1

So I have the following setup - Alienware m15 R3 with two Dell U2719DC displays (first display is feeding the other via display port/MST) attached via USB-C/Thunderbolt 3 port. First of the displays (which feeds the other one and is connected to the laptop via USB-C) has two devices attached to the USB hub that is built into it - a keyboard and a mouse. What happens that at a random time (or because of a trigger?) the displays start shutting down and if I replug them they shutdown in a couple of seconds or even don't come up at all. I've noticed that the process sometimes starts when launching Android emulator (that starts severe on/off cycle), lspci/lswh trigger a single on/off cycle, some times at a random point. I tried to gather logs with tail -f /var/log/{messages,kernel,dmesg,syslog} during this on/off madness. I consistently see (a lot of these):

Feb  3 20:11:27 rudolfs-Alienware-m15-R3 kernel: [ 5918.379945] pcieport 0000:00:1b.0: Intel SPT PCH root port ACS workaround enabled
Feb  3 20:11:28 rudolfs-Alienware-m15-R3 kernel: [ 5919.648785] usb usb3: root hub lost power or was reset
Feb  3 20:11:28 rudolfs-Alienware-m15-R3 kernel: [ 5919.648790] usb usb4: root hub lost power or was reset

After some of them (around 70%) I have notifications about usb devices being disconnected:

Feb  3 20:12:24 rudolfs-Alienware-m15-R3 kernel: [ 5975.820361] usb 1-11: USB disconnect, device number 10
Feb  3 20:12:24 rudolfs-Alienware-m15-R3 kernel: [ 5975.820362] usb 1-11.1: USB disconnect, device number 11

When everything comes up again it seems that yeah these devices are the usb hub in the display, the keyboard and mouse (1-11.1 and 1-11.2 respectively):

 3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.323800] usb 1-11: new high-speed USB device number 10 using xhci_hcd
Feb  3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.748121] usb 1-11: New USB device found, idVendor=0451, idProduct=8442, bcdDevice= 1.00
Feb  3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.748127] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=1
Feb  3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.748131] usb 1-11: SerialNumber: E4010869A2EA
Feb  3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.749738] hub 1-11:1.0: USB hub found
Feb  3 20:12:06 rudolfs-Alienware-m15-R3 kernel: [ 5957.749786] hub 1-11:1.0: 6 ports detected
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.039762] usb 1-11.1: new full-speed USB device number 11 using xhci_hcd
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.141685] usb 1-11.1: New USB device found, idVendor=1532, idProduct=005c, bcdDevice= 2.00
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.141691] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.141694] usb 1-11.1: Product: Razer DeathAdder Elite
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.141697] usb 1-11.1: Manufacturer: Razer
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.462582] usb 1-11.2: New USB device found, idVendor=046d, idProduct=c339, bcdDevice=13.00
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.462583] usb 1-11.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.462584] usb 1-11.2: Product: Pro Gaming Keyboard
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.462585] usb 1-11.2: Manufacturer: Logitech
Feb  3 20:12:07 rudolfs-Alienware-m15-R3 kernel: [ 5958.462586] usb 1-11.2: SerialNumber: 086B367A3231

While everything is running, the output of lspci -tv is:

rudolfs@rudolfs-Alienware-m15-R3:~$ lspci -tv
-[0000:00]-+-00.0  Intel Corporation Device 9b54
           +-01.0-[01-03]----00.0-[02-03]----00.0-[03]--+-00.0  Advanced Micro Devices, Inc. [AMD/ATI] Device 7340
           |                                            \-00.1  Advanced Micro Devices, Inc. [AMD/ATI] Device ab38
           +-01.1-[04]--
           +-02.0  Intel Corporation Device 9bc4
           +-04.0  Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
           +-12.0  Intel Corporation Device 06f9
           +-13.0  Intel Corporation Device 06fc
           +-14.0  Intel Corporation Device 06ed
           +-14.2  Intel Corporation Device 06ef
           +-15.0  Intel Corporation Device 06e8
           +-16.0  Intel Corporation Device 06e0
           +-1b.0-[05-3d]----00.0-[06-3d]--+-00.0-[07]----00.0  Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 2C 2018]
           |                               +-01.0-[08-3c]--
           |                               \-02.0-[3d]----00.0  Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018]
           +-1b.4-[3e]----00.0  Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981
           +-1d.0-[3f]----00.0  Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951
           +-1d.4-[40]----00.0  SK hynix Device 1339
           +-1d.6-[41]----00.0  Realtek Semiconductor Co., Ltd. Device 3000
           +-1d.7-[42]----00.0  Intel Corporation Device 2723
           +-1f.0  Intel Corporation Device 068d
           +-1f.3  Intel Corporation Device 06c8
           +-1f.4  Intel Corporation Device 06a3
           \-1f.5  Intel Corporation Device 06a4

output of lsusb -tv is:

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 10000M
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 4: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
    |__ Port 4: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 7: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 7: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 10: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 10: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 11: Dev 15, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 5: Dev 18, If 0, Class=Human Interface Device, Driver=usbhid, 480M
        |__ Port 1: Dev 16, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 1: Dev 16, If 2, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 1: Dev 16, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 17, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 17, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 14: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 14: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M

Did a lot of googling before writing this up, so relevant stuff I've seen mentioned:

  • Thunderbolt security is off in BIOS
  • bolt package is installed
  • Nothing shows up in the Devices/Thunderbolt panel, but I assume that is fine, since none of the attached devices (2 monitors, keyboard and mouse) is actually a Thunderbolt device?

There were some mentions of thunderbolt ports going to sleep if inactive - so I cannot understand if the USB hub on the other end (in the display) is supposed to keep them alive or not? This issue is supper annoying since I actually need to use the Android emulator, but running it makes the machine unusable. Any advices, suggestions? I can provide any other needed info.

Not sure if that is relevant to the issue, but I have and unknown device in the Ubuntu software settings (I assume it is the Killer Wireless card, even though wifi works).Unknown Intel Device

Actually just noticed that there are single blocks of these errors:

Feb  3 20:12:30 rudolfs-Alienware-m15-R3 kernel: [ 5981.555749] usb 1-11: new high-speed USB device number 14 using xhci_hcd
Feb  3 20:12:30 rudolfs-Alienware-m15-R3 kernel: [ 5981.638519] usb 4-1: Device not responding to setup address.
Feb  3 20:12:30 rudolfs-Alienware-m15-R3 kernel: [ 5981.683827] usb 1-11: Device not responding to setup address.
Feb  3 20:12:31 rudolfs-Alienware-m15-R3 kernel: [ 5981.850723] usb 4-1: Device not responding to setup address.
Feb  3 20:12:31 rudolfs-Alienware-m15-R3 kernel: [ 5981.891708] usb 1-11: Device not responding to setup address.
Feb  3 20:12:31 rudolfs-Alienware-m15-R3 kernel: [ 5982.055666] usb 4-1: device not accepting address 3, error -71
Feb  3 20:12:31 rudolfs-Alienware-m15-R3 kernel: [ 5982.099676] usb 1-11: device not accepting address 14, error -71

and:

Feb  3 20:12:35 rudolfs-Alienware-m15-R3 kernel: [ 5986.151734] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
Feb  3 20:12:35 rudolfs-Alienware-m15-R3 kernel: [ 5986.151820] usb usb4-port1: attempt power cycle

0

You must log in to answer this question.

Browse other questions tagged .