These two nice SE posts (1, 2) comment on restarting one's ubuntu machine but they leave me with a few questions:

  1. How do you actually do the restart (I'm a beginner and using 12.04.1 LTS)?
  2. Should I always restart the system when prompted to?
  3. Does restarting the system affect access to it via SSH or there any other caveats one needs to think about before doing this?
  • 2. no: bug
    – jarno
    Apr 30, 2017 at 21:03

6 Answers 6


Should I restart when prompted?

Yes, you should. For most cases, a restart is required when an update to the Linux kernel has been installed. These updates are usually security updates, and then only come into effect after a reboot. Updates to normal applications such as Firefox come into effect after you restart the program. Firefox should prompt you to do this automatically, but other programs may not, so it's something to bear in mind.

How to restart:

To restart the computer in Ubuntu 21.04, click the power icon in the upper right corner of the screen, and select "Power Off/Log out". In the sub-menu that appears, click "Restart...".

To restart from the command-line, run this command:

$ sudo reboot

The downsides of restarting:

On the whole, restarting is a very safe operation, and I would not consider it in any way unsafe. Of course, when you restart the computer, you lose all the information in RAM, so make sure you save all open documents and files before shutting down your computer. While you are restarting, your computer will of course be offline for a few minutes. If you're running a server, it will be down for a few minutes. If you have an open SSH session, it will be terminated.

  • 6
    Just to add to the downsides: If you have any process running, like memcache, MySQL, a mounted disk, etc.., those might not return after the reboot (depends on how they were configured). Also, it's best to shut them down manually before the reboot.
    – Noam
    Jun 14, 2016 at 8:55
  • 2
    @Noam: To answer your first point, that's true, but wouldn't you rather discover that when you're there to reboot the machine rather than when the kernel panics in the middle of the night? For your second point, why would it be best to shut them down manually? It's the same process either way.
    – Flimm
    Jun 14, 2016 at 9:03
  • 1) I agree the term downside isn't exactly correct, but I do think it's important to be aware of this, and to plan the process accordingly 2) Is it? I'm sure you're much more knowledgable than I am on these issues, but I was under the impression doing a manual service stop/graceful can be both be safer and you'll also be able to see any on-screen errors/warnings. Am I wrong?
    – Noam
    Jun 14, 2016 at 14:41
  • No, absolutely not always. In the OP's case, where he's doing unattended upgrades, yes, but in fact the "restart required" flag gets set whenever grub changes (among other things, I believe) and so is set if you only remove old kernels.
    – Auspex
    Mar 7, 2017 at 18:11
  • It may also be necessary to use sudo apt-get autoremove to remove the obsolete kernels. I have to do this on some servers before the reboot because my boot partition can only hold 3 or 4 kernels at once.
    – Phil_1984_
    Mar 14, 2017 at 16:32

Should I always restart the system when prompted to?

You may view the list of packages that require a restart with:

more /var/run/reboot-required.pkgs

Based on the list, you can decide whether it is worth restarting.

Example of output:

user@server:~$ more /var/run/reboot-required.pkgs

(The answer was tested on Ubuntu 14.04 LTS x64 and Ubuntu 16.04 LTS x64)

  • 2
    Do you have a resource for determining which packages make a restart a must (i.e. important security)? I have no idea from looking at this list.
    – glaux
    May 30, 2019 at 13:34
  • @glaux you can try looking through usn.ubuntu.com (Ubuntu security notices). May 7, 2020 at 16:43
  1. How to restart:

    $ sudo reboot


    $ sudo init 6
  2. Yes as its most probably a security updates.

  3. Nothing will affect ssh connectivity after restart.


Another caveat I haven't seen anyone else mention:

If the box you are SSH'ing into is connected via wifi then when you reboot you may not have access to the wifi network until a user physically logs in in at the remote machine which means SSH will fail since the box won't be connected to the network.

To avoid this, on the remote machine you have to configure the wifi in advance to be available to all users. Click the network icon in the system tray and choose "Edit Connections..", select your wifi network and click edit button, then make sure "Connect automatically" and "Available to all users" check boxes are checked.

You can also apparently solve this by messing with /etc/network/interfaces and wpa_supplicant but I found that road much more complicated than simply checking the box.

Side note: For me, before making the above change, connecting from WSL on windows to an ubuntu box gave "Resource temporarily unavailable". Googling this will take you down a rabbit hole of possible WSL bugs, but for me the problem was simply that the wifi wasn't connected until someone logged in. Applying the above fix solved the issue.

  1. Another option is using sudo shutdown -r now

  2. If prompted, you should do so; as system have things need to be applied (most common if you choose to download and install updates automatically, or you have changed something yourself that requires a reboot to apply changes to your system).

  3. SSH will definitely be affected on a reboot and it will be terminated. I may suggest Putty as it will give an option on its context menu to reconnect the session.


Always try to Restarting the pc after ubuntu updates, install drivers and some application that wants to restart the OS(ubuntu).

when new updates are installed or driver is installed these wants to restart the OS for working performance and properly use.

Normal application or package don't need to restart the OS after installed.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.