0

I have bought a new internal HDD hard drive as the previous one is old enough now I use Ubuntu and Kali Linux in dual boot and I have done a lot of customization and don't want to do that again with fresh install how do I clone both Kali Linux and Ubuntu as it is now to the new internal HDD without losing any data?

4
  • thanx a lot I have checked but my doubt is do I have to do it os by os like first Ubuntu then Kali or I can do both at the same time
    – Rane Navis
    Aug 6, 2020 at 19:16
  • Clonezilla can clone the whole drive to a new drive of at least the same size (not one single byte smaller).
    – sudodus
    Aug 6, 2020 at 19:32
  • Only supported releases of Ubuntu (standard support) are on-topic for this site. Ubuntu 14.04 LTS is EOL (end-of-life) thus off-topic, and Ubuntu 14.04 ESM is in extended support and only supported by Canonical via Ubuntu Advantage thus also off-topic here. Refer askubuntu.com/help/on-topic help.ubuntu.com/community/EOLUpgrades
    – guiverc
    Aug 6, 2020 at 20:08
  • You've tagged an EOL/ESM release so are off-topic, however FYI you can re-install without loosing settings with Ubuntu and official flavors (I don't know about Kali).
    – guiverc
    Aug 6, 2020 at 20:10

1 Answer 1

0

Copy the entire drive from one to another. The destination drive needs to be bigger or at least the same size as the source:

Boot into an install cd/usb, "try without installing"

Open gnome-disks or gparted or sudo fdisk -l: So you can identify which drive is which.

Open a terminal

sudo dd if=/dev/sdX of=/dev/sdY bs=1M status=progress

substituting X and Y for the device names you found on your system
/dev/sdX - (the old drive) the entire device, not just a partition(ie sdX1,sdX2).
/dev/sdY - (the new drive) again your writing to the entire device.

Should take a while depending on the size.

Not the answer you're looking for? Browse other questions tagged or ask your own question.