I can't install VMwarePlayer 4.0.3 on Ubuntu 12.04 64Bit. For Version 4.0.2, I found a script that I have to run and after that I could install 4.0.2. Is there an similar solution for Version 4.0.3?
I ran into the same problem, and I was able to make the same patch work by editing a version number in the script which applies it.
WARNING: I don't actually know what I'm talking about when it comes to VMware patching, I just made an educated guess that seems to work.
Whether you want to try this yourself depends on how risk-averse you are. But hey, your VMware Player install is already broken, right? I figured worst-case scenario I could uninstall and reinstall version 4.0.2.
I based this on the instructions I found here: vmware player compile issue. To boil it down to the simplest steps:
- Download this tarball: http://weltall.heliohost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz
- Extract the tarball in your home directory
- Edit the file patch-modules_3.2.0.sh. Look for the line
plreqver=4.0.2and change it to
- Save the file, then run it.
If you have run the same patch on version 4.0.2 before, you may get this error: "/usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting". If you see that, just delete the
/usr/lib/vmware/modules/source/.patched file and try again.
Please remember to have patch packet installed:
apt-get install patch. My default installation of latest Kubuntu didn't have it, so I got error:
./patch-modules_3.2.0.sh: line 42: patch: command not found
Sometimes, the version check does not properly. In this case, you could remove it by deleting the 4 lines following "unset product", all of them begin with "[". This again may increse the risk of breaking something.
Since VMware Player is not provided by the repositories, you have to instead download it here at the VMware website.
To install VMware Player, download the latest version for your architecture (newer versions are at the top of that list. That is, if you're running the 32-bit version of Ubuntu, get the 32-bit version, and if you're running the 64-bit version of Ubuntu, get the 64-bit version. If you're not sure which version of Ubuntu you're running, press Ctrl+Alt+T to open a Terminal window, then type in
uname -m and press enter. If it says
x86_64, you're running the 64-bit version of Ubuntu. If it says
i686, you're running the 32-bit version of Ubuntu.
After the download completes, go to the folder to which you downloaded it in the Terminal. You can do this with the
cd command. For example, if you put it in your
Downloads folder, run:
(In the Terminal, the
~ character at the beginning of a file path represents your home folder.)
Now make this installer file executable with the
chmod command. Currently, VMware Player 4.0.3 Build 703057 is the latest version, so for the 32-bit installer you'd run:
chmod +x VMware-Player-4.0.3-703057.i386.txt
Or for the 64-bit installer you'd run:
chmod +x VMware-Player-4.0.3-703057.x86_64.txt
(For future versions, the naming convention might change. In particular, the installers are usually named
.bundle rather than
.txt, since they are not true text files. Just use the full name of whatever file you download.)
The installer may need to build and install kernel modules, so it's advisable to make sure you have the necessary packages to facilitate this. Run
uname -r. The output should end in
virtual. If it doesn't end in
generic below with whatever it does end in.
sudo apt-get update
sudo apt-get install build-essential linux-headers-generic
Now run the installer. You have to run it as
root, so use
Or for the 64-bit version:
The rest of the installation process is guided and graphical. While you had to run the installer as
root, you do not generally need to (and should not generally) run VMware Player as
root after you've installed it. Occasionally, after an update to your kernel or VMware Player, VMware Player may ask you to allow it to build and install new kernel modules as
root. That's OK.
Note: You may get a kernel error when running it for the first time, if so try:
cd /tmp wget http://communities.vmware.com/servlet/JiveServlet/download/1553530-39784/patch-modules.sh wget http://communities.vmware.com/servlet/JiveServlet/download/1553530-39785/vmware-7.1-2.6.35-3-generic.patch sudo sh patch-modules.sh
If that doesn't work (and it asks you for the patch location) try this for the location:
This extra information was taken from here, and all I did was add the
/tmp/patch-modules.sh. If it doesn't work try referring to the forum link above.
Click on download Then Register IT Complete Registration Then Download The Version You Want To I Have Ubuntu 11.10 x64 bit Download Once Downloaded then run the Following Command
sudo apt-get install build-essential linux-headers-`uname -r`
then go to your Download Directory
cd Download (full command will be cd /home/your-user-name/Download) ls -l gksudo bash ./VMware-Player-4.0.2-591240.x86_64.bundle
You can download the
Vmware player for Linux from the official website with
.bundle as the extension.
After that navigate to the downloaded folder in terminal.
Then use the command:
sudo sh filename.bundle
it will do the remaining job.
It worked for me.
Works for different Versions, i tested it with version 22.214.171.1244019:
vmware-installer -l in a console to get version number.
Edit the file
Look for the line plreqver=4.0.2 and change it to plreqver=[copy and paste version number, just the three digit x.x.x ]
Remove the following lines:
unset product [ -z "$vmver" ] && error "VMWare is not installed (properly) on this PC" [ "$vmver" == "workstation$vmreqver" ] && product="VMWare WorkStation" [ "$vmver" == "player$plreqver" ] && product="VMWare Player" [ -z "$product" ] && error "Sorry, this script is only for VMWare WorkStation $vmreqver or VMWare Player $plreqver"
id -u" != "0" ] && error "You must be root to run this script" [ -f "$ptoken" ] && error "$ptoken found. You have already patched your sources" [ ! -d "$basedir" ] && error "Source '$basedir' directory not found, reinstall $product" [ ! -f "$fpatch" ] && error "'$fpatch' not found. Please, copy it to the current '$curdir' directory"
Now run the patch via
sudo sh patch-modules_3.2.0.sh
Virtualbox is similar to VMware player, but in contrast to VMware player it is contained in the repositories. The advantage for pulling from repositories is that you don't have to worry about updates, they come with the regular system updates. Virtualbox can read VMware images.
From the command line
apt-get install virtualbox, or search for
virtualbox in the Software Center.
If you really want to install VMware Player, find the
.debinstallation file for your architecture (32 or 64 bit). Usually double clicking will start installation. You are required to take care of all updates yourself in this case.
protected by Community♦ May 4 '12 at 15:39
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?