I upgraded my Ubuntu OS from 12.10 to 13.04 and after the process of upgrading it via Software Updater, it requested me to restart the computer.

I rebooted and on boot I proceeded to a purple screen with Ubuntu text and 5 dots below it and continued to a blank black screen with a blinking underscore character (_).

enter image description here

I have all my files in there and I can't access them. I tried the grub boot menu edit that other questions pointed out, but it didn't seem to do anything.


Try the following:

press Ctrl+Alt+F1

You'll see a terminal for login, enter your credentials and execute the following command:

sudo service lightdm --full-restart

Enter your password again and you should see the login page

| improve this answer | |
  • This fixed it for me, thanks! Unfortunately I have to about 50% of the times, any idea why, and how to get it fixed for good? – akmur Jan 13 '14 at 8:37
  • 1
    just accidently pressed ctrl+alt+function key, and got blank screen with cursor. Clicked ctrl+alt+F7, desktop back again. Thanks. Your answer give the hint. – devprashant Aug 3 '16 at 4:06
  • I m in the same situation but my computer doesn t recognize my credentials – HoCo_ Feb 27 '19 at 8:43

Here’s what worked for me, on a Dell Precision M6800 laptop running Ubuntu 16.10:

First, at the black screen with the cursor in the top-left (which wasn’t blinking in my case), I followed this answer and pressed Ctrl+Alt+F1 to show a terminal, and logged in with my username and password.

That answer suggests running sudo service lightdm --full-restart, but the command only gave me an error. Instead, this answer’s solution of removing and reinstalling lightdm was what brought me forward. Note that a wired internet connection is required for the apt-get install part; wireless internet is apparently not set up yet at this stage in the boot process.

sudo apt-get purge lightdm
sudo apt-get update
sudo apt-get install lightdm
dpkg-reconfigure lightdm
sudo reboot

After this reboot, the login screen successfully showed, at the point in time where previously the one-line log message disappeared and the underline cursor appeared. But when I entered my correct password to log in, I only got the error “Failed to start session” in red text.

The article ‘Fix “Failed To Start Session” At Login In Ubuntu 14.04’ helped with that. At the login screen with the error message, I pressed Ctrl+Alt+F1 again to show a terminal, and logged in. Then I ran sudo apt-get install ubuntu-desktop, which installed ubuntu-desktop for the first time. Finally, I ran sudo reboot to reboot.

When the computer finished rebooting, I was able to successfully log in at the login screen and return to using the computer normally.

| improve this answer | |

I dont know if this will help you but, this happened to me after I moved around harddrives from one computer to another. I had a black screen with a comand cursor blinking and taunting me everytime I tried to boot. After reformating and installing and reinstalling. I checked my setup and my comp was booting the wrong hard drive. I swapped the drive order and the bootloader came up.

Again, this was just my experience with the black screen cursur blinking. Solution was:

F2 > boot > swap boot order of drives.

| improve this answer | |

I had similar problem and solved it by following steps:

first press Ctrl+Alt+F1(or F2, F3, F4)

You'll see a terminal for login, enter your credentials and execute the following command:

ps -aux | grep --color "lightdm"

then, you will see processes that run lightdm, so you should kill those process:

kill -9 -15 <process number>

after that graphical login screen appears.

| improve this answer | |

Apparently this is an issue that can happen, especially with SSD drives.

The solution would be to install gdm and use that instead.

sudo apt-get install gdm

and when prompted, select it. If you want to switych back to lightdm:

sudo dpkg-reconfigure gdm

This is the source.

| improve this answer | |
  • gdm broke my computer even more, preventing me from using Ctrl+Alt+F1 to enter the command line. To switch back to lightdm, I had to hold Shift during boot to enter Recovery Mode, enter the root shell, mount the disk as rw, login as my user, and sudo dpkg-reconfigure lightdm. – Rory O'Kane Feb 14 '17 at 21:36
  • gdm has been upgraded to gdm3 in 18.04 and later. – karel Oct 25 at 6:28

Have you tried the options listed at this My computer boots to a black screen, what options do I have to fix it? Also, do you have a discrete graphics card, possibly with Optimus technology? If yes, please install bumbleebee project from Bumblebee wiki.

| improve this answer | |

I was unable to switch to other TTYs as is recommended in other answers. I had a blinking cursor, but otherwise my system was unresponsive.

Root cause for me: Bad package upgrade (?improper shutdown?) left my system/dpkg in a broken state.

Detection: After using recovery mode to get to the root shell, I tried apt-get purge lightdm as per previous answers. This command failed, with a message: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.


  1. Get to a root shell if you haven't already. You can do this by booting into 'recovery mode' from grub, and using the keyboard to select the root prompt option.
  2. Run dpkg --configure -a.
  3. If this was indeed your problem, it will resume some package installation that was not completed. For me, that was a kernel upgrade with an nvidia driver component.
  4. Be patient. After it is completed, try reboot and see if it has fixed your problem.
| improve this answer | |

In Ubuntu 18.04 and later lightdm login display manager has been replaced by gdm3 and the keyboard shortcut to access the virtual console has changed from Ctrl+Alt+F1 to Ctrl+Alt+F3. sudo dpkg-reconfigure lightdm has been replaced by sudo dpkg-reconfigure gdm3. sudo service lightdm restart has been replaced by sudo service gdm3 restart.

| improve this answer | |

Not the answer you're looking for? Browse other questions tagged or ask your own question.