How can I make crontab email me with the output of its jobs? I have MAILTO=redacted@yahoo.com.au above the jobs, but it doesn't work.

I know I need to use something like Postfix or Sendmail but for the life of me I cannot find out how to achieve this. I've searched and searched for a simple guide on setting up Postfix but they're all insanely complicated and expect you to be setting up a whole server to send and receive email and to know all the terms (like, what is a domain name for outgoing emails?).

All I want to do is have crontab email me. Why is this so difficult??

Additional Info:

My crontab file looks like this:

1 0 * * * ~/Desktop/toskymesh.sh
59 6 * * * ~/Desktop/tooptus.sh
0 3 * * * snapraid sync

More Additional Info:

The output of ps -ef | grep '[s]endmail'

root 6840 1370 0 10:26 ? 00:00:00 sendmail: MTA: accepting connections

I know for sure cron is working, but I'm testing the mail command with echo Test | mail -s Test redacted@yahoo.com.au anyway.


In the end I used sSMTP. It's far, far simpler than either Postfix or sendmail and does the job beautifully.

For future reference, here's how to use sSMTP with Yahoo Mail (don't worry, it's far less complex than it looks):

  • Use Synaptic to download ssmtp. Alternatively you could run sudo apt-get install ssmtp.

  • Open the config file at /etc/ssmtp/ssmtp.conf.

  • Make the config look like this:

  • Create the cert.pem file with OpenSSL. I used the command openssl req -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -days 9999 -nodes (more info at How to create a self-signed certificate with OpenSSL). You can stick the file anywhere, but I just chucked it in ~/. Wherever you put it, make sure you point the TLS_CA_File= line in ssmtp.conf to the correct location.

  • Open the file /etc/ssmtp/revaliases and add the line:


    If you're running as root, I would think you need to add another line replacing your name with 'root'.

  • That's it, you're good to go! To test, the easiest way (IMO) is to create a file with the following in it:

    To: [yourRealEmail@yahoo.com.au]
    From: "whateverYaWant" <[yourRealEmail@yahoo.com.au]>
    Subject: Some Notifying Email
    MIME-Version: 1.0
    Content-Type: text/plain
    Body of your email goes here! Hello world!
  • Save and close the file, then to check you don't have the real sendmail installed, run sendmail -V - it should say 'sSMTP'.

  • Finally, run cat fileWithEmailInIt.txt | sendmail -i -t, then wait a few seconds (10-30) and check your email!

Obviously, replace [yourRealEmail@yahoo.com.au] with your email (without the brackets) and [yourRealYahooPassword] with your Yahoo Mail password (again, without the brackets).

Additional note 1: If you have trouble with Gmail, try option 1 of this answer.
(Thanks to Ben Creasy!)

Additional note 2: If mail is sending from the command line but not through crontab, try changing FromLineOverride to NO in /etc/ssmtp/ssmtp.conf. You can also get more detailed logging by adding Debug=YES to ssmtp.conf - the extra logging goes to /var/log/mail.log.
(Thanks Jakub Kukul!)

  • What is the point of the .pem file? I see this tutorial doesn't include one: havetheknowhow.com/Configure-the-server/Install-ssmtp.html – Richard May 17 '16 at 12:21
  • @Richard If I remember correctly, Yahoo Mail refused to receive the email without it, but I'm not 100% sure. You could try it without it first, and if it doesn't work just add the certificate. – Clonkex May 18 '16 at 0:33
  • 2
    Thanks for the sSMTP suggestion.The Ubuntu Wiki has a helpful guide (but don't use an email address for hostname as currently shown). This answer suggests that you can use default server certificates, but I found I did not need a TLS_CA_File= line for sending via GMail. – Mark Berry May 11 '17 at 19:25
  • 2
    @MattM. Not deprecated, just not maintained. It should be totally fine to use sSMTP in a non-production environment :) – Clonkex May 21 '18 at 5:39
  • 1
    I had the same problem as @E.S. today - sending mail via commandline worked fine, but no mail was sent through crontab. I fixed it by changing FromLineOverride to NO in /etc/ssmtp/ssmtp.conf. During debugging, it was also helpful to add Debug=YES to ssmtp.conf - it resulted in more detailed information being logged to /var/log/mail.log. – Jakub Kukul Jul 19 '20 at 15:33

Install Postfix. It is more complicated than most other packages but it's still not complicated.

sudo apt-get install postfix

Select "Internet Site" and then accept all the defaults. Then we just need to stop outside connections, turning this into a "null client". Run: sudoedit /etc/postfix/main.cf and find the inet_interfaces setting (near the end) and change it to loopback-only, like so:

inet_interfaces = loopback-only

And finally restart Postfix with sudo /etc/init.d/postfix restart (reloading won't do).

You now have a Postfix install that won't relay email for outside machines, it'll just accept connections on (and ::1 for IPv6).

On a separate note, your cron lines are probably not working because you're using non-relative paths and paths with Bash substitutions in. sh doesn't understand ~ and it might not have a proper PATH set. So replace them with (I'm just guessing at the actual paths):

1 0 * * *   /home/clonkex/Desktop/toskymesh.sh
59 6 * * *  /home/clonkex/Desktop/tooptus.sh
0 3 * * *   /usr/bin/snapraid sync

And if your scripts require to be run from a specific directory, make sure they cd into the right directory. Don't assume that cron will be in the right place as it likely won't.

  • 1
    Thanks, but Postfix is complicated, if only because there seem to be no simple guides whatsoever. Anyway, I got it working just fine with sSMTP which does exactly what I need and is genuinely simple (although it still took a lot of fiddling and random guessing to get it to actually work). I meant to post an answer but forgot - I actually managed to destroy my OS installation so as soon as I've got it going again fully I'll post my own answer :) – Clonkex Oct 14 '14 at 8:25
  • And actually my cron jobs worked just fine with ~/Desktop/. – Clonkex Oct 14 '14 at 8:31
  • 2
    I needed inet_interfaces = localhost. loopback-only gave me postfix: fatal: config variable inet_interfaces: host not found: loopback-only – craq Jun 28 '17 at 8:50

I had very good luck with exim4.

sudo apt-get install alpine exim4 mailutils eximon4 spf-tools-perl swaks

(alpine is just the mail client I like using)

After that, I ran

sudo dpkg-reconfigure exim4-config

and followed through the prompts. This page: https://help.ubuntu.com/community/Exim4 was very helpful as well. It took me about 10 minutes to get it running.


From sSMTP manpage: "It does not do aliasing, which must be done either in the user agent or on the mailhub. Nor does it honor .forwards, which have to be done on the recieving host. It especially does not deliver to pipelines."

So, if you want to receive all msgs sent to root on your extenal email, it's a bad idea to use sSMTP, because it does not support aliases.

Instead, you could user postfix. It's still very simple. Here's how to use it with gmail as your smtp for sending messages:

sudo apt-get install postfix mailutils

General type of mail configuration: Satellite system

System mail name: The preferred fully-qualified name of the mail server, e.g., mail.example.com

SMTP relay host (blank for none): [smtp.gmail.com]:587

Add to /etc/postfix/main.cf:

smtp_use_tls = yes
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl/sasl_passwd
smtp_sasl_security_options = noanonymous
smtp_sasl_tls_security_options = noanonymous

Create /etc/postfix/sasl/sasl_passwd

[smtp.gmail.com]:587 emailtouseforsending@gmail.com:password


sudo postmap /etc/postfix/sasl/sasl_passwd
sudo chown -R root:postfix /etc/postfix/sasl
sudo chmod 750 /etc/postfix/sasl
sudo chmod 640 /etc/postfix/sasl/sasl_passwd*

Edit /etc/aliases and add:

root: email@example.com

Lastly, run:

sudo newaliases
sudo systemctl stop postfix.service
sudo systemctl start postfix.service

Now, you can test if redirecting is working:

echo "Test to root." | mail -s "Test message to root" root

Hope it helps.


I used a pretty simple method to get cron to send emails: Backup Linux configuration, scripts and documents to Gmail.

Simplest way to automate sending email

From Send email alerts using ssmtp we find the simplest way of sending email automated from terminal or script. The installation steps are straight forward:

sudo apt install ssmtp
sudo nano /etc/ssmtp/ssmtp.conf
# Change "MyEmailAddress" and "MyPassword" to your own.

There is one step not mentioned; Google will send you an email confirming you want to allow a "less secure" application to send mail with your account:

gmail turns on less secure apps for email

There is an annoyance of getting too much mail. For example every time you mistype your sudo password you will get an email: Stop emailing me bad sudo password attempts


In case you don't want email notifications, but want to log cron jobs' output somewhere to be able to inspect it if need be:

# apt install postfix

Select "Local only" when asked for a mail server configuration type.

To confirm that cron will be able to send mail:

# apt install mailutils
# echo test body | mail -s 'test subject' root
# cat /var/mail/root

Alternatively add a cron job:

* * * * * date

Wait for it to run (journalctl -ef or watch date), then cat /var/mail/root.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.