32

I would like to configure my Ubuntu 12.04 server to synchronize its clock with a specific NTP server. Where to set this up?

0

2 Answers 2

40

Installation

Install via the software center

or if you prefer command line ...

sudo apt-get install ntp

Configuration

sudo nano /etc/ntp.conf

This file will probably have the default Ubuntu server activated. You can check http://www.pool.ntp.org/zone/europe or http://www.pool.ntp.org/zone/north-america or http://www.pool.ntp.org/zone/asia for local (country based) servers. Just comment out all of the servers by adding a # in front of it and add in the one you want to use.

Activating the new changes

sudo service ntp restart

Checking if it synchs

sudo ntpq -c lpeer

This will show a list of all the servers and when they where last checked. Random example from the web:

enter image description here

See logging

sudo tail -f /var/log/syslog

Do make sure, if you are using a firewall, to open UDP 123.

3
  • 4
    Why open up the port? Stateful firewall will recognize request came from this machine outbound first, yes?
    – Dave
    Commented Apr 1, 2013 at 18:28
  • I used port 37 and that appeared to work?
    – Jason
    Commented Feb 20, 2014 at 0:21
  • Just in case the initial timezone was incorrectly set, the proper way to change it is to use the sudo dpkg-reconfigure tzdata command. Commented Mar 6, 2015 at 11:58
11

First, make sure that you have NTP installed, just press Ctrl+Alt+T on your keyboard to open Terminal. When it opens, run the command below.

sudo apt-get install ntp

Then edit the file below to add time servers.

sudo nano /etc/ntp.conf

To add time-servers to synchronize with, use USA Servers or Europe Servers.

Then, restart NTP service

sudo service ntp restart

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .