.3: DVB: registering adapter 0 frontend 1 (Panasonic MN88473)... [ 5699.971702] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input14 [ 5699.972829] rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0 [ 5699.981172] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ 5699.990461] usb 1-1.3: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected [ 5699.990558] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 5700.009679] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input15 [ 5700.025429] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0 [ 6427.072346] mn88473 8-0018: downloading firmware from file 'dvb-demod-mn88473-01.fw'