1

I have tried this solution and it doesnt work.
sudo fdisk -l output is

Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0004a414

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      718847      358400    7  HPFS/NTFS/exFAT
/dev/sda2          718848   759897456   379589304+   7  HPFS/NTFS/exFAT
/dev/sda3       759898110  1465147391   352624641    5  Extended
Partition 3 does not start on physical sector boundary.
/dev/sda5      1448615936  1465147391     8265728   82  Linux swap / Solaris
/dev/sda6       759898112  1448615935   344358912   83  Linux

Partition table entries are not in disk order

Disk /dev/sdb: 3960 MB, 3960471552 bytes
31 heads, 30 sectors/track, 8317 cylinders, total 7735296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            8192     7735295     3863552    b  W95 FAT32

When apply
sudo mount --options remount,rw /dev/sdb1
says: mount: cannot remount block device /dev/sdb1 read-write, is write-protected
When apply this: sudo chown -hR waqas /dev/sdb1
it shows changing the permission of files and gives the log files but result is nothing when i goto the card and check the permission its the same.
same case with the sudo chmod -R 777 /dev/sdb1
and the last one i apply gksudo nautilus when navigate to the card and try to change the permission it says: enter image description here and window close after a second. So I am not sure what to do.

Note:
Ubuntu 13.10
this card was in Android phone and somehow got messed up with the permissions.
written on card: Micro SD card HC 4GB

  • Can you write to it in any other device? – Ken Sharp Dec 5 '15 at 0:03
-1

I just came across the same problem. The reason for the error message is that there is physical switch that prevents a write to the media. You SD adapters have one. But micro sd doesnt.

Solution: (Obvious :P) Flip the switch in the SD card adapter and plug it in.

  • micro card doesnt have switch on it where it is IMAGE ? – Waqas Jan 26 '14 at 13:13
  • Micro SD card doesnt have any physical switches. But an adapter for it is having one. cheapchips.com.au/resources/image/… In the left side you can see a small plastic movable thing. What did you mean @RanaMuhammadWaqas ? – Jay Aurabind Jan 27 '14 at 5:06
  • I have that unlocked and it doesnt work either a way changed the adapter jacket even i thought you telling me there is a lock on micro sd card – Waqas Jan 27 '14 at 14:16
  • In that case, I am out of option, sorry. Sometimes your adapter itself is damaged. Or perhaps when you plug it in, the switch automatically changes the state (mechanically) due to some congestion. I cant think of anything else. – Jay Aurabind Jan 28 '14 at 10:49

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.