0

I just bought a new Asus MB16AC monitor and trying to use it as third monitor on a Asus Zephyrus G GA502 via USB C. Here's the output of xrandr that shows it's properly detected but I have no display port signal:

Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
eDP connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080    120.00*+  48.00  
   1680x1050    120.00  
   1280x1024    120.00  
   1440x900     120.00  
   1280x800     120.00  
   1280x720     120.00  
   1024x768     120.00  
   800x600      120.00  
   640x480      120.00  
HDMI-A-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm
   1920x1080     60.00*+  50.00    59.94  
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.90  
   1280x960      60.00  
   1280x800      59.91  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  
DP-1-1 connected (normal left inverted right x axis y axis)
   1920x1080     60.00  
   1680x1050     59.95  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1280x720      60.00  
   1024x768      60.00  
   800x600       60.32  
   640x480       59.94  
  1920x1080 (0x45) 148.500MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  1280x1024 (0x47) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1280x960 (0x49) 108.000MHz +HSync +VSync
        h: width  1280 start 1376 end 1488 total 1800 skew    0 clock  60.00KHz
        v: height  960 start  961 end  964 total 1000           clock  60.00Hz
  1280x720 (0x4a) 74.250MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  45.00KHz
        v: height  720 start  725 end  730 total  750           clock  60.00Hz
  1024x768 (0x4b) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  800x600 (0x4c) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  640x480 (0x4d) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz

I installed displayLink but still no result

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.