21

I am not asking how to boot the LiveCD from a USB.

I have 2 Ubuntu installations, one on my computer's internal hard drive and another on a USB drive.

Is there a way to add a GRUB2 menu entry (to the GRUB on my internal hard drive) to boot the Ubuntu OS which I have installed to the USB flash drive and have this same menu entry still work after I've upgraded the Linux kernel on the USB installation?

29

Each time you upgrade kernel on external, you can run this to update boot stanza in grub on the internal drive.

sudo update-grub

But you can also add a boot stanza to grub2's 40_custom that boots the partition, not the specific kernel. Ubuntu installs links in / (root) to boot the most recent install. Adjust example below if necessary to your drive & partition. Boot drive with grub is always hd0, but then other drives are in BIOS reported order which may vary.

Edit with:

gksudo gedit /etc/grub.d/40_custom

then, add:

menuentry "Install on sdb1" {
    set root=(hd1,1)
    linux /vmlinuz root=/dev/sdb1 ro quiet splash
    initrd /initrd.img
}

While above works, I find the drive may change when plugging in a flash drive or any other USB device. So I am converting to use labels.

menuentry "Cosmic 18.10 on sdb12 test" {
    search --set=root --label cosmic_b --hint hd2,gpt12
    configfile /boot/grub/grub.cfg 
}
  • 1
    Is there a way to use the partition's UUID rather than /dev/sdb1? – kiri Sep 12 '13 at 10:40
  • sudo update-grub worked great, thanks! – Sergiy Migdalskiy Sep 11 '14 at 21:55
  • 1
    how should you figure what should be in place of (hd1,1)? where do you take these numbers from so that they fit? I may need this for setting straight a different problem: askubuntu.com/questions/573502/… – matt Jan 13 '15 at 23:53
  • 3
    The first number is the drive as reported by BIOS. But boot drive is always hd0, so drive order can change. Then second number is partition number. Where sda3 is hd0,3 if you boot from the drive that is sda. But if you boot from sdb, then it may be hd1,3. Sometimes you just have to experiment. – oldfred Jan 14 '15 at 0:19
  • sudo update-grub works with adding windows entries as well – superl2 Feb 26 '15 at 3:08
7

I found out how to use the UUID of the drive, useful if you have multiple drives plugged in at boot time. Credits to oldfred for his note about /vmlinux and /initrd.img symlinks.

Add this to the file /etc/grub.d/40_custom, replacing UUID=XXXX-YYYY with the partition UUID (get UUID with command blkid)

menuentry "Boot from USB Drive" {
    set root=UUID=XXXX-YYYY
    linux /vmlinuz root=UUID=XXXX-YYYY ro quiet splash
    initrd /initrd.img
}
  • 8
    This is definitely not the answer to the question above. You should have accepted oldfred's reply. – Demis Palma ツ Sep 8 '15 at 21:21
  • 1
    @kiri: It is considered bad practice to copy someone else's answer and give yourself credit for it. Yes, even if you added the UUID part. – Lennart Rolland Jul 8 '18 at 22:12

Your Answer

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service, privacy policy and cookie policy, and that your continued use of the website is subject to these policies.

Not the answer you're looking for? Browse other questions tagged or ask your own question.