12

After installing Ubuntu 13.04 x64, I realised that my sound wasn't working (only headphone showed up in settings).

Following this guide, I manually added my Dell Studio 1740 audio hardware to:

 options snd-hda-intel model=dell-m6

Within etc/modprobe.d/alsa-base.conf.

Using the test speakers feature, I found that no sound was coming out of my right speaker (the one with the power and volume dials).

  • Please clarify your question. Did this modification fixed your problem? Added more problems? If your are dual booting with Windows, does the speaker work under Windows? – edwin Jul 5 '13 at 19:21
  • The modification allowed me to move from no sound to sound. However I am still getting no sound from second speaker. – A T Jul 5 '13 at 19:24
  • Hardware problem ? : Could be that just the cable is interrupted inside your notebook or the contacts ? – dschinn1001 Jul 15 '13 at 17:15
  • So you're saying I should buy a new cable and try with that? - FYI: My speakers are Altec Lansing VS4121. – A T Jul 16 '13 at 11:13
  • 1
    @AT - not too quickly ! have overseen, that you said, it works all under windows ? - if it is same under windows, then it is something with cable, plug - but at which location ? - be tender to your technics! – dschinn1001 Jul 16 '13 at 21:43
13

Just watch an Alsamixer Tutorial.


...try going to alsamixer (type alsamixer in terminal).

alsamixer

I found many bars having their right channel lower than their left. (In this image you see only one bar). So I just lowered all their volumes to zero and back up again so they became even.

(Navigation in alsamixer is easy. Just use your arrow keys. Right and left to select the bar, up and down to lower/raise the volume).

Make sure your sound card is the one selected. Pressing F6 will show you a list for the available sound cards. Select yours! ...If you're not sure try them all. It's not dangerous ;)

...It's a bit odd that balance wasn't showing this difference in channels in the sound settings nor in pulse audio volume control. alsamixer did the trick however. Hope this helps.

  • Worked for me also after increaseing the last 2 columns, right speaker started working. – Adrian Apr 5 '16 at 15:32
5
+25

First open Sound settings:

Sound settings

Then in Output tab adjust the balance for left and right speakers:

Sound output

Also you can click on Test Sound button to test the volume for each speaker.

  • 1
    Thanks, but the Test Sound dialogue is how I confirmed that no audio was being outputted from my right speaker. – A T Jul 16 '13 at 10:42
  • @AT Then most probably there is a hardware problem. – Radu Rădeanu Jul 16 '13 at 10:51
1

Open Pulseaudio volume control, then under the Playback tab (first tab from the left) check each channel volume level and check if the channels' volume levels are locked between them (they have to be locked in order to keep the same volume level for the two channels -left and right-). As a side check, check the plug too. Sometimes a bad contact kills the sound of one of the channels.

  • Thanks, but that doesn't work. Additionally the speakers and jack work fine when used on my Windows partition. – A T Jul 15 '13 at 12:06
  • He just has hardware problem with speakers. – Barafu Albino Jul 15 '13 at 14:12
0

pavucontrol did the trick for me.

sudo apt-get install pavucontrol

I am using Ubuntu 14.04 on this hardware (Intel motherboard) https://hardwarerecs.stackexchange.com/questions/7624/i-love-my-raspberry-pi3b-as-a-workstation-but-what-is-the-next-step-better/7625#7625

(A $38/free shipping to US) for-real computer.

I thought it was hardware until running pavucontrol.

It showed that one channel was turned all the way down. As soon as I started moving one they moved together, and it now works great.

  • Not sure. Anyway, this was 4 years ago, had a different laptop for 3.5 years and got a new laptop yesterday. Not sure about this old Dell of mine. – A T Jun 29 '17 at 5:37
0

I too faced this problem not just with one Linux OS but all of them.

I was using creative sound blaster 0106. I tried all that I could but failed.

I recollected earlier I had Yamaha sound card and when I changed from windows XP to 7 but it did not work and so I procured Creative which worked fine with Windows 7 Ultimate after downloading and installing drivers for Windows 7, so I thought why not go back to Yamaha sound card and give a try in Linux.

It works fine without any additional effort.

So the problem is with Sound card and not Linux.

In addition I would like to add I was very impressed by Windows 7 but using genuine free edition of Linux Mint Sarah is a big pleasure and it upgraded to to Serena like a song I have tried many Linux distributions like Ubuntu PC Linux Peppermint and liked all of them and now settled with Linux Mint Serena. Hats off to Linux creators

  • 2
    Can you please edit this so that it's not just a wall of text? – user58 Feb 16 '17 at 11:18
  • 1
    Better have a look at the sound card for sound problems Try a different sound card – Govindarajan Natesan Feb 18 '17 at 2:09

protected by Community Aug 5 '18 at 23:45

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.