Can someone help me with this problem ? I am new to Linux, so I do not know commands and I never did something like installing or compiling with command-line.

I bought WiFi adapter from Edimax, model EW-7811UN for my PC (not laptop, so I do not have wifi card, only ethernet). When I go through guide on CD, I came across a version of kernel. It said I need version 2.6, but I have 3.5.0-22-generic.

I got errors like I do not have file or folder etc. Can someone tell me where I can download compiled driver and where I need to put it? Or some other advice. I don't want downgrade kernel when it is not necessary.

  • It does not seem to work anymore; 13.04, 3.8.0-25-generic; the kernel driver allows connection to open wifis, but the connection is severed after 2 minutes or so; then I tried to build the Realtek driver with all patches I could find; it compiles but the connection is as flaky as before; furthermore when I unplugged the adapter, I got a kernel panic, any helps? Jul 4, 2013 at 6:19
  • @AnttiHaapala a little late but try one of the git hub versions with the newer kernels and enable the module with 8192cu instead of rtl8192cu or build with the driver from the realtek website using kernel 3.2LTS
    – mchid
    Aug 9, 2014 at 15:41
  • NP now for me now, I do not even know where this device is anymore, I just needed it for my laptop after the internal antenna was severed (now fixed) Aug 9, 2014 at 18:07

6 Answers 6


If you run into this problem, what worked for me was installing the following driver: https://github.com/pvaret/rtl8192cu-fixes

From the README.md file:


Ensure you have the necessary prerequisites:

sudo apt-get install linux-headers-generic build-essential dkms

Clone this repository:

git clone https://github.com/pvaret/rtl8192cu-fixes.git

Set it up as a DKMS module:

sudo dkms add ./rtl8192cu-fixes

Build and install it (this version number may change, it is .11 as of November 07 2019)

sudo dkms install 8192cu/1.11

Refresh the module list:

sudo depmod -a

Ensure the native (and broken) kernel driver is blacklisted:

sudo cp ./rtl8192cu-fixes/blacklist-native-rtl8192.conf /etc/modprobe.d/

And reboot. You're done.

  • 1
    As a note I just did this and after the line: sudo dkms install 8192cu/1.8 I got an error. That error was: Error! Could not find module source directory. Directory: /usr/src/8192cu-1.8 does not exist. Turns out that I needed to change the /usr/src/8192cu-1.8 to /usr/src/8192cu-1.9 Must have been a recent update to the GIT and these instructions are out of date by that one digit.
    – user294179
    Jun 16, 2014 at 22:17
  • Take a look in the /usr/src directory. You may have 1.9 instead if you downloaded the latest version. ;)
    – Will Sams
    Jul 23, 2014 at 10:01
  • This works fine for me for TL-WN823N V1.2 under Ubuntu 16.04, Thank you very much! Jul 7, 2016 at 7:43
  • 1
    This works on Ubuntu 16.10. However, a question: lsmod shows me that the new driver is working instead of the old one (and my connection is now stable...). However, if I click on "connection information" visually on my unity tray, it says that rtl8192cu (instead of just 8192cu) is still in use. Does someone know why that is the case?
    – Nearoo
    Oct 27, 2016 at 22:43

12.04 & 14.04+: you can view these instructions or just do as I say.

(use these instructions when your wireless USB device [rtl8192cu] is not automatically recognized by Ubuntu)

sudo modprobe rtl8192cu
echo "2001 330D" | sudo tee /sys/bus/usb/drivers/rtl8192cu/new_id
echo "rtl8192cu" | sudo tee -a /etc/modules

Then, edit /etc/rc.local by opening the file with your favorite text editor like in this example:

sudo gedit /etc/rc.local

make sure it says . . .

echo "2001 330D" | tee /sys/bus/usb/drivers/rtl8192cu/new_id

exit 0

You can use the wireless now or, alternatively, you can make sure you have all of your work saved before you type:

sudo reboot

Your wireless driver should start up automatically.

To compile and install the proprietary Realtek 8192cu driver, run the following commands in an open terminal:

sudo apt-get update && sudo apt-get install git build-essential linux-headers-generic dkms
git clone https://github.com/dz0ny/rt8192cu.git --depth 1
cd rt8192cu
sudo make dkms

For hard installation use:

sudo make install

instead of sudo make dkms .

To enable this driver, use the command:

sudo modprobe 8192cu

Finally, update /etc/modules with this command before you reboot:

echo '8192cu' | sudo tee -a /etc/modules

Souce #1: bernaerts.dyndns.org

Source #2: github.com/dz0ny

  • This works awesome for D-link A-131
    – mchid
    Dec 26, 2013 at 7:07
  • Thank you so much. I fought with my Asus USBN13 for two days before finding your answer. It worked when everything else had failed and I was about to give up.
    – Swoogan
    Sep 1, 2014 at 14:35
  • Great, has worked for TP-Link TL-WN821N on Xubuntu 12.04 on the first pass. Jan 2, 2015 at 21:26
  • I can't build the driver source: $ sudo make install install -p -m 644 8192cu.ko /lib/modules/3.13.0-44-generic/kernel/drivers/net/wireless/ install: cannot stat ‘8192cu.ko’: No such file or directory
    – Andy
    Feb 18, 2015 at 21:41
  • @Andy First, run make. Then, run sudo make install. I edited the answer. Thanks for pointing that out.
    – mchid
    Feb 24, 2015 at 3:03

Generally speaking, any Linux driver on a vendor CD would be outdated, and, in most cases, would not be worth bothering with. The RTL8192cu module has been part of the Linux kernel since version 2.6.38, so that, ideally, you'd only need to plug the device in, and it would work. Unfortunately, that particular module hasn't ever worked, and, IMHO, a fix has been long overdue (bug report).

So, what should you do? Plug in the device. Verify that the network manager 'sees' the wireless networks around (may also verify that the correct module is loaded by running lsmod | grep 8192). Try connecting to your network. If that doesn't work, try connecting to any network. If that doesn't work, you are affected by the bug, and will have to try the driver from http://www.realtek.com.

  • Download the driver from here, and put the downloaded file into your home folder.

  • Blacklist the existing module. In a terminal window, run

    gksu gedit /etc/modprobe.d/blacklist.conf, add blacklist rtl8192cu to the bottom, save and exit, then reboot.

  • Extract the downloaded archive: right click, Extract here, or run

    unzip RTL8192xC_USB_linux_v3.4.4_4749.20121105.zip

  • Install. In a terminal window, run

    sudo bash ./RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105/install.sh

  • Thanks very much, it's better, but I got problem... Compilation is ok, but after it I need edit install.sh or something because new folder with compiled driver is "locked" and I have to do chmod 777 on every folder and file for root ... by tutorial without editing my PC freezed and I had to reboot (after line compiling driver ok and before line with remove, insert and install driver). Do you have any ideas or can you help me with fast editing rights ? Or some simple tut. how to do it through terminal and not by install.sh :) Thanks Jan 23, 2013 at 17:14
  • You should not chmod anything, and I would not recommend playing with permission. Simply do what's posted above, nothing else. :~) Jan 23, 2013 at 18:06
  • Hm.. but my PC freezed ... I have to reboot.. I can't do anything and when I reboot, I see created folder by installer with lock icon :/ PC freeze before step with remove, insert and install .. It show me line that authorization is required, but it freezes and I have to reboot :( I can't go through that... Jan 23, 2013 at 20:54
  • Not sure. Running install.sh with sudo should give you correct permissions. Jan 23, 2013 at 21:27
  • maybe I didn't have rights because of freezing PC... but I don't know why it freezed :/ Is it possible to do this manually ? without autoinstall ... maybe I'll find some problems during process or something like that.. Jan 23, 2013 at 23:22

It works well. Only issue you should cd to the directory first.


cd RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105

sudo bash ./install.sh
  • The only trouble I had installing with this method was that one of the compressed archives called by install.sh had an extra directory when uncompressed so the install script couldn't find it. To fix this problem you can edit the install script or uncompress the archive, copy and paste the directory found in the top level into where the compressed directory is, delete the compressed directory and compress the pasted directory using the proper name. Then, run sudo ./install.sh and it should work.
    – mchid
    Feb 24, 2015 at 3:16

Can you provide details of what commands you used to setup the drivers or be specific about the errors when you tried ? I also found : installing Edimax EW7811, to install the drivers sequentially if the manual wasn't clear enough also try using the search bar too, many have reported errors on Edimax drivers as well.

Link to the linux drivers for Edimax EW7811UN from their website : Download (in case if you have any other version installer)

  • I use some tutorials, but I freezed with command sudo make ... <p> cp: nie je možné stat() `/autoconf_rtl8192c_usb_linux.h': </p> This is what terminal said. It is in slovak, because I have slovak version of Ubuntu 12.10 :) I think you can translate it easily.. Jan 22, 2013 at 20:58
  • EDIT: errors are here: kario.wz.cz/upload/linux.txt I have slovak version of Ubuntu 12.10 so errors are in slovak too :)) Jan 22, 2013 at 21:59
  • Try make clean before your first command, that solves the problem some time.
    – Andrew
    Jan 23, 2013 at 16:02
  • I always do make clean before make like in tutorial, clean run without error but make do errors, but I don't know how to "repair" them .. Jan 23, 2013 at 16:05
  • @MarošKáčko-DonnieKario the reason it does not work is because, starting with kernel 3.4 there were some changes to the kernel headers and some of the macros used to make the driver that are now depreciated and so the build results in the errors you receive. You can build with the standard LTS kernel 3.2 or you can use the updated DKMS version from github as described in my answer.
    – mchid
    Aug 9, 2014 at 15:38

I downloaded a newer version of the driver and installed it with: sudo dkms install 8192cu/1.9

So, keep in mind to install using your driver version.


You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .