81

I would like to use a software to control which program may connect to the internet. I know that this behaviour is associated with the word "firewall", but some Linux users are very upset if somebody demands a Personal Firewall. I don't want to upset you by demand such a program.
I don't want to "secure ports" or other stuff a Personal Firewall promises on Windows. I looked into iptables but it does not fit my requirements.

I saw an excellent answer here ("How to block internet access for wine applications") but it's very uncomfortable to set this up.

Is there a software that asks for each program if it may access the internet?

1
  • on mac there is a software called little snitch that does this. I think there is a windows version also...
    – Alvar
    May 25, 2011 at 13:47

12 Answers 12

40

I found a convenient solution that solves the problem. You create a group that is never allowed to use the internet and start the program as a member of this group.

  1. Create a group no-internet. Do not join this group

    sudo addgroup no-internet
    
  2. Add a rule to iptables that prevents all processes belonging to the group no-internet from using the network (use ip6tables to also prevent IPv6 traffic)

    sudo iptables -A OUTPUT -m owner --gid-owner no-internet -j DROP
    
  3. Execute sudo -g no-internet YOURCOMMAND instead of YOURCOMMAND.

You can easily write a wrapper script that uses sudo for you. You can get rid of the password prompt by adding

%sudo     ALL=(:no-internet)      NOPASSWD: ALL

or, something similar with sudo visudo

Use the iptables-save and iptables-restore to persist firewall rules.

13
  • 1
    I tried your guide, sudo -g no-internet firefox connects faster than default one. It doesn't work.
    – kenn
    Apr 14, 2014 at 12:22
  • 2
    @kenn I can only say that it works fine here. I would guess that you are doing something wrong when creating the rule. Not saving the rule, not making the script executable or something like that.
    – Tim
    Apr 14, 2014 at 13:53
  • I rebooted and applied above rules again with no luck
    – kenn
    Apr 14, 2014 at 14:32
  • 2
    worked perfectly for me, even with firefox. thank you!
    – Kostanos
    Aug 8, 2018 at 23:09
  • 2
    This doesn't seem to work for me either, on Ubuntu 19.04. I did have to install iptables-persistent in order to allow the changes to be saved between reboots. (So you might want to add that to the solution above). However, sudo -g no-internet firefox does not restrict Firefox from accessing internet. Conceptually, this solution seems like it should work. Is there something fundamental that is being overlooked? For example do we need to setup BOTH ipv4 and ipv6 to make this work?
    – Enterprise
    May 10, 2019 at 19:33
38

NOTE: Douane is no longer actively developed and is reported to not work in later Ubuntu versions. This solution may not work, but the answer is kept as is for historical reasons.

In case you're still looking for this kind of application, I am currently developing exactly that application: http://douaneapp.com/ https://gitlab.com/douaneapp/Douane

My application blocks any unknown applications (new versions of an authorized application are blocked) and asks you if you Allow or Deny its traffic.

Have a look at the website ;-)

screen shot

18
  • Cool! I looked also at ppa but no package there despite application is created there. Also I wonder if it could show the ip resolved to a readable site name? And, I am going to follow the compilation instructions, I saw many tips for ubuntu dep packages there, and I will use checkinstall to create my local copy of .deb packages to easily manage upgrades (remove/install). May be checkinstall could be used to create your distributables too I think. Oct 8, 2014 at 4:47
  • You can open feature request on Github (github.com/Douane/Douane/issues) :)
    – ZedTuX
    Oct 8, 2014 at 9:50
  • 2
    uh, it seems exactly what I needed!! But I can't find a package to install it on Ubuntu.
    – azerafati
    Mar 14, 2016 at 14:06
  • 1
    Douaneapp.com is back ! :)
    – ZedTuX
    Feb 4, 2019 at 19:17
  • 1
    Hey @darksoulsong, I'm still working on it, but with a very little amount of time, unfortunately. Join us on gitter.im/Douane/… in order to get the most up-to-date info!
    – ZedTuX
    Jun 15, 2020 at 8:54
16

Another option is firejail. It runs the application inside sandbox where you control if the application could see the network:

firejail --net=none firefox

This command will start Firefox browser without internet access. Note that the firejail distribution in the Ubuntu repo is outdated - better download its latest LTS version from the firejail home page.

1
  • 1
    Very lightweight and very useful. Thanks for sharing! Apr 6, 2020 at 13:48
6

There is a Perl script in the German Ubuntu forum (Google-translated to English) that seems to do that. I never tried it and I didn't take a closer look at the script, but maybe it works for you. The description is in German only so you may need a translation service (like Google Translate; see above).

1
  • I will have a look at it. It's interesting an may be the right tool. Unfortunately, there's no gui, but it shouldn't stop me :)
    – guerda
    May 25, 2011 at 11:13
6

Running a program under another user will use the config files for that user and not yours.

Here is a solution that does not require modifying the firewall rules, and runs under the same user (via sudo) with a modified environment, where your user is my_user and the app you want to run is my_app:

# run app without access to internet
sudo unshare -n sudo -u my_user my_app

For more details see man unshare and this answer.

Linux GUI firewall

If you are looking for a GUI firewall I've had good results with OpenSnitch — it's not yet in ubuntu repos and I wouldn't call it production-level, but following the build steps from the github page worked for me.

5

There is already a firewall in Ubuntu, ufw, but it is disabled by default. You can enable and use it by the command line or its frontend, gufw, that is installable directly from the Ubuntu Software Centre.

If you need to block the internet access to a specific application, you can try LeopardFlower, which is still in beta version and it is not available in the Ubuntu Software Centre:

3

I have found the solution posted here to be a good one. It involves creating a user-group for which internet access is allowed, and setting up firewall rules to allow access only for this group. The only way for an application to access the internet is if it is run by a member of this group. You can run programs under this group by opening a shell with sudo -g internet -s.

To recap what's in the post I linked above:

  1. Create the "internet" group by typing the following into a shell: sudo groupadd internet

  2. Ensure that the user who will run the script below is added to the sudo group in /etc/group. If you end up modifying this file, then you will need to log out and back in before the script below will work.

  3. Create a script containing the following, and run it:

    #!/bin/sh
    # Firewall apps - only allow apps run from "internet" group to run
    
    # clear previous rules
    sudo iptables -F
    
    # accept packets for internet group
    sudo iptables -A OUTPUT -p tcp -m owner --gid-owner internet -j ACCEPT
    
    # also allow local connections
    sudo iptables -A OUTPUT -p tcp -d 127.0.0.1 -j ACCEPT
    sudo iptables -A OUTPUT -p tcp -d 192.168.0.1/24 -j ACCEPT
    
    # reject packets for other users
    sudo iptables -A OUTPUT -p tcp -j REJECT
    
    # open a shell with internet access
    sudo -g internet -s
    
  4. By running the above script, you will have a shell in which you can run applications with internet access.

Note that this script doesn't do anything to save and restore your firewall rules. You may wish to modify the script to use the iptables-save and iptables-restore shell commands.

3

@psusi: I really wish people wouldn't peddle bad and not useful information. IPTables allows one to do this, so I'd hardly consider it "foolhardy". Just saying "NO" without understanding a use case is somewhat narrow minded. http://www.debian-administration.org/article/120/Application_level_firewalling

EDIT bodhi.zazen

NOTE - THIS OPTION WAS REMOVED FROM IPTABLES IN 2005, 8 YEARS BEFORE THIS ANSWER WAS POSTED

SEE - http://www.spinics.net/lists/netfilter/msg49716.html

commit 34b4a4a624bafe089107966a6c56d2a1aca026d4 Author: Christoph Hellwig Date: Sun Aug 14 17:33:59 2005 -0700

[NETFILTER]: Remove tasklist_lock abuse in ipt{,6}owner

Rip out cmd/sid/pid matching since its unfixable broken and stands in the way of locking changes to tasklist_lock.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Patrick McHardy <kaber@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
5
  • 2
    To anyone considering flagging this: This should not be a comment instead, it answers the question that was asked. @user141987 I do recommend expanding this to provide more information about how to set up iptables to implement per-application restrictions, however. I recommend including the important information in your answer (and still providing the link, for reference). Mar 20, 2013 at 13:50
  • 2
    iptables does NOT filter by application.
    – Panther
    Mar 20, 2013 at 16:58
  • That article appears to be misinformation since there is no such option. The reason why requests to create such an option in the past were rejected is because it would be inherently unreliable; an application can simply change its name.
    – psusi
    Mar 21, 2013 at 13:24
  • 3
    @psusi Are you saying "If your kernel was compiled with CONFIG_IP_NF_MATCH_OWNER then you can configure your iptables firewall to allow or reject packets on a per-command basis" is incorrect? Or simply that most kernels don't include the option? If this is incorrect, are there sources of information that debunk it? (Also, please note that the primary purpose of per-application firewall restrictions is not to try to make it perfectly safe to run untrusted applications. The purpose is primarily to give the user a measure of control beyond applications' built-in configuration options.) Mar 21, 2013 at 17:27
  • This option was removed from the kernel in 2005, 8 years before this answer was given - spinics.net/lists/netfilter/msg49716.html and despite claims to the contrary is inaccurate, you can NOT application filter with iptables.
    – Panther
    Jul 20, 2017 at 22:49
1

For better or worse, Linux uses a different approach. There is no simple graphical interface to offer this functionality. There are many discussions on this topic on the internet and you can find interesting discussions if you google search. While debate is interesting, to date there has not been a dedicated group of programmers wanting to write and maintain this functionality.

The tools that offer this functionality in Linux are Apparmor, Selinux, and Tomoyo.

None of these tools are overly easy to learn and all have advantages and disadvantages. Personally I prefer SELinux, although SELinux has a steeper learning curve.

See:

http://www.linuxbsdos.com/2011/12/06/3-application-level-firewalls-for-linux-distributions/

There was (is) an application that has been referenced already, leopardflower. I am not sure of the status / maintance.

1

It was in iptables up to kernel version 2.6.24 If you are running a 2.x - 2.6.24 machine and your kernel has it complied in you can do it. for some reason they took it out, so no its not microsoft. http://cateee.net/lkddb/web-lkddb/IP_NF_MATCH_OWNER.html

1
1

Try Leopard Flower. It has a GUI and per-application restrictions.

-1

No, it isn't possible. It also isn't part of the traditional definition of a firewall. It is something that Microsoft came up with fairly recently in an attempt to paper around their fundamentally broken OS security problems. It is considered foolhardy and unworkable in the Linux community because one program that isn't allowed can simply run another program that is and gain access that way.

If you don't like what a program is doing on the network when you run it, then don't run that program.

4
  • 9
    Microsoft's firewall was not the first major firewall to offer this functionality. It wasn't even the first Windows firewall to offer it. BlackIce Defender, ZoneAlarm, and a variety of other software firewalls for Windows predate the introduction of the Windows Internet Connection Firewall by years. Furthermore, there is no such consensus in the Linux community. We often use AppArmor (or SELinux) to constrain the behavior of applications (and I wonder if AppArmor could be adapted to this purpose...). There's no reason it's "wrong" to want to control what apps can access the Internet. Mar 20, 2013 at 13:40
  • And, as several other answers can attest, per-application firewall restrictions are quite possible; this functionality is built into iptables/netfilter! Mar 20, 2013 at 13:46
  • No, neither netfilter nor iptables can filter per application. They can filter by user and port but not per application.
    – Panther
    Mar 20, 2013 at 16:56
  • "Can simply run another"???? Then obviously the creator of such a program that doesn't block the child processes of the target program is vastly flawed.
    – trusktr
    Aug 3, 2013 at 6:16

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .