I upgraded to Ubuntu 18.04 and suddenly I don't have internet on command line, wired nor wireless, some domains seem not to resolve, though
ping 220.127.116.11 does work, but
service networking status is outputting error. I saw many tweaks here on askubuntu regarding the issue, with
/etc/network/interface but none fully works.
sudo service network-manager restart does not work either.
My network is basically a mess. Is there a way to fully reset network settings to a functional one? How is it possible that Ubuntu is releasing a main distro with such a bug, since this is a hot topic around?
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:8c:fa:8a:7c:ba txqueuelen 1000 (Ethernet) RX packets 12829 bytes 5924414 (5.9 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8755 bytes 1396496 (1.3 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 40521 bytes 4309970 (4.3 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 40521 bytes 4309970 (4.3 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.3 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::5e82:7f12:37f8:854f prefixlen 64 scopeid 0x20<link> ether 34:de:1a:7f:93:1a txqueuelen 1000 (Ethernet) RX packets 27441 bytes 22237443 (22.2 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 18332 bytes 5607005 (5.6 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ip addr && cat /etc/resolv.conf && sudo lshw -C Network
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 00:8c:fa:8a:7c:ba brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 34:de:1a:7f:93:1a brd ff:ff:ff:ff:ff:ff inet 192.168.1.3/24 brd 192.168.1.255 scope global dynamic noprefixroute wlan0 valid_lft 84519sec preferred_lft 84519sec inet6 fe80::5e82:7f12:37f8:854f/64 scope link noprefixroute valid_lft forever preferred_lft forever # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN # 127.0.0.53 is the systemd-resolved stub resolver. # run "systemd-resolve --status" to see details about the actual nameservers. nameserver 18.104.22.168 nameserver 127.0.0.53 options edns0 *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 0c serial: 00:8c:fa:8a:7c:ba size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:16 ioport:3000(size=256) memory:c1700000-c1700fff memory:c1400000-c1403fff *-network description: Wireless interface product: Wireless 3160 vendor: Intel Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: wlan0 version: cb serial: 34:de:1a:7f:93:1a width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=4.15.0-45-generic firmware=17.948900127.0 ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11 resources: irq:33 memory:c1600000-c1601fff
# deb cdrom:[Ubuntu 15.10 _Wily Werewolf_ - Release amd64 (20151021)]/ wily main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the deb http://archive.ubuntu.com/ubuntu bionic main universe restricted multiverse ## respective vendors as a service to Ubuntu users. deb http://security.ubuntu.com/ubuntu/ bionic-security universe multiverse restricted main deb http://archive.ubuntu.com/ubuntu bionic-updates universe multiverse restricted main deb http://archive.ubuntu.com/ubuntu bionic-backports universe multiverse restricted main deb http://archive.canonical.com/ubuntu bionic partner # deb-src http://archive.canonical.com/ubuntu bionic partner deb [arch=amd64,i386] https://deb.opera.com/opera-stable/ stable non-free # deb-src [arch=amd64,i386] https://deb.opera.com/opera-stable/ stable non-free