I am running Ubuntu for the first time by booting from a USB drive. Now I have plugged in a USB-to-serial converter which has been recognized and automatically added as /dev/ttyUSB0.

How do I access /dev/ttyUSB0?


11 Answers 11


Use one of screen's lesser known features:

screen /dev/ttyUSB0
  • 29
    if you need to specify the baud rate, add it after the serial device. eg, for 57600 baud: screen /dev/ttyUSB0 57600 – Jeremy Kerr Mar 13 '12 at 12:45
  • 13
    Note that if you want to detach from the terminal and CTRL-D isn't cutting it, use CTRL-A then k to kill screen. I had to use this with the TTY at ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/tty provided by Docker for Mac. CTRL-A then d will work too, but will leave your screen session running, which may or may not be what you want. – Vanessa Phipps Nov 17 '16 at 17:14
busybox microcom -t 5000 /dev/ttyUSB0

Source: http://forum.xda-developers.com/showthread.php?t=1471241


You could use tio - a simple tty terminal I/O application:

tio /dev/ttyUSB0

See http://tio.github.io


you can use ckermit also. It should be in the repository. After installing it create a file in your home directory called .mykermrc then add the 5 following lines:

set line /dev/ttyUSB0   
set flow-control none  
set carrier-watch off  
set speed 115200  

parameters can be adjusted as necessary.
save the file.
to start it

sudo kermit 

You can use putty. Its an ssh/serial/telnet client for Windows and Linux. You can download it from http://linux.softpedia.com/get/System/Networking/PuTTY-347.shtml


You can use picocom, it is a minimal dumb-terminal emulation program. Basic usage is something like this (change 11520 to the desired baud rate):

$ picocom -b 115200 /dev/ttyUSB0

You have all the options you may want from a dumb-terminal program, like stop bits, parity, local echo, carriage return / line feed / backspace / delete / tab translation, X/Y/Z-modem and ASCII transfer integration, etc.

See man picocom and picocom --help for further information.


Needed Mint 17.1 to talk to my Arduino, after a little chasing around, it turns out that your user must be part of the dialout group to use the tty. This should apply to Ubuntu as well. You can do so either by running the command:

sudo usermod -a -G dialout username

Or graphically, by using:

Administration → Users & Groups → Manage Groups

In which case you would go to the line for dialout, check the properties to ensure that username is ticked, if not username must be added.

This worked for me and by the look of lots of posts others have had the same problem.

  • 17
    -1 for sudo gedit /etc/group. Don't. Just don't. Learn how to add a user to a group using usermod or adduser for example. And your post is more of a comment rather than an answer to the question, because you don't actually show how to connect. – gertvdijk Dec 24 '14 at 14:36

I was using puTTY to connect to the serial ports. But don't forget to add your user to dialout: sudo adduser <username> dialout then reboot the system.

After that, you can use puTTY for serial connections such as /dev/ttyUSB0.

  • 4
    it is actually enough to simply log out and back in again. – Azsgy Jul 24 '15 at 19:04


minicom -D /dev/ttyUSB0

If you need to configure it first, then

minicom -s

If you're wondering where's the meta key in MacOS, you will need to plan an escape. For other options, -h for help.


Using Lucid and a Dynamode USB to RS232 cable:

Plugged it in
ran kermit
set line /dev/ttyUSB0    <<-- mind the capitals/lowecase
set speed 9600

and successfully connected to an RS232 port on an OpenVMS server.


Tio without GUI or CuteCom with GUI.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.