0

AC600 Dual Band USB Adapter. I got it on amazon.co.uk .On the amazon website it doesn't say that it works on linux. Can anyone help. Thanks.

https://www.amazon.co.uk/gp/product/B06XZ5B5G9/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Edit:

when I ran the command lsusb I got this:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 13d3:3529 IMC Networks Bluetooth Radio
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 13d3:5a11 IMC Networks USB2.0 VGA UVC WebCam
Bus 001 Device 007: ID 0bda:c811 Realtek Semiconductor Corp. 802.11ac NIC
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Improve this question
8
  • 1
    So did you try it on Ubuntu? Which release? Does it work? What does lsusb show?
    – Pilot6
    Jan 28, 2021 at 11:15
  • what's lsusb ?
    – B D 100
    Jan 28, 2021 at 11:20
  • lsusb is a terminal command that will show connected USB devices. We can see what chipset is used in this adapter.
    – Pilot6
    Jan 28, 2021 at 11:29
  • I've put in what I got when I got lsusb
    – B D 100
    Jan 28, 2021 at 11:42
  • I linked a Q&A with the solution for this device.
    – Pilot6
    Jan 28, 2021 at 11:45

2 Answers 2

Reset to default
0

Speaking from experience, this device does work with Ubuntu 18.04 and 20.04, but you need to work for it.

These are the steps you'll need to follow:

  1. If you don't already have git or dkms on your system, install them: 
    sudo apt install git dkms
  2. Clone the unofficial Realtek 8812au drivers to your local machine: 
    git clone https://github.com/jeremyb31/rtl8812au-1.git
  3. Change to the source directory: 
    cd rtl8812au-1
  4. Compile the driver: 
    sudo ./dkms-install.sh

Once this is done, Ubuntu will recognize your WiFi adapter and it should work immediately after. If your WiFi settings are still greyed out, reboot and that should resolve the issue.

Disclaimer: I have not tested this on 12.04, 14.04, 16.04, or any non-LTS release of Ubuntu. If you are using something other than Ubuntu 18.04 or 20.04, your results may vary. Test often. Test well.

Improve this answer
2
  • I doubt that this will work. It is for rtl8812au, but OP has another device.
    – Pilot6
    Jan 28, 2021 at 11:43
  • I don't think this works for me. I tried it, rebooted it and nothing has changed. Is there a setting to change. I have ubuntu 20.04. thanks.
    – B D 100
    Jan 28, 2021 at 11:44
0

okay, I've solved my question. First tether usb to phone connection by connecting phone to computer by usb and configuring on phone settings 'tether'.

When you first install Ubuntu, in terminal use the command sudo apt-get update and sudo apt-get upgrade. Then in the command line [terminal] you should go back to the top directory.

sudo apt install git dkms
cd ~/
mkdir code
cd code
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
sudo ./dkms-install.sh
sudo make dkms_install

then reboot

Reference for code above (1)

Reference for code above (2)

As the question says above, you have to reboot twice. on the third reboot, the Wi-Fi [wifi] adapter dongle blue led light should flash every second.

Improve this answer
3
  • Post results from terminal for usb-devices | awk '/c811/' RS=
    – Jeremy31
    Jan 28, 2021 at 22:33
  • I have no idea what your talking about? ... but my answer might help any 'noob' or 'stonk' to understand how to enable a wifi adapter with ubuntu.
    – B D 100
    Jan 29, 2021 at 23:20
  • Check in terminal lsmod | grep cfg I don't think 88XXau works for your USB wifi as it should be a rtl8821cu device
    – Jeremy31
    Jan 30, 2021 at 10:36

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .