17

i install ubuntu server 10.04, have 64 Gb VHD.

And want to separate partitions in this mode:

/dev/xvda0 p on swap (2 Gb)
/dev/xvda1a0 e on /boot (128 Mb)
/dev/xvda1a1 e on / type ffs (local)
/dev/xvda1a2 e on /usr type ffs (local, nodev)
/dev/xvda1a3 e on /tmp type ffs (local, nodev)
/dev/xvda1a4 e on /var/log type ffs (local, nodev)
/dev/xvda1a5 e on /var type ffs (local, nodev, nosuid)
/dev/xvda1a6 e on /home type ffs (local, nodev, nosuid, with quotas)
/dev/xvda2 p on /new (local, nodev, nosuid, noexec) with rest of space ~50Gb.

But i'ma stuck, and don't know what size to give to each folder.

Also i want to encrypt partitions.

Thank you for any tips.

EDIT: System need minimum size, here will be installed about 10 apps like ufw, apache,mysql, chkrootkit and so on.

0
13

First, I would put all space, except /boot, in a LVM2 volume. That's because it makes it so much easier to adjust partition size later, even on live systems and modern file systems.

Then I would make root small about 1GB, /usr about 6GB, /var about 2GB, /boot about 512 MB, swap same size as RAM, /var/log, /home and /srv large enough. It can be adjusted later.

I would not used all unallocated space now, as that could later be used to expand the other partitions, as I'm using LVM2. I could even add new paritions like /tmp, but that is a bit more complicated. I never use anything but LVM2 anymore. With that, I can even move the installation to RAID disks in less than 30 minutes, including creating and copy files and all.

For more information about LVM2, read this: http://www.debian-administration.org/articles/410

Yes, about encryptions, please have a look at Luks support:

6
  • 1
    Shouldn't SWAP be a bit bigger than RAM?(Then again, I'm a hypocrite, as I use 256MB swap on 4GB RAM)
    – nanofarad
    Jun 6 '12 at 20:18
  • 1
    Swap shoul be as large as you need it to be, not larger. :) How large that is depends on what you run in your machine and how much RAM you got. There are recommendations about RAM to 2*RAM. But there are people that run perfectly well without any swap to. But I wouldn't recommend that unless you know what you do. And then you wouldn't ask here, would you? :)
    – Anders
    Jun 6 '12 at 20:37
  • 1
    Yes, if you want to hibernate your system, you'll need swap to be a bit larger than your RAM.
    – gerlos
    Mar 4 '14 at 9:25
  • @Anders I found this while searching for clues on LVM setup. Do you mean I don't need to set up RAID from scratch when I use LVM? How about this set up: I got server with 2 hard drives, the system is installed on /dev/sda, /dev/sdb is unused. LVM is not in use, AFAICT. Can I migrate to using LVM and RAID 1? Or should I reinstall from scratch? But then again, can I? (the machine is a server hosted by Leaseweb, I can reinstall different OS'es from their control panel, and even choose non-default options like partition layout, but I'm not sure how (if at all) can I instruct it to use LVM/RAID) Mar 24 '14 at 13:40
  • @Nickolai, Preferably, set up RAID with BOOT on mirror RAID on all and then rest as you like (RAID5 if 3 or more disks, RAID6 on 4 or more) and make LVM on that other part. If already installed with LVM, I would do this: Clean one disk of data, pref. the one not booting from. Make a BOOT mirror RAID (where the second disk is none) and a mirror RAID (since only two disks) of the rest. I would then make the second RAID a physical disk and add to the vg. After that transfer all data from the old disk in vg and then remove from the vg. After that make and add the first disk to RAID. Finished!
    – Anders
    Mar 25 '14 at 2:20
2

There is no correct or wrong answer,personally i would make a 12GB partition for my Ubuntu installation containing:

-> 6GB for root
-> 2GB for swap
-> 4GB for home 
0

Since this is an older versno 10 - my obervation using ubuntu 20 installed about 1 year ago - with 32 GB RAM and 1 TB HDD,are as: I do not have any major application other than openvpn, openssh, few drivers, virtualbox latest, additional printer drivers, I use wifi-usb dongle to connect to internet.

  1. root: / - even without mysql/oracle any other software -- its already 2 gb used up! I would suggest keep min. 4gb if you just use OS /browser, otherwise keep at least 6 to 8 gb

  2. /usr -- i have a single /usr with /usr/local/xx -- all local software, ClamAV, etc. etc in it right now its 6gb used up -- i would sugges keep this to 16 gb if you plan to update/add tools/etc every now and then for one year

  3. /var -- I regret keeping this partition just 6gb ( 5.7 gb usable for installation) -- its now 94% full -- w/o any major software in use. I would suggest to keep this 8 to 16 gb as per your usage or little more if possible.

  4. /tmp, swap -- keep min. 16 gb for /tmp (6 gb if you're constrainted) and SWAP partitions .

All would still work with jut 64 GB -- compare it with current versions of windows which need around 80-100 gb plus PAGE files ( 16gb approx) to work ok after frequent updates/patches .

-1

The correct answer is: / 500 gb (which is used by /tmp, /var, and /home. /Home is your long term storage whereas /tmp and /Var are short term; it stores almost everything so make it big. By also making it big, you Enable your computer to work with say a 498 gb file, so you could download afike that huge.

/Boot (1gb) /Usr (20gb) /Root (5gb) /Swap (2gb prevents failures, 2gb spillover)

By having a seperate /boot, /root and /usr, it makes backing your system that much easier. Once restored if still problem, delete user account and make new one. This is how you do it.

2
  • 1
    Please don't state that your answer is the correct answer Oct 16 at 8:18
  • The author's VHD has only 64GB.
    – karel
    Oct 18 at 4:35

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.