Can anyone please suggest a free server (that works just like terminal server which allows multiple rdp-like independent sessions) that is compatible for ubuntu 14.10?

I have tried: Simultaneous remote connections

I googled FreeNX but most of the tutorials available are not working for ubuntu 14.10 and also NOMACHINE does not allow multiple sessions.. NOMACHINE works great but restricted to only one session.. when I connect from second account it get disconnected..

https://www.nomachine.com/AR10K00703 "NoMachine (free) allows one connection. Hence it is for individual use."

And also I have tried http://www.xrdp.org using this tutorial https://www.youtube.com/watch?v=gFdBSyy4xcM

It's also not working.. stuck in a blank rdp screen..

VNC is not what I'm looking for since it cant offer independent sessions..

Most of the tutorials are for old Ubuntu versions and not working for me Any help would be greatly appreciated!! Any basic current tutorial 14.10 or anything which shade light please!

PS What worked ultimately was VNC


Here are the things worked for me.. (success using this tute http://www.howtoforge.com/how-to-install-vnc-server-on-ubuntu-14.04 and kudose for Charles Tassell for right directions and advice)

What I did is as follows,

(1) run sudo apt-get update && sudo apt-get upgrade

(2)run sudo apt-get install gnome-core xfce4 vnc4server

(3)then add users (vncserver/unix)

sudo adduser test1   

(you will have to fill details afterwards for the user, I have added 3 users (test1, test2, test3 etc for vnc server)

(4)Then you have to switch users one by one and run vncserver and add password for vncuser login (I have three vnc users, so that i had to repeat this for all three user test 1, test2, test3)

su - test1

then run


out put will be like this prompting for a vnc password..

You will require a password to access your desktops.


xauth:  file /home/test1/.Xauthority does not exist
New 'server1:1 (test1)' desktop is server1:1
Creating default startup script /home/test1/.vnc/xstartup
Starting applications specified in /home/test1/.vnc/xstartup
Log file is /home/test1/.vnc/server1:1.log

(5) Important : you will have to replace /home/test1/.vnc/xstartup content with below (Else you will not get the desktop, instead you will stuck with blank screen without user interfaces or menus )

vim /home/test1/.vnc/xstartup

and add

startxfce4 &

[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &

(6) startup script for the vncserver was created using "Further I will make the startup script for the vncserver like this" section of this tute

sudo vim /etc/init.d/vncserver

and add below content..


[ -f /etc/vncserver/vncservers.conf ] && . /etc/vncserver/vncservers.conf
prog=$"VNC server"
start() {
 . /lib/lsb/init-functions
 echo -n $"Starting $prog: "
 ulimit -S -c 0 >/dev/null 2>&1
 for display in ${VNCSERVERS}
 export USER="${display##*:}"
 if test -z "${REQ_USER}" -o "${REQ_USER}" == ${USER} ; then
 echo -n "${display} "
 su ${USER} -c "cd ~${USER} && [ -f .vnc/passwd ] && vncserver :${DISP} ${VNCUSERARGS}"
stop() {
 . /lib/lsb/init-functions
 echo -n $"Shutting down VNCServer: "
 for display in ${VNCSERVERS}
 export USER="${display##*:}"
 if test -z "${REQ_USER}" -o "${REQ_USER}" == ${USER} ; then
 echo -n "${display} "
 export USER="${display##*:}"
 su ${USER} -c "vncserver -kill :${display%%:*}" >/dev/null 2>&1
 echo -e "\n"
 echo "VNCServer Stopped"
case "$1" in
start $@
stop $@
stop $@
sleep 3
start $@
if [ -f /var/lock/subsys/vncserver ]; then
stop $@
sleep 3
start $@
status Xvnc
echo $"Usage: $0 {start|stop|restart|condrestart|status}"
exit 1

to make it an executable run the following..

chmod +x /etc/init.d/vncserver

(7) To make vnc desktop sessions allocated for users at start up automatically, create following script in /etc/vncserver

sudo mkdir -p /etc/vncserver
sudo vim /etc/vncserver/vncservers.conf

add this in vncservers.conf (this is because i have my users as test1, test2, test3 change it according to )

VNCSERVERS="3:test3 2:test2 1:test1"
VNCSERVERARGS[1]="-geometry 1024x768"
VNCSERVERARGS[2]="-geometry 1024x768"
VNCSERVERARGS[3]="-geometry 1024x768"

(8) Then run

sudo `update-rc.d vncserver defaults 99`

(9) reboot server (you are almost done by now) step 10 and the rest is how to login part

(10)download http://www.realvnc.com/download/viewer/

enter servername/ipaddress and session id for example my server is and if i use it will login to test2 user desktop.. and will login to test3 user desktop like wise

make sure encryption to be selected "Prefer off"



Then you can access your desktop and applications in this manner..


  • 2
    sudo update-rc.d vncserver defaults 99 insserv: warning: script 'vncserver' missing LSB tags and overrides – realtebo Jul 23 '16 at 17:02
  • how to change default ports? we're every day under attack ... – realtebo Aug 19 '16 at 7:44
  • @Aravinda, Thanks. Is it possible to set geometry settings by the user? For example user set the geometry in a file (say in .vnc folder,) then server read it from the file, instead of vncservers.conf. This way the user can set his/her preferences without needing sudo permissions. Thanks. – user153245 Jan 23 '18 at 13:14

Oh, btw, VNC can offer multiple independent sessions, it's just a pain to setup. You basically run multiple copies of Xvnc on different ports. The issue is that there is no automatic "bounce me to the next unused desktop" option, so you need to give each user that is going to be using the system remotely their own port.

  • Still could not deploy your suggestion.. I will be back and give feedback on this so that it can be helpful for some one.. – Aravinda Mar 6 '15 at 8:48
  • As an example, say you have three people who are going to login to the box remotely (user1, user2, user3) you could add the following lines to /etc/rc.local after creating the accounts with useradd: – Charles Tassell Mar 6 '15 at 12:36
  • Apparently you can't press enter in the comment box... Here's the full text: As an example, say you have three people who are going to login to the box remotely (user1, user2, user3) you could add the following lines to /etc/rc.local after creating the accounts with useradd: su -c "vncserver :1 user1" ; su -c "vncserver:2" user2 ; su -c "vncserver :3" user3 ; That creates 3 unique desktops on ports 5901, 5902 and 5903 – Charles Tassell Mar 6 '15 at 12:42
  • Everything seems to be fine.. I will update the thread when i have time with what i did exactly.. hopefully nextweek.. Thanks Charles for you advice.. – Aravinda Mar 28 '15 at 3:37
  • updated.. and marked it as the answer so that someone can see it easily – Aravinda Mar 31 '15 at 8:53

As an alternative to VNC, you might want to install XRDP which uses the Microsoft RDP protocol.

I've found it to be much easier to install and use, and the protocol is said to be much more efficient. However, it requires the use of Microsoft Remote Desktop client (available for Windows and Mac) or another Microsoft RDP compatible client.

This the link that was originally almost all in this answer:
http://c-nergy.be/blog/?p=5305 It's for LTS, but it should work with 14.10 as well.

However, I found it so useful, so I added some more info. Just in case the above link gets outdated, here's how to install in short:

Install XRDP

sudo apt-get install xrdp

Install the xfce4 Desktop environment

sudo apt-get install xfce4

Configure xrdp to use xfce desktop

echo xfce4-session >~/.xsession

Restart the xrdp service

sudo service xrdp restart

Now you can test your RDP connection. In your client machine, start remote Desktop client and enter the ip address/name of your ubuntu machine. You will be asked to login, and then you should see the Linux desktop.

  • a similar, yet more detailed answer may be found here – B.D. May 5 '20 at 10:39

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.