2

It had been months since I had booted my Ubuntu partition so I fired it up yesterday evening and immediately ran a "sudo apt-get update && sudo apt-get upgrade". The update apparently finished without issue and asked me to reboot. As I had some other business to do I shut the laptop down and booted on Windows instead for the rest of the night. Today I rebooted on Ubuntu to find out that the WiFi adapter won't connect to my box anymore.

I can see the list of the available wifi networks and the adapter keeps trying to connect to my box but each time I see the spinner icon spin for a while and it ends with a "Wireless network Disconnected" toast notification.

Thanks a lot for your help, Thomas

Here are the results from a few commands, please ask if you need me to run anything else:

$ lspci -vvnn | grep Network

03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008a] (rev 34)

$ lspci -vvnn (relevant excerpt)

03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008a] (rev 34)
    Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN [8086:5325]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi

excerpt from syslog showing about 2 full consecutive attempts at connecting

Jul 29 18:12:37 qwindoo NetworkManager[923]:  Auto-activating connection 'Livebox-7435'.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) starting connection 'Livebox-7435'
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0/wireless): access point 'Livebox-7435' has security, but secrets are required.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0/wireless): connection 'Livebox-7435' has security, and secrets exist.  No new secrets needed.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Config: added 'ssid' value 'Livebox-7435'
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Config: added 'scan_ssid' value '1'
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Config: added 'key_mgmt' value 'WPA-PSK'
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Config: added 'psk' value ''
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Config: set interface ap_scan to 1
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: disconnected -> scanning
Jul 29 18:12:37 qwindoo wpa_supplicant[1261]: Trying to authenticate with 5c:33:8e:8e:33:66 (SSID='Livebox-7435' freq=2437 MHz)
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: scanning -> authenticating
Jul 29 18:12:37 qwindoo kernel: [ 1787.825723] wlan0: authenticate with 5c:33:8e:8e:33:66 (try 1)
Jul 29 18:12:37 qwindoo wpa_supplicant[1261]: Trying to associate with 5c:33:8e:8e:33:66 (SSID='Livebox-7435' freq=2437 MHz)
Jul 29 18:12:37 qwindoo kernel: [ 1787.828775] wlan0: authenticated
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: authenticating -> associating
Jul 29 18:12:37 qwindoo kernel: [ 1787.836444] wlan0: associate with 5c:33:8e:8e:33:66 (try 1)
Jul 29 18:12:37 qwindoo kernel: [ 1787.840676] wlan0: RX ReassocResp from 5c:33:8e:8e:33:66 (capab=0x431 status=0 aid=2)
Jul 29 18:12:37 qwindoo kernel: [ 1787.840686] wlan0: associated
Jul 29 18:12:37 qwindoo wpa_supplicant[1261]: Associated with 5c:33:8e:8e:33:66
Jul 29 18:12:37 qwindoo kernel: [ 1787.845878] cfg80211: Calling CRDA for country: FR
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: associating -> 4-way handshake
Jul 29 18:12:37 qwindoo kernel: [ 1787.854158] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854169] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854175] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854181] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854186] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854191] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854196] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854202] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854206] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854212] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854217] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854223] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854227] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854233] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854237] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854243] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854247] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854253] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854258] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854263] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854268] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854273] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854278] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854284] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854288] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:12:37 qwindoo kernel: [ 1787.854294] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854301] cfg80211: Regulatory domain changed to country: FR
Jul 29 18:12:37 qwindoo kernel: [ 1787.854305] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854311] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854316] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854320] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:12:37 qwindoo kernel: [ 1787.854325] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jul 29 18:12:37 qwindoo wpa_supplicant[1261]: WPA: Key negotiation completed with 5c:33:8e:8e:33:66 [PTK=CCMP GTK=TKIP]
Jul 29 18:12:37 qwindoo wpa_supplicant[1261]: CTRL-EVENT-CONNECTED - Connection to 5c:33:8e:8e:33:66 completed (reauth) [id=0 id_str=]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: 4-way handshake -> completed
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Livebox-7435'.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jul 29 18:12:37 qwindoo NetworkManager[923]:  dhclient started with pid 5199
Jul 29 18:12:37 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jul 29 18:12:37 qwindoo dhclient: Internet Systems Consortium DHCP Client 4.1-ESV-R4
Jul 29 18:12:37 qwindoo dhclient: Copyright 2004-2011 Internet Systems Consortium.
Jul 29 18:12:37 qwindoo dhclient: All rights reserved.
Jul 29 18:12:37 qwindoo dhclient: For info, please visit https://www.isc.org/software/dhcp/
Jul 29 18:12:37 qwindoo dhclient: 
Jul 29 18:12:37 qwindoo NetworkManager[923]:  (wlan0): DHCPv4 state changed nbi -> preinit
Jul 29 18:12:37 qwindoo dhclient: Listening on LPF/wlan0/ac:72:89:45:2e:fa
Jul 29 18:12:37 qwindoo dhclient: Sending on   LPF/wlan0/ac:72:89:45:2e:fa
Jul 29 18:12:37 qwindoo dhclient: Sending on   Socket/fallback
Jul 29 18:12:37 qwindoo dhclient: DHCPREQUEST of 192.168.1.12 on wlan0 to 255.255.255.255 port 67
Jul 29 18:12:47  dhclient: last message repeated 2 times
Jul 29 18:12:47 qwindoo kernel: [ 1798.016842] wlan0: no IPv6 routers present
Jul 29 18:12:57 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Jul 29 18:13:00 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
Jul 29 18:13:05 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
Jul 29 18:13:14 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): DHCPv4 request timed out.
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): canceled DHCP transaction, DHCP client pid 5199
Jul 29 18:13:23 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
Jul 29 18:13:23 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) started...
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Jul 29 18:13:23 qwindoo NetworkManager[923]:  Activation (wlan0) failed for access point (Livebox-7435)
Jul 29 18:13:23 qwindoo NetworkManager[923]:  Activation (wlan0) failed.
Jul 29 18:13:23 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) complete.
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): deactivating device (reason 'none') [0]
Jul 29 18:13:23 qwindoo kernel: [ 1833.474562] wlan0: deauthenticating from 5c:33:8e:8e:33:66 by local choice (reason=3)
Jul 29 18:13:23 qwindoo wpa_supplicant[1261]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
Jul 29 18:13:23 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: completed -> disconnected
Jul 29 18:13:23 qwindoo kernel: [ 1833.678195] cfg80211: All devices are disconnected, going to restore regulatory settings
Jul 29 18:13:23 qwindoo kernel: [ 1833.678211] cfg80211: Restoring regulatory settings
Jul 29 18:13:23 qwindoo kernel: [ 1833.678222] cfg80211: Calling CRDA to update world regulatory domain
Jul 29 18:13:23 qwindoo kernel: [ 1833.688505] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
Jul 29 18:13:23 qwindoo kernel: [ 1833.688518] cfg80211: World regulatory domain updated:
Jul 29 18:13:23 qwindoo kernel: [ 1833.688524] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 29 18:13:23 qwindoo kernel: [ 1833.688533] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:13:23 qwindoo kernel: [ 1833.688542] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:13:23 qwindoo kernel: [ 1833.688550] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:13:23 qwindoo kernel: [ 1833.688558] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:13:23 qwindoo kernel: [ 1833.688565] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Auto-activating connection 'Livebox-7435'.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) starting connection 'Livebox-7435'
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0/wireless): access point 'Livebox-7435' has security, but secrets are required.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0/wireless): connection 'Livebox-7435' has security, and secrets exist.  No new secrets needed.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Config: added 'ssid' value 'Livebox-7435'
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Config: added 'scan_ssid' value '1'
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Config: added 'key_mgmt' value 'WPA-PSK'
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Config: added 'psk' value ''
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Config: set interface ap_scan to 1
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: disconnected -> scanning
Jul 29 18:13:26 qwindoo wpa_supplicant[1261]: Trying to authenticate with 5c:33:8e:8e:33:66 (SSID='Livebox-7435' freq=2437 MHz)
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: scanning -> authenticating
Jul 29 18:13:26 qwindoo kernel: [ 1836.800674] wlan0: authenticate with 5c:33:8e:8e:33:66 (try 1)
Jul 29 18:13:26 qwindoo wpa_supplicant[1261]: Trying to associate with 5c:33:8e:8e:33:66 (SSID='Livebox-7435' freq=2437 MHz)
Jul 29 18:13:26 qwindoo kernel: [ 1836.803209] wlan0: authenticated
Jul 29 18:13:26 qwindoo kernel: [ 1836.803435] wlan0: associate with 5c:33:8e:8e:33:66 (try 1)
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: authenticating -> associating
Jul 29 18:13:26 qwindoo kernel: [ 1836.807446] wlan0: RX ReassocResp from 5c:33:8e:8e:33:66 (capab=0x431 status=0 aid=2)
Jul 29 18:13:26 qwindoo kernel: [ 1836.807449] wlan0: associated
Jul 29 18:13:26 qwindoo wpa_supplicant[1261]: Associated with 5c:33:8e:8e:33:66
Jul 29 18:13:26 qwindoo kernel: [ 1836.810872] cfg80211: Calling CRDA for country: FR
Jul 29 18:13:26 qwindoo kernel: [ 1836.814041] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814045] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814047] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814050] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814051] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814053] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814055] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814057] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814059] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814061] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814063] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814065] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814066] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814068] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814070] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814072] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814074] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814076] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814078] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814080] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814081] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814083] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814085] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814087] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814089] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
Jul 29 18:13:26 qwindoo kernel: [ 1836.814091] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814094] cfg80211: Regulatory domain changed to country: FR
Jul 29 18:13:26 qwindoo kernel: [ 1836.814095] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814097] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814099] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814101] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 29 18:13:26 qwindoo kernel: [ 1836.814103] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: associating -> associated
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: associated -> 4-way handshake
Jul 29 18:13:26 qwindoo wpa_supplicant[1261]: WPA: Key negotiation completed with 5c:33:8e:8e:33:66 [PTK=CCMP GTK=TKIP]
Jul 29 18:13:26 qwindoo wpa_supplicant[1261]: CTRL-EVENT-CONNECTED - Connection to 5c:33:8e:8e:33:66 completed (reauth) [id=0 id_str=]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: 4-way handshake -> completed
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Livebox-7435'.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jul 29 18:13:26 qwindoo NetworkManager[923]:  dhclient started with pid 5212
Jul 29 18:13:26 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Jul 29 18:13:26 qwindoo dhclient: Internet Systems Consortium DHCP Client 4.1-ESV-R4
Jul 29 18:13:26 qwindoo dhclient: Copyright 2004-2011 Internet Systems Consortium.
Jul 29 18:13:26 qwindoo dhclient: All rights reserved.
Jul 29 18:13:26 qwindoo dhclient: For info, please visit https://www.isc.org/software/dhcp/
Jul 29 18:13:26 qwindoo dhclient: 
Jul 29 18:13:26 qwindoo NetworkManager[923]:  (wlan0): DHCPv4 state changed nbi -> preinit
Jul 29 18:13:26 qwindoo dhclient: Listening on LPF/wlan0/ac:72:89:45:2e:fa
Jul 29 18:13:26 qwindoo dhclient: Sending on   LPF/wlan0/ac:72:89:45:2e:fa
Jul 29 18:13:26 qwindoo dhclient: Sending on   Socket/fallback
Jul 29 18:13:26 qwindoo dhclient: DHCPREQUEST of 192.168.1.12 on wlan0 to 255.255.255.255 port 67
Jul 29 18:13:36  dhclient: last message repeated 2 times
Jul 29 18:13:36 qwindoo kernel: [ 1846.899122] wlan0: no IPv6 routers present
Jul 29 18:13:57 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Jul 29 18:14:00 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Jul 29 18:14:03 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
Jul 29 18:14:07 qwindoo dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): DHCPv4 request timed out.
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): canceled DHCP transaction, DHCP client pid 5212
Jul 29 18:14:12 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
Jul 29 18:14:12 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) started...
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Jul 29 18:14:12 qwindoo NetworkManager[923]:  Activation (wlan0) failed for access point (Livebox-7435)
Jul 29 18:14:12 qwindoo NetworkManager[923]:  Activation (wlan0) failed.
Jul 29 18:14:12 qwindoo NetworkManager[923]:  Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) complete.
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): deactivating device (reason 'none') [0]
Jul 29 18:14:12 qwindoo kernel: [ 1882.422940] wlan0: deauthenticating from 5c:33:8e:8e:33:66 by local choice (reason=3)
Jul 29 18:14:12 qwindoo wpa_supplicant[1261]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
Jul 29 18:14:12 qwindoo kernel: [ 1882.552491] cfg80211: All devices are disconnected, going to restore regulatory settings
Jul 29 18:14:12 qwindoo kernel: [ 1882.552506] cfg80211: Restoring regulatory settings
Jul 29 18:14:12 qwindoo kernel: [ 1882.552519] cfg80211: Calling CRDA to update world regulatory domain
Jul 29 18:14:12 qwindoo NetworkManager[923]:  (wlan0): supplicant interface state: completed -> disconnected
Jul 29 18:14:12 qwindoo kernel: [ 1882.561987] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
Jul 29 18:14:12 qwindoo kernel: [ 1882.561997] cfg80211: World regulatory domain updated:
Jul 29 18:14:12 qwindoo kernel: [ 1882.562001] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 29 18:14:12 qwindoo kernel: [ 1882.562008] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:14:12 qwindoo kernel: [ 1882.562014] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:14:12 qwindoo kernel: [ 1882.562019] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:14:12 qwindoo kernel: [ 1882.562024] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 29 18:14:12 qwindoo kernel: [ 1882.562029] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.