Is there a way to disable a touchpad using a terminal command?
7 Answers
To turn off touch pad:
synclient TouchpadOff=1
To turn it back on:
synclient TouchpadOff=0
-
-
11
-
-
3The command ran without error on my Ubuntu 14.04 LTS on Dell XPS 13 but had no effect. Feb 23, 2016 at 3:53
-
Toggle would be nice -- I would like to set it up as a short cut or something. Better yet, when it's docked, I want the touchpad off Mar 17, 2016 at 5:00
There are at least two methods (that I know of) you could try.
synclient
If your laptop is equipped with a Synaptics (or ALPS) touchpad you can indeed use synclient
as already mentioned by Shutupsquare. I'm running Ubuntu 14.04 and on my machine it was installed by default.
Test if synclient is installed: synclient -V
(it should report the version number)
Turn touchpad ON: synclient TouchpadOff=0
Turn touchpad OFF: synclient TouchpadOff=1
I have not tested this myself, but if your goal is to not move the mouse when your arms are resting on the touch pad, this might help.
Turn palm detection ON: synclient PalmDetect=1
Turn palm detection OFF: synclient PalmDetect=0
In general you can configure any property of your Synaptics touchpad by synclient property=value
. Where the property is one of the available properties shown by synclient -l
Links for further reading
ubuntu - comminity help wiki - SynapticsTouchpad
archlinux - wiki - Touchpad Synaptics
ask ubuntu - How do I make my synclient settings stick? - Ubuntu
xinput
If you do not want or cannot use synclient, you could also use xinput
. The procedure is somewhat similar.
list all xinput devices: xinput
Part of the ouput could look like this:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB-PS/2 Optical Mouse id=13 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=17 [slave pointer (2)]
It this particular case my touchpad has id=17 and its full name is "ETPS/2 Elantech Touchpad".
The command to set a property is xinput set-prop
. The property to enable or disable the touchpad is Device Enabled
, so to enable or disable it type:
Turn touchpad ON: xinput set-prop <id> "Device Enabled" 1
(where <id>
is your device id, in my case 17)
Turn touchpad OFF: xinput set-prop <id> "Device Enabled" 0
Turn palm detection ON: xinput set-prop <id> "Palm Detection" 1
Turn palm detection OFF: xinput set-prop <id> "Palm Detection" 0
To query available properties: xinput list-props <id>
OR xinput list-props <full-name>
, this should be quite similair to synclient -l
.
Links for further reading
NOTE
When setting properties through either xinput
or synclient
the properties are not set to the other tool. They are also not set in unity-control-center.
-
2Thanks for the second answer.
synclient
didn't work for me,xinput
did. Nov 18, 2014 at 12:18 -
2Note that
xinput
ids can change over restarts. So relying on these ids in scripts or shortcuts won't work.– LodeJul 17, 2015 at 17:47 -
synclient
totally works on Arch Linux. Thank you so much!!! Dec 15, 2016 at 17:24 -
This did it for me. In particular, I discovered I need to run
xinput <enable/disable> <id>
, as settingTouchpadOff
viasynclient
was ineffective. Mar 24, 2018 at 14:43 -
Thank you for the introduction to
xinput
. I was in a bit of a pickle with my builtin keyboard and trackpoint buttons apparently sending bad inputs that interfered with the input from the external keyboard. This allowed my to disable the builtin devices. Cheers! :)– sjakobiJun 13, 2019 at 21:40
synclient
and xinput
will not work if you are using gnome (or unity, cinnamon) environment, because it will override settings, so if you want synclient
or xinput
to take over these settings, you should disable that first:
install
dconf-editor
if not installed:apt-get install dconf-editor
run
dconf-editor
dconf-editor
open the directory
/org/gnome/settings-daemon/plugins/mouse/
or/org/cinnamon/settings-daemon/plugins/mouse/
, and unclick the checkbox foractive
.logout
orreboot
This should make synclient
or xinput
work.
I wrote a python piece of code (now updated from python2 to python3) so that you can use the xinput
technique without doing all the manual work. Copyleft, AS-IS, no warranty, use at your own risk. Works great for me: and if you are using gnome, just map it to a key shortcut like CtrlShiftT.
#!/usr/bin/python3
# -*- coding: utf-8 -*-
'''Program to toggle Touchpad Enable to Disable or vice-versa.'''
from subprocess import check_output
import re
def current_id():
""" Search through the output of xinput and find the line that has the
word Touchpad. At that point, I believe we can find the ID of that device.
"""
props = check_output(["xinput"]).decode("utf-8").splitlines()
match = [line for line in props if "Touchpad" in line]
assert len(match) == 1, "Problem finding Touchpad string! %s" % match
pat = re.match(r"(.*)id=(\d+)", match[0])
assert pat, "No matching ID found!"
return int(pat.group(2))
def current_status(tpad_id):
"""Find the current Device ID
- it has to have the word Touchpad in the line."""
props = check_output(
['xinput','list-props',str(tpad_id)]).decode("utf-8").splitlines()
match = [line for line in props if "Device Enabled" in line]
assert len(match) == 1, "Can't find the status of device #%d" % tpad_id
pat = re.match(r"(.*):\s*(\d+)", match[0])
assert pat, "No matching status found!"
return int(pat.group(2))
def flop(tpad_id, status):
"""Change the value of status, and call xinput to reverse that status."""
if status == 0:
status = 1
else:
status = 0
print("Changing Device #",tpad_id," Device Enabled to ",status)
props = check_output(['xinput',
'set-prop',
str(tpad_id),
'Device Enabled',
str(status)])
def main():
"""Get curent device id and status, and flop status value."""
tpad = current_id()
stat = current_status(tpad)
flop(tpad, stat)
main()
List your input devices:
xinput list
In my case I have this list:
Virtual core XTEST pointer id=4 Logitech M510 id=11 ETPS/2 Elantech Touchpad id=15
Disable your touchpad by passing the ID
xinput set-prop 15 "Device Enabled" 0
-
1When typing manually, you can use
xinput enable [device]
andxinput disable [device]
directly. When scripting though, usingset-prop [device] "Device Enabled" [value]
may be a bit easier, as in World Python Developer's answer.– hsandtOct 24, 2018 at 13:48
Disable any touchpad in a single command, good for a script.
xinput list |
sed '/Touch[Pp]ad/!d; s/.*id=//;s/\s.*//' |
xargs -i xinput --disable {}
On Gnome, my function key to toggle the touchpad was not working for some reason, so I made a script using gsettings.
- Advantage: not vendor-specific
- Disadvantage: on Gnome, the touchpad clicks (not tap) are still handled for some reason, whereas the
xinput
solution completely deactivates the touchpad as expected. If like me, your only problem is that you are inadvertently moving the cursor while typing, though, that will be enough.
toggle_touchpad_gsettings.py
#!/usr/bin/python3.6
import sys
import subprocess
gsettings_schema, gsettings_key = "org.gnome.desktop.peripherals.touchpad", "send-events"
def get_touchpad_send_events():
send_events_value = subprocess.check_output(["gsettings", "get", gsettings_schema, gsettings_key])
return send_events_value.strip()
def toggle_touchpad():
# string returned from get is a repr including quotes,
# but string sent with set does not need to have quotes
if get_touchpad_send_events() == b"'enabled'":
newval = 'disabled'
else:
newval = 'enabled'
subprocess.Popen(["gsettings", "set", gsettings_schema, gsettings_key, newval])
print(f"Set {gsettings_schema}:{gsettings_key} to {newval}")
def main():
toggle_touchpad()
if __name__ == '__main__':
main()
It should also work on Unity, but I haven't tested.