10

What I want to do is write a script which first launches a program and then tells it to execute a bunch of commands and then quit. Lets go with an example.

I wrote this script myscript.sh and it doesn't work the way I want it to. What it does is just run gnuplot and wait for it to quit and then runs the other commands; which obviously produces errors.

#!/bin/bash
gnuplot
plot sin(x)
pause -1
quit

I guess it is clear what I'm trying to do; if not, then let me know in the comments.

11

From man gnuplot or its online manpage:

   -p,  --persist  lets  plot  windows  survive after main gnuplot program
   exits.

   -e "command list" executes the requested commands  before  loading  the
   next input file.

So what you probably want to run is the following command:

gnuplot -e "plot sin(x); pause -1"

Other variants I proposed but which are not that useful were:

gnuplot -p -e "plot sin(x); pause -1"
gnuplot -e "plot sin(x)"
gnuplot -p -e "plot sin(x)"
  • The first 2 produce exactly the desired output. Although -p is not of much use in this example; if you press enter in the terminal, gnuplot exits and the plot window becomes completely non interactive, except for the quit command. Output of 3rd just comes and goes (not visible at all). The last one produces output, but since gnuplot closes immediately, the plot window is again non interactive (also, it shows a tiny 1square cm plot). So pause -1 is necessary. – Mihir Gadgil Nov 24 '15 at 22:45
  • @MihirGadgil Thanks for the feedback. Edited my answer. – Byte Commander Nov 25 '15 at 15:24
13

One way is with -persist:

#!/usr/bin/gnuplot -persist
set title "Walt pedometer" font ",14" textcolor rgbcolor "royalblue"
set timefmt "%y/%m/%d"
set xdata time
set pointsize 1
set terminal wxt  enhanced title "Walt's steps " persist raise
plot "/home/walt/var/Pedometer" using 1:2 with linespoints

another way, if you need to preprocess data, is with a Bash Here Document (see man bash):

#!/bin/bash
minval=0    # the result of some (omitted) calculation
maxval=4219   # ditto
gnuplot -persist <<-EOFMarker
    set title "Walt pedometer" font ",14" textcolor rgbcolor "royalblue"
    set timefmt "%y/%m/%d"
    set yrange $minval:$maxval
    set xdata time
    set pointsize 1
    set terminal wxt  enhanced title "Walt's steps " persist raise
    plot "/home/walt/var/Pedometer" using 1:2 with linespoints
EOFMarker
# rest of script, after gnuplot exits
  • 1
    This (the "here-doc" shell method) is probably the generic answer the OP looked for. It will work for a lot of command-driven programs (and if not, you can escalate to expect... – Rmano Nov 24 '15 at 18:38
  • Moreover you can make executable the scripts with chmod u+x myscript.gnu and execute directly with ./myscript.gnu Just a note you forget the [] in the yrange: set yrange [$minval:$maxval]. – Hastur Jun 3 '16 at 9:13
3

As explained in the man pages, gnuplot expects input from a command file in what is called an batch session. You can e.g. write the line plot sin(x) to a file myplot and then execute gnuplot myplot.

If you omit the command file, as your script does, you will get an interactive session.

  • Okay, I get it that its jumping into an interactive session, but is there no way to feed commands into that interactive session through the same sctipt? Also, could you give a more general answer (not specific to gnuplot)? Thanks! – Mihir Gadgil Nov 24 '15 at 14:30
  • No, not all applications process input the same way. There is no way to generalize that. – Jos Nov 24 '15 at 14:34
  • @MihirGadgil - not all programs work the same way... which other ones do you want to use? – Wilf Nov 24 '15 at 14:35
  • @Jos Oh, I see, thanks! Wilf I have used linux in the past but not extensively, now trying to learn more. I don't have any such programs in mind; just trying to learn as much as I can from this one problem. – Mihir Gadgil Nov 24 '15 at 15:31
0

The here-doc method mentioned is highly useful with Gnuplot and with many other programs as well. By using shell variables within the Gnuplot commands in the here-doc, you can parameterize your plots with inputs from your shell script's command line. By cagily setting things up, you can mass-produce plots from vast troves of "big data." I used to produce consistent-looking scatter plots with 20,000 to 80,000 points PER PLOT in hundreds of structural dynamics finite analysis runs using exactly this method. It's a very powerful method.

  • 1
    To make your answer complete, could you add an example how to use the mentioned here-doc method? – Melebius Apr 9 '18 at 7:38
0

This might help

{#set terminal postfile             
{#set output  "d1_plot.ps"        
set title "Energy vs. Time for Sample Data"    
set xlabel "Time"    
set ylabel "Energy"    
plot "d1.dat" with lines   
pause -1 "Hit Enter to continue"

click here for more details

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.