1. How do I globally map Caps Lock to AltGr?

I don't need CapsLock and rather would like to have an easy access AltGr Key there

2. I want to map all movement keys to vim-like positions

  • AltGr+F = Backspace
  • AltGr+H = LeftArr
  • AltGr+J = DownArr
  • AltGr+L = RightArr
  • AltGr+K = UpArr
  • AltGr+U = PgUp
  • AltGr+D = PgDown
  • AltGr+S = Enter
  • AltGr+3 = Pos1
  • AltGr+$ = End
  • AltGr+X = Del

So I can easily walk through my code without moving the hand away from the 10-Finger-Position (like in vim editor)

I found this answer: How do I remap the caps lock key to the backspace key?
suggesting using

xmodmap -e "keycode [code] = [new key]"

see: http://wiki.linuxquestions.org/wiki/List_of_Keysyms_Recognised_by_Xmodmap

But I cannot figure out, how to add this to a combination of for example AltGr+J

Another start would be to set the "Alternative Character Key" in unity-control-center->Keyboard->Shortcuts->Typing as Caps Lock

Update: I found some solutions (see below) but all of them don't work in all applications, I guess it is a global setting called "XFree 4" that is used by some apps.

How do I set the key bindings for XFree 4 also?

up vote 2 down vote accepted

You have to edit /usr/share/X11/xkb/symbols/de (where /de is your language) and add this section in the first block, that you use in your language:

            # replace Caps with AltGr
            key <CAPS> { [ ISO_Level3_Shift            ] };
            # Add vim cursor keys to be accessed with AltGr
            key <AB02> { [ x, X, Delete, Delete        ] };
            key <AC02> { [ s, S, KP_Enter, KP_Enter    ] };
            key <AC03> { [ d, D, Next, Next            ] };
            key <AC04> { [ f, F, BackSpace, BackSpace  ] };
            key <AC06> { [ h, H , Left, Left           ] };
            key <AC07> { [ j, J, Down, Down            ] };
            key <AC08> { [ k, K, Up, Up                ] };
            key <AC09> { [ l, L, Right, Right          ] };
            key <AD07> { [ u, U, Prior, Prior          ] };
            key <AE03> { [ 3, section, Home, Home      ] };
            key <AE04> { [ 4, dollar, End, End         ] };

log out and in again so this will be available. Only some applications don't accept the settings, for example: yakuake which can be replaced by guake, and sublime which can be replaced by atom.

EDIT: I found out, that in yakuake the Key-Bindings are set to "XFree 4", If you set this to Liux or Solaris, then the XKB settings works there also:

  • 1
    i strongly recommend using the XKB option lv3:caps_switch instead of changing the <CAPS> definition as you show. see /usr/share/X11/xkb/symbols/level3 (where that option is defined). – quixotic Apr 4 '17 at 13:49
  • @quixotic: can you add a new answer with the configurations that would be needed? I could need a good complete answer here for the bounty ;) – rubo77 Apr 4 '17 at 16:27
  • This worked perfectly for me. Just a heads up though, might want to change "section" to "numbersign" for shift+3 – mowwwalker Feb 27 at 23:11

To remap CapsLock to AltGr use

xmodmap -e "keycode 66 = ISO_Level3_Shift"

(source: https://superuser.com/a/138757/160420)

To map the arrow keys to AltGr + h,j,k and l, use xmodmap -pke to find the right settings:

xmodmap -pke|egrep "f F|j J|k K|h H|l L|o O|u U|d D|dollar|BackSpace"

and change the fifth value to the new keys and add this all in a bash script:

# xrandr needs the desktop to be fully loaded. add a delay, to be able to add it to Startup Applications:
sleep 15
# change BackSpace into AltGr
xmodmap -e "keycode 66 = ISO_Level3_Shift"
# set BackSpace on AltGr + F
xmodmap -e "keycode 41 = f F f F BackSpace BackSpace dstroke ordfeminine f F dstroke ordfeminine"
# create arrow keys at h,j,k,l
xmodmap -e "keycode  43 = h H h H Left Left"
xmodmap -e "keycode  44 = j J j J Down Down"
xmodmap -e "keycode  45 = k K k K Up Up"
xmodmap -e "keycode  46 = l L l L Right Right"
xmodmap -e "keycode  30 = u U u U Prior Prior"
xmodmap -e "keycode  40 = d D d D Next Next"
xmodmap -e "keycode  12 = 3 section 3 numbersign Home Home"
xmodmap -e "keycode  13 = 4 dollar 4 dollar End End"
xmodmap -e "keycode  53 = x X x X Delete Delete"

(source: https://askubuntu.com/a/466315/34298)

Put that bash script in your Startup Applications (Chooe Dash > Startup Applications > Add, and add the command.)

Note: strangely in gnome-terminal this works fine, but in yakuake it works for BackSpace on AltGr+F but it sets AltGr+h,j,k and l to D,B,A and C unless you set the Key Binding to "Linux" instead of "(Default) XFree 4", and in sublime-text it doesn't work at all

  • xmodmap is deprecated and discouraged. it still works in X11 environments but will not work in Wayland and other X11 replacements. using XKB-based solutions instead is highly encouraged. – quixotic Mar 28 '17 at 22:35
  • So I guess, I have to add a new custom keyboard layout then? askubuntu.com/questions/482678/… – rubo77 Mar 28 '17 at 22:55
  • 1
    adding a custom layout is one way, though you can probably get away with just making a custom option. in GNOME or Unity you may need to disable settings-daemon's keyboard plugin for your xmodmap customization to work, but if you make a new system-wide XKB layout/variant/option you can set them in /etc/default/keyboard. – quixotic Mar 28 '17 at 23:48
  • 1
    This seems quite a lot of work, but will it solve the problem, that the new key combinations dont work in some apps? – rubo77 Mar 29 '17 at 13:29

in order to get AltGr+h, j,k,l or any other key without any application like Autokey to peform you can customize your keyboard layout found in /usr/share/X11/xkb/symbols/. At the moment I use the german layout "de". So first of all I would:

1- copy the standard layout

cp /usr/share/X11/xkb/symbols/de /usr/share/X11/xkb/symbols/de.bak

2- open your layout with your text editor of preference (here: gedit)

sudo gedit /usr/share/X11/xkb/symbols/de 

there you gonna see something like:

key <AD03>  { [         e,          E,     EuroSign,     EuroSign ] };
key <AD06>  { [         z,          Z,    leftarrow,          yen ] };
key <AD11>  { [udiaeresis, Udiaeresis, dead_diaeresis, dead_abovering ] };
....
....
key <AD12>  { [      plus,   asterisk,   dead_tilde,  macron ]  };
key <AC02>  { [               s,               S,          ssharp,          U017F ] }; 
key <AC06>  { [               h,               H,            Left,             Left ]   }; 
key <AC07>  { [               j,               J,            Down,             Down ]   }; 
key <AC08>  { [               k,               K,              Up,               Up ]   }; 
key <AC09>  { [               l,               L,           Right,            Right ]   }; 
....
....
key <AB10>  { [     minus, underscore,               endash,     emdash ] };
key <LSGT>  { [     less,     greater,                  bar,     NoSymbol   ] };

As you can see, AB, AC, AD, AE represents the row, and the number represents its position on the keyboard (there are some special keys, like the less/greater key, which can be remapped to other keys as well..

There you will not find all the keyboard, just the ones that is diferent that the layout the keyboard is based on. The german one is based on "latin(type4)" as you can see on the beggining of the file:

include "latin(type4)"

Then you just need to change according to your needs. It works like:

key { [ key, key+shift, key+AltGr, key+Shift+AltGr ] };

(its also possible the add 5th level modifiers, or more)

if you want to check the changes without restart; (changing "de" for your layout... here is a list with possible layouts )

 setxkbmap -layout de

The arrows are labelled just like "Left, Right, Down, Up", as expeceted. Here is a good list of possible values.

here is a example of my custom layout. (but not in use at the moment)

Then, you would need to remap Capslock and AltGr, or did it work already following the question you posted??

If you also want to keep a "normal" german layout, you can do the changes to another layout you dont normally use, (or change the "german no dead keys" which you can find further down at the same "de" file...)

Source: link to a very comprehensive explanation of xbk and custom layouts.
link to a similar question with a good answer.

  • in modern Ubuntu and derivatives, you can set XKB layouts and options in /etc/default/keyboard once these changes are made. see man 5 keyboard for details. i recommend adding new variants & options rather than changing existing ones. – quixotic Mar 28 '17 at 22:37

Your Answer

 

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service, privacy policy and cookie policy, and that your continued use of the website is subject to these policies.

Not the answer you're looking for? Browse other questions tagged or ask your own question.