4

While I was trying to install Ubuntu to my hard drive (which is an SSD, maybe 2 years old) and it just can't seem to locate the drive as if it doesn't exist. I tried rebooting multiple times, unplugging all the other drives, etc., but nothing seems to help. I'd really like a dual boot as I'm getting sick of Windows.

  • KINGSTON SNV425S264GB
  • Firmware: C091
  • SSD 64GB 110/200 VDTb 2.5 KIN
  • driver version; 5.1.2535.0
[    4.986663] [drm]     DFP3: INTERNAL_UNIPHY 
[    4.986706] [drm]    CRT1: INTERNAL_KLDSCP_DAC1 
[    5.016547] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 
[  5.284075] ata5: SATA link down (SStatus 0 SControl 300) 
[    5.288087] ata6: SATA link down (SStatus 0 SControl 300) 
[    5.463792] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID 
[ 5.515756] firewire_core: created device fw0: GUID 001e8c0000c81348, S400 
[    5.568992] [drm] Radeon display connector HDMI-A-1: Found valid EDID 
[    5.622496] [drm] Radeon display connector DVI-I-1: Found valid EDID 
[    5.622583] [drm] Internal thermal controller with fan control 
[    5.622698] [drm] radeon: power management initialized 
[    5.678152] usbcore: registered new interface driver uas 
[   5.678793] Initializing USB Mass Storage driver... 
[    5.678939] scsi8 : usb-storage 1-1.3:1.0 
[    5.679053] usbcore: registered new interface driver usb-storage 
[    5.679100] USB Mass Storage support registered. 
[    5.747413] usb 1-1.4: new high speed USB device number 4 using ehci_hcd 
[    5.821222] [drm] fb mappable at 0xE0141000 
[   5.821266] [drm] vram apper at 0xE0000000 
[    5.821308] [drm] size 8294400 
[    5.821350] [drm] fb depth is 24 
[    5.821391] [drm]    pitch is 7680 
[    5.821463] fbcon: radeondrmfb (fb0) is primary device 
[    5.849482] scsi9 : usb-storage 1-1.4:1.0 
[    5.919314] usb 1-1.5: new full speed USB device number 5 using ehci_hcd 
[   6.013337] hub 1-1.5:1.0: USB hub found 
[    6.013522] hub 1-1.5:1.0: 3 ports detected 
[    6.083036] usb 1-1.6: new full speed USB device number 6 using ehci_hcd 
[    6.182767] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2 
[    6.182844] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input0 
[    6.184851] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input3 
[    6.185103] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input1 
[    6.187872] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input2 
[    6.187895] usbcore: registered new interface driver usbhid 
[    6.187896] usbhid: USB HID core driver 
[    6.250680] usb 2-1.1: new high speed USB device number 3 using ehci_hcd 
[    6.259316] Console: switching to colour frame buffer device 240x67 
[    6.263262] fb0: radeondrmfb frame buffer device 
[    6.263263] drm: registered panic notifier 
[    6.263298] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0 
[6.630088] usb 2-1.2: new high speed USB device number 4 using ehci_hcd 
[    6.684730] scsi 8:0:0:0: Direct-Access     Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS 
[    6.691228] scsi 8:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS 
[    6.697692] scsi 8:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS 
[    6.704183] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS 
[    6.723704] scsi10 : usb-storage 2-1.2:1.0 
[    6.775943] Btrfs loaded 
[    6.779953] xor: automatically using best checksumming function: generic_sse 
[   6.793807] usb 2-1.3: new low speed USB device number 5 using ehci_hcd 
[    6.797638]    generic_sse: 12807.000 MB/sec 
[    6.797643] xor: using function: generic_sse (12807.000 MB/sec) 
[    6.799018] device-mapper: dm-raid45: initialized v0.2594b 
[    6.897689] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4 
[    6.897764] generic-usb 0003:046D:C508.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0 
[  6.969663] usb 2-1.4: new high speed USB device number 6 using ehci_hcd 
[    7.063246] scsi11 : usb-storage 2-1.4:1.0 
[    7.121527] sd 8:0:0:0: Attached scsi generic sg1 type 0 
[    7.121619] sd 8:0:0:1: Attached scsi generic sg2 type 0 
[    7.121806] sd 8:0:0:2: Attached scsi generic sg3 type 0 
[    7.121934] sd 8:0:0:3: Attached scsi generic sg4 type 0 
[    7.137287] usb 2-1.5: new high speed USB device number 7 using ehci_hcd 
[    7.143640] sd 8:0:0:1: [sdb] Attached SCSI removable disk 
[    7.146229] sd 8:0:0:2: [sdc] Attached SCSI removable disk 
[    7.147380] sd 8:0:0:3: [sdd] Attached SCSI removable disk 
[    7.152561] sd 8:0:0:0: [sda] Attached SCSI removable disk 
[    7.235935] scsi12 : usb-storage 2-1.5:1.0 
[   7.309004] usb 2-1.7: new low speed USB device number 8 using ehci_hcd 
[    7.412950] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input5 
[    7.413019] logitech 0003:046D:C517.0005: input,hidraw4: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0 
[    7.418375] logitech 0003:046D:C517.0006: fixing up Logitech keyboard report descriptor 
[    7.418716] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input6 
[    7.418826] logitech 0003:046D:C517.0006: input,hiddev0,hidraw5: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1 
[    7.480908] usb 2-1.8: new high speed USB device number 9 using ehci_hcd 
[    7.590643] scsi13 : usb-storage 2-1.8:1.0 
[    7.660568] usb 1-1.5.1: new full speed USB device number 7 using ehci_hcd 
[    7.754942] scsi 10:0:0:0: Direct-Access     WDC WD10 TPVT-00U4RT1     01.0 PQ: 0 ANSI: 2 CCS 
[    7.756787] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input7 
[    7.756865] generic-usb 0003:0A5C:4502.0007: input,hidraw6: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.0-1.5.1/input0 
[   7.836358] usb 1-1.5.2: new full speed USB device number 8 using ehci_hcd 
[    7.934097] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input8 
[    7.934177] generic-usb 0003:0A5C:4503.0008: input,hidraw7: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.0-1.5.2/input0 
[   8.008059] usb 1-1.5.3: new full speed USB device number 9 using ehci_hcd 
[    8.061332] scsi 11:0:0:0: Direct-Access     WD       My Passport 070B 1032 PQ: 0 ANSI: 4 
[    8.062290] scsi 11:0:0:1: Enclosure         WD       SES Device       1032 PQ: 0 ANSI: 4 
[   8.236813] scsi 12:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS 
[    8.592581] scsi 13:0:0:0: Direct-Access     Iomega E xternal HD       0000 PQ: 0 ANSI: 4 
[    8.882015] scsi 9:0:0:0: Direct-Access     SAMSUNG  HM641JI               PQ: 0 ANSI: 2 CCS 
[    8.910861] sd 9:0:0:0: Attached scsi generic sg5 type 0 
[   8.911069] sd 10:0:0:0: Attached scsi generic sg6 type 0 
[    8.911196] sd 11:0:0:0: Attached scsi generic sg7 type 0 
[    8.911352] scsi 11:0:0:1: Attached scsi generic sg8 type 13 
[    8.911591] sd 12:0:0:0: Attached scsi generic sg9 type 0 
[    8.911852] sd 11:0:0:0: [sdg] 975400960 512-byte logical blocks: (499 GB/465 GiB) 
[   8.911860] sd 13:0:0:0: Attached scsi generic sg10 type 0 
[    8.912718] sd 13:0:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB) 
[    8.912722] sd 12:0:0:0: [sdh] 31375360 512-byte logical blocks: (16.0 GB/14.9 GiB) 
[    8.913418] sd 12:0:0:0: [sdh] Write Protect is off 
[    8.913422] sd 12:0:0:0: [sdh] Mode Sense: 23 00 00 00 
[    8.913594] sd 11:0:0:0: [sdg] Write Protect is off 
[   8.913598] sd 11:0:0:0: [sdg] Mode Sense: 23 00 10 00 
[    8.913718] sd 10:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) 
[    8.913964] sd 12:0:0:0: [sdh] No Caching mode page present 
[   8.913966] sd 12:0:0:0: [sdh] Assuming drive cache: write through 
[    8.914586] sd 10:0:0:0: [sdf] Write Protect is off 
[    8.914590] sd 10:0:0:0: [sdf] Mode Sense: 28 00 00 00 
[    8.915335] sd 10:0:0:0: [sdf] No Caching mode page present 
[    8.915337] sd 10:0:0:0: [sdf] Assuming drive cache: write through 
[    8.915463] sd 11:0:0:0: [sdg] No Caching mode page present 
[    8.915465] sd 11:0:0:0: [sdg] Assuming drive cache: write through 
[    8.917470] sd 10:0:0:0: [sdf] No Caching mode page present 
[    8.917475] sd 10:0:0:0: [sdf] Assuming drive cache: write through 
[    8.919147] sd 13:0:0:0: [sdi] Write Protect is off 
[    8.919150] sd 13:0:0:0: [sdi] Mode Sense: 38 00 00 00 
[    8.919603] sd 11:0:0:0: [sdg] No Caching mode page present 
[    8.919608] sd 11:0:0:0: [sdg] Assuming drive cache: write through 
[    8.920274]  sdg: sdg1 
[    8.925532] sd 13:0:0:0: [sdi] No Caching mode page present 
[    8.925538] sd 13:0:0:0: [sdi] Assuming drive cache: write through 
[    8.927768] sd 11:0:0:0: [sdg] No Caching mode page present 
[    8.927774] sd 11:0:0:0: [sdg] Assuming drive cache: write through 
[    8.927779] sd 11:0:0:0: [sdg] Attached SCSI disk 
[    8.939473] sd 13:0:0:0: [sdi] No Caching mode page present 
[    8.939479] sd 13:0:0:0: [sdi] Assuming drive cache: write through 
[    8.959174]  sdi: sdi1 
[    8.983309] sd 13:0:0:0: [sdi] No Caching mode page present 
[    8.983315] sd 13:0:0:0: [sdi] Assuming drive cache: write through 
[    8.983320] sd 13:0:0:0: [sdi] Attached SCSI disk 
[    9.212316]  sdf: sdf1 
[    9.230266] sd 10:0:0:0: [sdf] No Caching mode page present 
[    9.230268] sd 10:0:0:0: [sdf] Assuming drive cache: write through 
[    9.230270] sd 10:0:0:0: [sdf] Attached SCSI disk 
[   11.610888] sd 9:0:0:0: [sde] 1250263728 512-byte logical blocks: (640 GB/596 GiB) 
[   11.611755] sd 9:0:0:0: [sde] Write Protect is off 
[   11.611772] sd 9:0:0:0: [sde] Mode Sense: 28 00 00 00 
[   11.612565] sd 9:0:0:0: [sde] No Caching mode page present 
[   11.612581] sd 9:0:0:0: [sde] Assuming drive cache: write through 
[   11.615198] sd 9:0:0:0: [sde] No Caching mode page present 
[   11.615215] sd 9:0:0:0: [sde] Assuming drive cache: write through 
[   11.615786]  sde: sde1 
[   11.640438] sd 9:0:0:0: [sde] No Caching mode page present 
[   11.640462] sd 9:0:0:0: [sde] Assuming drive cache: write through 
[   11.640484] sd 9:0:0:0: [sde] Attached SCSI disk 
[   11.914038] sd 12:0:0:0: [sdh] No Caching mode page present 
[   11.914062] sd 12:0:0:0: [sdh] Assuming drive cache: write through 
[   11.914663]  sdh: 
[   11.916917] sd 12:0:0:0: [sdh] No Caching mode page present 
[   11.916946] sd 12:0:0:0: [sdh] Assuming drive cache: write through 
[   11.916974] sd 12:0:0:0: [sdh] Attached SCSI removable disk 
[   11.917312] ses 11:0:0:1: Attached Enclosure device 
[   14.221690] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
[   21.855658] udevd[1656]: starting version 173 
[  21.991038] Bluetooth: Core ver 2.16 
[   21.991056] NET: Registered protocol family 31 
[   21.991058] Bluetooth: HCI device and connection manager initialized 
[   21.991060] Bluetooth: HCI socket layer initialized 
[   21.991061] Bluetooth: L2CAP socket layer initialized 
[21.991894] Bluetooth: SCO socket layer initialized 
[   22.051657] cfg80211: Calling CRDA to update world regulatory domain 
[  22.073893] ATK0110 ATK0110:00: EC enabled 
[   22.076965] Bluetooth: Generic Bluetooth USB driver ver 0.6 
[   22.077088] usbcore: registered new interface driver btusb 
[   22.138897] EDAC MC: Ver:2.1.0 
[   22.160301] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 
[   22.160319] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) 
[   22.160322] EDAC i7core: Driver loaded. 
[  22.208906] Linux video capture interface: v2.00 
[   22.236678] uvcvideo: Found UVC 1.00 device  (046d:081b) 
[   22.251510] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9 
[   22.251622] usbcore: registered new interface driver uvcvideo 
[  22.251624] USB Video Class driver (v1.1.0) 
[   22.325240] cfg80211: World regulatory domain updated: 
[   22.325242] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[  22.325244] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[   22.325246] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[   22.325248] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[  22.325249] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[   22.325251] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[   22.363308] IR NEC protocol handler initialized 
[   22.377463] saa7130/34: v4l2 driver version0.2.16 loaded 
[   22.377513] saa7134 0000:0c:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[   22.377518] saa7133[0]: found at 0000:0c:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800 
[  22.377524] saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected] 
[   22.377547] saa7133[0]: board init: gpio is 0 
[   22.386031] IR RC5(x) protocol handler initialized 
[   22.400233] IR RC6 protocol handler initialized 
[   22.423367] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 
[  22.423412] HDA Intel 0000:00:1b.0: irq 61 for MSI/MSI-X 
[   22.423432] HDA Intel 0000:00:1b.0: setting latency timer to 64 
[   22.424177] IR JVC protocol handler initialized 
[   22.427738] IR Sony protocol handler initialized 
[   22.456473] lirc_dev: IR Remote Control driver registered, major 249  
[   22.465289] IR LIRC bridge handler initialized 
[   22.477705] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 
[   22.477827] HDA Intel 0000:01:00.1: irq 62 for MSI/MSI-X 
[   22.477847] HDA Intel 0000:01:00.1: setting latency timer to 64 
[   22.503770] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0 
[   22.503847] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input10 
[  22.528561] saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 
[   22.528567] saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff 
[   22.528572] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 88 ff ff ff ff 
[  22.528578] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528583] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff 
[   22.528588] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[  22.528593] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528598] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528603] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[  22.528608] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528613] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528618] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[  22.528623] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528628] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528633] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[  22.528638] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
[   22.528645] saa7133[0]: P7131 analog only, using entry of ASUSTeK P7131 Analog 
[   22.580475] Registered IR keymap rc-asus-pc39 
[   22.580538] input: saa7134 IR (ASUSTeK P7131 Analo as /devices/pci0000:00/0000:00:1e.0/0000:0c:01.0/rc/rc0/input11 
[  22.580580] rc0: saa7134 IR (ASUSTeK P7131 Analo as /devices/pci0000:00/0000:00:1e.0/0000:0c:01.0/rc/rc0 
[   22.580675] rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at minor = 0 
[   22.591564] i2c-core: driver [tuner] using legacy suspend method 
[ 22.591566] i2c-core: driver [tuner] using legacy resume method 
[   22.644511] tuner 9-004b: Tuner -1 found with type(s) Radio TV. 
[   22.739986] init: failsafe main process (2041) killed by TERM signal 
[   22.740309] init: alsa-restore main process (2339) terminated with status 99 
[   22.744161] tda829x 9-004b: setting tuner address to 61 
[22.750445] r8169 0000:05:00.0: eth0: link down 
[   22.751189] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[   22.803523] r8169 0000:04:00.0: eth1: link down 
[   22.803529] r8169 0000:04:00.0: eth1: link down 
[   22.804362] ADDRCONF(NETDEV_UP): eth1: link is not ready 
[   22.820043] tda829x 9-004b: type set to tda8290+75a 
[   22.908087] Bluetooth: RFCOMM TTY layer initialized 
[   22.908092] Bluetooth: RFCOMM socket layer initialized 
[   22.908093] Bluetooth: RFCOMM ver1.11 
[   22.914275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
[   22.914278] Bluetooth: BNEP filters: protocol multicast 
[   23.407602] 3:3:1: cannot set freq 16000 to ep 0x86 
[   23.555851] usbcore: registered new interface driver snd-usb-audio 
[   24.456867] r8169 0000:04:00.0: eth1: link up 
[   24.457387] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready 
[   26.610335] saa7133[0]: registered device video1 [v4l2] 
[   26.610382] saa7133[0]: registered device vbi0 
[  26.610412] saa7133[0]: registered device radio0 
[   26.610580] ath9k 0000:0c:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 
[  26.619689] saa7134 ALSA driver for DMA sound loaded 
[   26.619706] saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -2 
[   27.465622] 3:3:4: cannot set freq 48000 to ep 0x86 
[   27.470360] 3:3:4: cannot set freq 48000 to ep 0x86 
[   28.170129] ath: EEPROM regdomain: 0x809c 
[   28.170131] ath: EEPROM indicates we should expect a country code 
[   28.170132] ath: doing EEPROM country->regdmn map search 
[   28.170133] ath: country maps to regdmn code: 0x52 
[  28.170134] ath: Country alpha2 being used: CN 
[   28.170135] ath: Regpair used: 0x52 
[   28.170138] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: 
[ 28.170140] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170141] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170143] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[  28.170144] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170146] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170148] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170149] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170151] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170153] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170154] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170156] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170157] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170159] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170160] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170162] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170164] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170165] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170167] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170169] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170170] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: 
[   28.170172] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.170173] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel 
[   28.170175] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel 
[  28.170176] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel 
[   28.172672] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172674] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172677] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172679] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172681] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172684] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172685] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172688] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172690] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172693] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172694] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172697] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172698] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172700] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172701] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172703] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172705] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172706] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172708] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172710] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172711] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172713] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172714] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172716] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172717] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172719] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.172721] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: 
[   28.172723] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm) 
[   28.181814] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' 
[   28.182313] cfg80211: Calling CRDA for country: CN 
[   28.182369] Registered led device: ath9k-phy0 
[   28.182373] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90001b20000, irq=17 
[   28.184804] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: 
[   28.184807] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.184809] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: 
[   28.184812] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.184814] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: 
[   28.184816] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.184818] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: 
[   28.184821] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm) 
[   28.184823] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: 
[   28.184825] cfg80211: 2402000 KHz - 2482000 KHz @  KHz)- 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) 
[   28.184871] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) 
[  28.237872] ADDRCONF(NETDEV_UP): wlan0: link is not ready 
[   28.347718] lp: driver loaded but no devices found 
[   28.366220] ppdev: user-space parallel port driver 
[   28.467369] 3:3:4: cannot set freq 48000 to ep 0x86 
[   29.469668] 3:3:4: cannot set freq 48000 to ep 0x86 
[   29.728231] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 
[   30.468086] 3:3:4: cannot set freq 48000 to ep 0x86 
[   31.467038] 3:3:4: cannot set freq 48000 to ep 0x86 
[  32.464915] 3:3:4: cannot set freq 48000 to ep 0x86 
[   33.463344] 3:3:4: cannot set freq 48000 to ep 0x86 
[   34.461643] 3:3:4: cannot set freq 48000 to ep 0x86 
[   34.777120] eth1: no IPv6 routers present 
[   35.460069] 3:3:4: cannot set freq 48000 to ep 0x86 
[   36.458651] 3:3:4: cannot set freq 48000 to ep 0x86 
[   37.456851] 3:3:4: cannot set freq 48000 to ep 0x86 
[   38.455273] 3:3:4: cannot set freq 48000 to ep 0x86 
[   39.453753] 3:3:4: cannot set freq 48000 to ep 0x86 
[  40.452140] 3:3:4: cannot set freq 48000 to ep 0x86 
[   41.450457] 3:3:4: cannot set freq 48000 to ep 0x86 
[   42.449083] 3:3:4: cannot set freq 48000 to ep 0x86 
[   43.447342] 3:3:4: cannot set freq 48000 to ep 0x86 
[   44.445676] 3:3:4: cannot set freq 48000 to ep 0x86 
[  44.587162] JFS: nTxBlock = 8192, nTxLock = 65536 
[   44.632652] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled 
[   44.633366] SGI XFS Quota Management subsystem 
[   45.444276] 3:3:4: cannot set freq 48000 to ep 0x86 
[ 101.004203] NTFS driver 2.1.30 [Flags: R/O MODULE]. 
[  101.035285] QNX4 filesystem 0.2.3 registered. 
[  289.523592] CE: hpet increased min_delta_ns to 20113 nsec 
[  647.448669] usb 2-1.8: USB disconnect, device number 9 
[  648.982277] usb 2-1.7: USB disconnect, device number 8 
[  657.672724] usb 2-1.3: USB disconnect, device number 5 
[ 658.686681] r8169 0000:04:00.0: eth1: link down 
[  658.695127] usb 2-1.4: USB disconnect, device number 6 
[  660.947609] r8169 0000:04:00.0: eth1: link up 
[  662.529012] usb 2-1.2: USB disconnect, device number 4 
[  664.660117] r8169 0000:04:00.0: eth1: link down 
[ 666.223675] r8169 0000:04:00.0: eth1: link up 
[  768.544851] usb 2-1.7: new low speed USB device number 10 using ehci_hcd 
[ 768.645799] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input12 
[  768.645934] logitech 0003:046D:C517.0009: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0 
[  768.651054] logitech 0003:046D:C517.000A: fixing up Logitech keyboard report descriptor 
[  768.651724] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input13 
[  768.651935] logitech 0003:046D:C517.000A: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1 
[  773.788397] usb 2-1.1: reset high speed USB device number 3 using ehci_hcd 
[  774.102287] snd-usb-audio 2-1.1:1.2: no reset_resume for driver snd-usb-audio? 
[  774.102293] snd-usb-audio 2-1.1:1.3: no reset_resume for driver snd-usb-audio?
2
  • i checked again, and my other internal drive (regular hard drive 1TB samsung) couldn't be found either, could it be the drivers of the sata controller on my motherboard?
    – Petr
    Mar 1, 2012 at 22:55
  • 64 Gigabytes is a bit small for a good dual-boot. I recommend using at least a 240GB SSD (I'm using 480GB). And if there is less than 10GB room left over, it may not even accept Lubuntu.
    – Irsu85
    Sep 17, 2020 at 11:11

1 Answer 1

2

Apparently the problem had something to do with the hardware of my motherboard, it uses a marvell adapter for an addition 3 sata ports. The devices that were plugged into these ports weren't found by ubuntu, once i plugged them into the normal sata ports provided on my motherboard the devices were found. Thanks for all the help anyways.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .