2

What I´ve done so far

$ sudo apt install lm-sensors
$ sudo sensors-detect
: (yes to all)
$ sudo services kmod start
$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
$ reboot
$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
$ sudo sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
$ sudo sensors-detect
: (yes to all until here)
Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `adm1025':
  * Bus `SMBus I801 adapter at e000'
    Busdriver `i2c_i801', I2C address 0x2d
    Chip `adm1025' (confidence: 6)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
adm1025
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)no

Unloading i2c-i801... OK
Unloading cpuid... OK


$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
$ sudo nano /etc/modules
: (manually add driver module)
$ sudo service kmod start
$ sudo service kmod status
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; ven
   Active: active (exited) since Wed 2018-10-31 21:04:56 CDT; 5min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 251 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=
 Main PID: 251 (code=exited, status=0/SUCCESS)

Oct 31 21:04:54 husky-E-4000 systemd-modules-load[251]: Inserted module 'lp'
Oct 31 21:04:56 husky-E-4000 systemd[1]: Started Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomple
$ sudo service kmod stop
$ sudo service kmod start
$ sudo service kmod status
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; ven
   Active: active (exited) since Wed 2018-10-31 21:12:10 CDT; 55s ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 1199 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status
 Main PID: 1199 (code=exited, status=0/SUCCESS)

Oct 31 21:12:10 husky-E-4000 systemd[1]: Starting Load Kernel Modules...
Oct 31 21:12:10 husky-E-4000 systemd[1]: Started Load Kernel Modules.
$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

System Information

Computer

Summary

-Computer-
Processor       : Intel(R) Pentium(R) 4 CPU 2.40GHz
Memory      : 2058MB (580MB used)
Machine Type        : Desktop
Operating System        : Ubuntu 18.04.1 LTS
User Name       : husky (Husky 2490)
Date/Time       : Wed 31 Oct 2018 09:43:29 PM CDT
-Display-
Resolution      : 1024x768 pixels
OpenGL Renderer     : (Unknown)
X11 Vendor      : The X.Org Foundation
-Audio Devices-
Audio Adapter       : ICH4 - Intel 82801DB-ICH4
-Input Devices-
 Sleep Button
 Power Button
 AT Translated Set 2 keyboard
 Logitech USB Optical Mouse
-Printers-
No printers found
-SCSI Disks-
ATA Maxtor 2F040J0
HL-DT-ST RW/DVD GCC-4320B

Operating System

-Version-
Kernel      : Linux 4.15.0-38-generic (i686)
Version     : #41-Ubuntu SMP Wed Oct 10 10:58:23 UTC 2018
C Library       : GNU C Library / (Ubuntu GLIBC 2.27-3ubuntu1) 2.27
Distribution        : Ubuntu 18.04.1 LTS
-Current Session-
Computer Name       : husky-E-4000
User Name       : husky (Husky 2490)
Language        : en_US.UTF-8 (en_US)
Home Directory      : /home/husky
-Misc-
Uptime      : 43 minutes
Load Average        : 0.42, 0.52, 0.54
Available entropy in /dev/random        : 3722 bits (healthy)

This computer is an oldie

0

It looks like your computer uses the i2c-i801 module and this module was blacklisted. However, there was a recent update which removed this module from the blacklist file at /etc/modprobe.d/blacklist.conf. Execute the following commands to fix this issue:

sudo apt update
sudo apt dist-upgrade

Assuming you have made no changes to the /etc/modprobe.d/blacklist.conf you should type Y and then press ENTER when prompted to overwrite the old blacklist file with the new file.

After the upgrade is complete, run the following command to verify this change:

grep i2c-i801 /etc/modprobe.d/blacklist.conf

This command should return nothing.

Reboot or reload your modules and then check the sensors again.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.