1

I bought a new laptop that comes with Windows 10. When I get to Installation Type it gives me this:

no types listed

fdisk only sees my USB drive.

fdisk output in terminal

Windows disk management looks like this:

Windows disk management with ESP, 2 primary partitions, recovery partition and 220GB unallocated, third partition left to right

I have successfully installed Ubuntu on 3 other machines using this boot drive before.

I noticed it doesn't let me choose Install alongside Windows. Not sure if it's supposed to be after Installation Type.

Gparted looks like this:

gparted apparently showing only USB

  • Almost always Windows fast startup needs to be off. askubuntu.com/questions/843153/… & askubuntu.com/questions/145902/… And Windows updates turn it back on, so if issue in future, first then to check. Could be a few other issues. If very new computer, better to use 18.04. What model Lenovo? Have you updated UEFI from Lenovo, required for all systems, Both Windows & Linux have fixed kernels, but UEFI also must be updated for Meltdown and Spectre CPU vulnerabilities. – oldfred May 28 '18 at 18:45
  • Your configuration consists of a 30G SSD and a 500G HDD. The SSD was probably configured as a fast cache for the HDD. You currently have the SSD configured for Ubuntu. You'll have to break the two apart to install Ubuntu on the HDD. You'll have to check your BIOS to see if the disk subsystem is set for RAID, or something else. – heynnema May 28 '18 at 18:47
  • @oldfred Thank you for fast response. It's Lenovo ideapad 720S-14IKB. In my power settings there's no option to check or uncheck fast startup. I don't know how to update UEFI from Lenovo. In system info it says BIOS Mode: UEFI, not sure if this is related. – Dopey NULL May 28 '18 at 19:07
  • @heynnema Hello. "You currently have the SSD configured for Ubuntu". How did you get this conclusion and what does it mean? It seems like the ubuntu installation can't see the partition table. Again I know nothing about this so sorry if the question is dumb. Thanks for your help. – Dopey NULL May 28 '18 at 19:10
  • You have an UEFI system as you have ESP as first partition. Many vendors call UEFI as BIOS, but UEFI is replacement for BIOS. Every vendor is different on updating, check you manual for your model. Most update from Windows. Many also update from UEFI, if update file on FAT32 partition either in ESP or on flash drive (UEFI can only read FAT32 directly). Some also have you create a DOS bootable flash drive for update.if nVidia, you also need nomodeset boot parameter. See UEFI section: askubuntu.com/questions/162075/… – oldfred May 28 '18 at 19:29
2

Your BIOS is set to RAID for the disk subsystem, and the Ubuntu installer doesn't know what to do with that. You need to change it to AHCI. Here are two ways to do it. Windows will not need to be reinstalled if you follow one of these methods.

Some folks have found the 2nd choice that I provide easier to do...

Make sure to have a backup of your important Windows files, as data loss is always a possibility!

You've got a single disk set up in RAID mode, and the Ubuntu installer won't recognize your partitions until you switch your disk setting in the BIOS from RAID to AHCI.

Making that switch comes with some problems though, as Windows will no longer boot.

Choice #1: Looking at this article https://samnicholls.net/2016/01/14/how-to-switch-sata-raid-to-ahci-windows-10-xps-13/ will show you how to make the change without having to reinstall Windows.

  • Boot to Windows with your current SATA controller configuration
  • Open Device Manager
  • Expand Storage Controllers and identify the Intel SATA RAID Controller
  • View properties of the identified controller
  • On the Driver tab, click the Update driver… button
  • Browse my computer…, Let me pick…
  • Uncheck Show compatible hardware
  • Select Microsoft as manufacturer
  • Select Microsoft Storage Spaces Controller as model3 (this choice may be outdated by now).
  • Accept that Windows cannot confirm that this driver is compatible
  • Save changes, reboot to BIOS and change RAID SATA Controller to AHCI
  • Save changes and reboot normally, hopefully to Windows

Now you should be able to install Ubuntu in a dual-boot configuration.

Choice #2: See http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-operation/

  • Right-click the Windows Start Menu. Choose Command Prompt (Admin).
  • If you don’t see Command Prompt listed, it’s because you have already been updated to a later version of Windows. If so, use this method instead to get to the Command Prompt:
  • Click the Start Button and type cmd
  • Right-click the result and select Run as administrator
  • Type this command and press ENTER: bcdedit /set {current} safeboot minimal
  • If this command does not work for you, try bcdedit /set safeboot minimal
  • Restart the computer and enter BIOS Setup (the key to press varies between systems).
  • Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
  • Save changes and exit Setup and Windows will automatically boot to Safe Mode.
  • Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
  • Type this command and press ENTER: bcdedit /deletevalue {current} safeboot
  • If you had to try the alternate command above, you will likely need to do so here also: bcdedit /deletevalue safeboot
  • Reboot once more and Windows will automatically start with AHCI drivers enabled.
  • Thank you so much! Finally worked. Just curious, will the changes affect future usb storage drive usage in anyway? – Dopey NULL May 29 '18 at 0:49
  • @DopeyNULL shouldn't have any effect on USB storage. – heynnema May 29 '18 at 3:27
  • Option #2 worked well for me: flex-5-1570. – edencorbin Nov 7 '18 at 6:23

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.