I have a link-local address set up for an ethernet dongle via netplan:
# For USB eth dongle network: version: 2 renderer: NetworkManager ethernets: enx00249b1ec202: dhcp4: no dhcp6: no link-local: [ ipv4, ipv6] addresses: [169.254.11.25/16]
I currently have a Raspberry Pi connected to my PC through that dongle. I tried running
arp-scan but after running for a while, it couldn't find the Pi.
$ sudo arp-scan -I enx00249b1ec202 -l Interface: enx00249b1ec202, datalink type: EN10MB (Ethernet) Starting arp-scan 1.9.5 with 65536 hosts (https://github.com/royhills/arp-scan) 0 packets received by filter, 0 packets dropped by kernel Ending arp-scan 1.9.5: 65536 hosts scanned in 263.530 seconds (248.69 hosts/sec). 0 responded
How can I have Arp detect it?
Edit: it's a whole different problem
I thought it was the
arp-scan problem, but it turns out that netplan didn't apply upon reboot. I ssh-ed to it through WiFi, and that's when I realized it.
this is the Netplan config file for my Pi:
network: version: 2 renderer: networkd ethernets: eth0: dhcp4: no dhcp6: no addresses: [169.254.2.14/16]
Did I do anything wrong?