I've tried for many hours now to find a solution to my issue, but I can't seem to locate a permanent explanation - I'm also an ultra noob, so forgive me if I get the basics incorrect.
I have a server running on LTS Ubuntu 22.04 with two interfaces, eno1 and eno2 - one interface has an internet connection (eno1) which I would like to have priority over the interface without an internet connection (eno2). I have this setup because I'd like to transfer files between LAN over eno2 while utilising the eno1 network.
The issue I'm having is that when booting up the server or establishing a connection to eno2, a route entry is automatically generated giving the eno2 interface a metric of 0; which from what I've researched means that my network traffic will utilise that interface over others - which in turn, disables me from using the internet.
This is a server installation of Ubuntu, I'm looking for both interfaces to be on separate subnets as the PC connected to the server through LAN has a separate interface for an internet connection.
I don't need the hosts connected to eno2 to be able to have internet access, just for eno1 to be the default connection for the server.
What I've tried -
- Doing the command:
sudo ip route del 192.168.0.0/24 dev eno 2 proto kernel scope link src 192.168.0.88solves the issue, however, this is not permanent as when the system reboots or a connection is established through the interface it just recreates the route with a metric of 0.
- I've tried adding an identical route entry into
/etc/netplan/00-installer-config.yamlbut that just creates a new entry with a different metric.
- I've tried creating a script that will automatically delete the route when the system starts - but, this route is added back when a connection is made to the server's eno2 interface.
default via 192.168.0.1 dev eno1 proto dhcp src 192.168.0.2 metric 100 192.168.0.0/24 dev eno2 proto kernel scope link src 192.168.0.88 192.168.0.0/24 dev eno1 proto kernel scope link src 192.168.0.2 metric 100 192.168.0.1 dev eno1 proto dhcp scope link src 192.168.0.2 metric 100 188.8.131.52 via 192.168.0.1 dev eno1 proto dhcp src 192.168.0.2 metric 100 184.108.40.206 via 192.168.0.1 dev eno1 proto dhcp src 192.168.0.2 metric 100
Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eno1 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eno2 192.168.0.0 0.0.0.0 255.255.255.0 U 100 0 0 eno1 192.168.0.1 0.0.0.0 255.255.255.255 UH 100 0 0 eno1 192.168.4.100 192.168.0.1 255.255.255.255 UGH 100 0 0 eno1 192.168.8.100 192.168.0.1 255.255.255.255 UGH 100 0 0 eno1
network: ethernets: eno1: dhcp4: true eno2: dhcp4: false addresses: [192.168.0.88/24] version: 2
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdic noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST.MULTICAST.UP.LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether (MAC) brd ff:ff:ff:ff:ff:ff altname enp3s0f0 inet 192.168.0.2/24 metric 100 brd 192.168.0.255 scope global dynamic eno1 valid_lft 86395sec preferred_lft 86395sec inet6 fe80::2fd:35ff:fefc:5648/64 scope link valid_lft forever preferred_lft forever 3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether (MAC) brd ff:ff:ff:ff:ff:ff altname emp3s0f1 inet 192.168.0.88/24 brd 192.168.0.255 scope global eno2 valid_lft forever preferred_lft forever inet6 fe80::2fd:45ff:fefc:5649/64 scope link valid_lft forever preferred_lft forever
If there's anything you can help with, I'd be much appreciative. Also, if there's further information you need, I'll gladly oblige.