I tried to use openconnect as alternative cisco-pvn client.
When connecting to the vpn, my internet connection gets lost but my intranet connection works. This is a common problem and the suggestion here seems to be to select the "use connection only for resources from this network" option in "routes".
When I do this, my internet connection works again, but the intranet connection is lost :/. I don't know anything about routing but I think it has sth. to do with subnetworks.
When i'm connected to vpn ifconfig shows:
vpn0 Link encap:UNSPEC Hardware Adresse 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet Adresse:192.168.202.132 P-z-P:192.168.202.132 Maske:255.255.255.128
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1300 Metrik:1
RX-Pakete:808 Fehler:0 Verloren:0 Überläufe:0 Fenster:0
TX-Pakete:495 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:500
RX-Bytes:878695 (878.6 KB) TX-Bytes:49437 (49.4 KB)
wlan0 Link encap:Ethernet Hardware Adresse xxx
inet Adresse:192.67.206.156 Bcast:192.67.207.255 Maske:255.255.254.0
inet6-Adresse: fe80::e8b:fdff:fe5c:aa94/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX-Pakete:238884 Fehler:0 Verloren:0 Überläufe:0 Fenster:0
TX-Pakete:103752 Fehler:0 Verloren:0 Überläufe:0 Träger:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX-Bytes:108169969 (108.1 MB) TX-Bytes:13063577 (13.0 MB)
When I ping domains inside the intranet they return "146.140.28.5" or "146.140.1.88" which doesnt look like it's in the vpns ip range.
So how can I configure openconnect to allow internet connection but use vpn for all 146.140.x.x adresses?
The routing table:
Ziel Router Genmask Flags Metric Ref Use Iface
0.0.0.0 192.67.207.254 0.0.0.0 UG 0 0 0 wlan0
146.140.192.20 192.67.207.254 255.255.255.255 UGH 0 0 0 wlan0
146.140.202.0 0.0.0.0 255.255.255.192 U 0 0 0 vpn0
192.67.206.0 0.0.0.0 255.255.254.0 U 9 0 0 wlan0
Regards, Lukas
