0

I bought a HP Stream 11 (Model 11-AK1035NR). I have installed Lubuntu 18.04 on a USB stick to use for it.

I have gotten the WiFi working before on this laptop after playing with it for a few hours. I had to install this again because of a crash on my USB stick. So WiFi is capable on this laptop, but I don't know exactly how I did it.

I have updated the kernel to Linux Kernel 5.2.2 with no success so far (although it does have the rtw88 which I have read is required). I've also looked around this site and saw a fix for RTL8821CE and then compiling a module and that didn't work either.

I have ran dmesg and this is what I got in terms of the WiFi hardware:

[   14.699016] rtw_pci 0000:01:00.0: Direct firmware load for
rtw88/rtw8822c_fw.bin failed with error -2
[   14.699025] rtw_pci 0000:01:00.0: failed to request firmware
[   14.706008] rtw_pci 0000:01:00.0: failed to load firmware
[   14.708202] rtw_pci 0000:01:00.0: failed to setup chip efuse info
[   14.710395] rtw_pci 0000:01:00.0: failed to setup chip information
[   14.720471] rtw_pci: probe of 0000:01:00.0 failed with error -22
1

The problem is this:

Direct firmware load for rtw88/rtw8822c_fw.bin failed with error -2

Please install the latest version of linux-firmware which contains it:

wget http://security.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.178.3_all.deb
sudo dpkg -i linux*.deb

Reboot.

2
  • This was the missing command. I figured I was close to solving it. It now works. – Christopher Welch Oct 13 '19 at 20:02
  • If my answer has been helpful, please accept it: askubuntu.com/tour The searchers will appreciate it. – chili555 Oct 13 '19 at 20:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.