50

I'm using the Arduino IDE in Ubuntu, and am having issues with the serial port. It has worked in the past, but for reasons that may be unnecesary, I felt the need to change the ownership of some of the files from root ownership to my users ownership.

This made the IDE work correctly, but I lost the ability to use the correct serial port. In the dev folder, the port I need is listed as permission 166. Someone (who is no longer in the area to help me) swapped the permissions to 666, which made it all work gloriously.

However, it reverted back as soon as I restarted my computer, and if I now try to use the command:

sudo chmod 666 ttyACM0

nothing happens. No error messages, but no permission change either.

How can I change it, and how can I get it to change permanently.

I apologize if this question is overly simplistic or unclear, I'm an ubuntu noob, and I wouldn't begrudge feedback!

  • 1
    sudo chmod 666 /dev/ttyACM0 This was the only suggestion on this page that worked on my 14.04 beta2 live environment. Thanks! – user264842 Apr 3 '14 at 8:01
73

The issue with the permissions for /dev/ttyACM0 can be permanantly solved by adding yourself to the dialout group. You will have to logout and then log back in before the group change is recognized.

You can do this with sudo usermod -a -G dialout $USER

  • I learnt about this when Arduino IDE asked to give to root to add itself to the "Dailout group". Now I know what it is. – Ufoguy Dec 21 '13 at 18:02
  • I just purchased a Pulse-Eight USB - CEC Adapter for use with my new TV and found that it did not initially work with Kodi in Ubuntu. After checking the crash-log and googling the error message "ERROR: CecLogMessage - error opening serial port '/dev/ttyACM0': Permission denied", this page came up as a result. Thanks to you (and Don Kirkby, below - that works, too), I was able to rectify the problem immediately. – Rich.T. Apr 20 '16 at 5:37
  • Also, the answer from "user247020" gave me another solution: Open the GUI tool "Users and Groups" and make yourself an "Administrator". This will add you to the "dialout" group (ie. "Use Modems"), amongst others. – Rich.T. Apr 20 '16 at 5:52
  • usermod -a -G dialout pi works ok, after sudo chgrp dialout /dev/ttyS0 and work well but when i reboot all the config is lost. I'm on raspberry pi 3 – J261 Sep 14 '16 at 21:27
  • Add any command you need to redo to a startup script. So bash or /etc/profile or init. – Rinzwind Sep 15 '16 at 6:38
20

I couldn't get Rinzwind's suggestion to work, because it complained that the user account already exists. Instead, I used this command to add an existing user (terrik) to an existing group (dialout), as described on the Ubuntu Help Wiki.

sudo adduser terrik dialout

Also useful is this command for listing your current groups, although as Rinzwind says, you have to log out and log in before the serial port starts letting you in.

groups terrik
9

I couldn't get Terrik's answer working, but I could if I made this slight adjustment to the path for ttyACM0.

sudo chmod 666 /dev/ttyACM0

Would post as a comment but I don't have the privileges for that yet...

  • 1
    The permissions seem to reset when unplugging and replugging Arduino back in. – user1063287 Jan 9 '15 at 13:14
  • does not work. :( – Freddy Apr 10 '15 at 11:06
  • it works , well as well. but requires udev rule to re-permit on repplugging – pylover Sep 9 '15 at 9:59
  • I tried sudo chmod 666 /dev/ttyACM0 and it doesn't work when starting up again. Does anyone have a solution? – user1063287 Apr 21 '16 at 7:32
  • Hmm peepz this does work .... Add the command to a startup script. (/Dev gets recreated on boot so you need to redo this command each boot) – Rinzwind Sep 15 '16 at 6:36
7

Another possibility is to make a rules file in /etc/udev/rules.d/ directory. I had similar problem and I have created 50-myusb.rules file in the above directory with this content:

KERNEL=="ttyACM[0-9]*",MODE="0666"

Note that this will give any device connected to ttyACM socket read/write permissions. If you need only specific device to get read/write permissions you must also check idVendor and idProduct. You can find those by running lsusb command twice, once without your device connected and once when it is connected, then observe the additional line in the output. There you will see something like Bus 003 Device 005: ID ffff:0005. In this case idVendor = ffff and idProduct = 0005. Yours will be different. Than you modify the rules file to:

ACTION=="add", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="ffff", ATTRS{idProduct}=="0005", MODE="0666"

Now only this device gets the permissions. Read this to know more about writing udev rules.

2

Try going into System / Users and Groups and checkeing the box on your username in the TTY Group.

  • [Errno 13] Permission denied: '/dev/ttyACM0'. As well as tty group, user is also in dialout group. Linux Mint 17.1. – user1063287 Jan 9 '15 at 12:11
  • 1
    @user1063287 Try sudo chmod a+rw /dev/ttyACM0 – Vladimir S. Oct 1 '15 at 4:32

protected by Community Jan 19 '17 at 13:16

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.