0

I have looked everywhere but i can't seem to find an answer

I Have a laptop (Acer V3-5726-54S6) 1tb 8gbRam with an integrated intel gpu and a Nvidia GT840m(2gb). Running Ubuntu 14.04 with cinnamon and mdm

i'm trying to get the nvidia card to work with cinnamon using mdm but i can't seem to get it to work. i've tried

  • bumblebee. editing bumblebee.conf. editing xorg.conf.nvidia
  • bumblebee with nvidia-340 driver,
  • bumblebee with nvidia-331
  • bumblebee with nvidia-337
  • bumblebee with nvidia-current -- nvidia drivers (from website and xorg-edgers ppa)
  • nouveau drivers

when i used bumblebee i tried

    $ optirun (any program)

and i got back

[ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ERROR]Aborting because fallback start is disabled.

this happened on all the different drivers i used (331,337,340,current) so i uninstalled bumblebee* and nvidia* tried installing nvidia drivers from the website but that crashes cinnamon.

tried installing the driers without bumblebee (331,340)

selected lightdm when it gave me the option, rebooted, and i got a black screen after boot splash screen. when i chose mdm, cinnamon crashed...

also

$ lspci | egrep 'VGA|3D'

and got back

00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)

03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

any help?

  • also i tried enabling fallback in bumblebee but that just switched to the intel card – Aj Dich Feb 23 '15 at 10:31
0

First of all, I am not sure if I will help you with this, but I am currently unable to comment on your question.

I am assuming that you have followed this sequence:

sudo apt-get install linux-headers-generic
sudo apt-get install bumblebee primus primus-libs-ia32

than nvidia driver:

sudo add-apt-repository ppa:xorg-edgers/ppa 
sudo apt-get update
sudo apt-get install nvidia-xxx

or

sudo apt-get install bumblebee-nvidia

in the end, reinstall bbswitch-dkms:

sudo apt-get install --reinstall bbswitch-dkms

Edit configuration files, reboot.

If not:

sudo apt-get remove --purge nvidia-xxx
sudo apt-get remove --purge bumblebee

If you have bumblebee-nvidia, replace it in code. Now reinstall everything starting from the top.

I can report that nvidia-346 won't work, you will just get a black screen after reboot, and will have to purge nvidia and x-server and reinstall x-server to get system back to normal.

I think that there is no way of safely installing nvidia driver conventionally (from nvidia-XXX.run) on Optimus systems, I have tried that few times and failed.

How exactly did you edit bumblebee, bumblebee.conf, xorg.conf.nvidia?

I've been getting that error when I happened not to have right driver name specified in bumblebee.conf.

I will give you my bumblebee.conf under the text. Have in mind that I am using default driver (bumblebee-nvidia). We are using the same OS.

However, I think the problem will latter arise in BusID line in xorg.conf.nvidia. As you can see, BusID of your nvidia card is 03:00.0, and yet, default BusID in nvidia.conf file is 01:00:0. Currently, line is like this:

#   BusID "PCI:01:00:0"

You need to remove hashtag and change the value, so that it would be like this:

    BusID "PCI:03:00:0"

Try out my bumblebee.conf, edit BusID in xorg.nvidia.conf, and see what happens. I hope this will be of any help.

Waiting for respond.

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=virtualgl
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=bbswitch
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=bbswitch
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
  • I am using virtualgl as a bridge, as you can see. If you want primus instead, change Bridge=virtualgl into Bridge=primus. – gogeccc Feb 25 '15 at 17:35
  • didn't help, but thanks... i installed windows in a separate partition so it's all good – Aj Dich Feb 26 '15 at 20:21

Your Answer

By clicking "Post Your Answer", you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.