I have seen many videos that make Ubuntu faster, but these methods only make desktop performance faster.
I am looking to make my computer boot faster. Is their anything I can do to make Ubuntu boot significantly faster?
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It only takes a minute to sign up.Sign up to join this community
Generally, the less programs you have loading on bootup, the faster your system should be. Try BUM (from software center) to disable some unneeded services, and also ensure you don't have any unnecessary programs installed that will be loaded when booting. Finally, using a solid state drive (SSD) as your boot device should significantly improve bootime.
Oh one more thing, your filesystem type makes a difference as well. EXT4 has suffered some performance regressions (according to phoronix) but I've still found EXT4 to be great for booting fast.
Improving boot time is highly related with disabling/managing service, but the current answers lack details in disabling services which uses
In short, systemd is a system and service manager for Linux, compatible with SysV and LSB init scripts. More about this can be read from official project page.
Use the following command to check which service takes most of time
If you want to disable auto-starting of services during boot you can use the following command
sudo systemctl disable some-time-eater-service.service --now
However, you might want to see which other services needs the service in question. To check use the following command
systemctl list-dependencies some-time-eater-service.service --reverse
some-time-eater-service.service with actual service name like
Note that, disabling auto-start doesn't make a service non-startable. The service can be started after boot when requirement arises. If you want to completely disable it, read the next section
If you want to completely disable a service so that it can't be started, you should use
mask instead of disable. Like this
sudo systemctl mask <SERVICE-NAME>
<SERVICE-NAME> with actual name of a service
The difference between
disable is mask make a service completely disable, you can't start it. You must
unmask to start it with systemd (you can still start with
disable simply disable auto-start of a service, you can start it later.
For example, After masking my
email@example.com service, when I wanted to start it with
systemctl the following message is shown
Failed to start firstname.lastname@example.org: Unit email@example.com is masked.
One GUI Tool I particularly find interesting is
systemd-manager, it is still in development stage and hasn't been made it's path to Official Ubuntu repository. However, you can install it very easily from Systemd-Manager's github page. The releases contain a .deb package, which is very easy to install. You need GTK-3.16 or higher though.
Once you download and install, you can start it with
systemd-manager command. Start it.
The application has two main view. One is Systemd Units and other one is Systemd Analyze. You can switch it with the label in top-left corner. See the screenshot.
And There are three types of units you can manage. Servcies, Sockets and Timers. You can switch between them. See the screenshot.
The three main tabs are Files, Journal, Dependencies.
There are two columns beside the name of units to indicate the Status. Left one indicates whether that unit is enabled to start at boot and the right one indicates whether that unit is currently running. See them in picture.
To toogle enabled-at-boot or running status, there are two toogle buttons at the top-right corner. Enabled means the units will start and boot. See them in picture.
The complete view of the application is shown below
Hope this will help. I get benefited from other answers about systemd, but really needed to gather the information in one Place.
To know more about
systemd you can visit these links:
Other answers have different suggestions. Including buying SSD, increasing RAM etc. If you can afford, those will definitely help, particularly the SSD suggestion.
I just ran across this the other day. Its "e4rat" Instructions Here
This little app is amazing.
I took an overtired single processor AMD sempron running at 2800+ which normaly boots Natty at 1.45 mins to 27.885 secs.
I have the boot-charts to prove it. Its crazy!
I assume you're talking about Ubuntu 11.04? I have been trying this for a pretty long time now without much success. These steps made a few seconds difference:
Removing unneeded packages
sudo apt-get purge brltty brltty-x11 foo2zjs min12xxw ttf-indic-fonts-core ttf-kacst-one ttf-khmeros-core ttf-lao ttf-punjabi-fonts ttf-unfonts-core
Using both cores/CPUs during the boot process
ONLY DO THIS IF YOU ARE SURE YOUR COMPUTER HAS MULTIPLE CPUs / CORES!
/etc/init.d/rc (you'll need root privileges) and replace
CONCURRENCY=shell. Then save the file.
Update: "CONCURRENCY=shell is now obsolete and is aliased to 'makefile'. Since 2010-05-14 the default has been 'makefile'."* ~Jonathon
Disabling unneeded daemons
This is a bit more advanced, so best not to do it if you don't know what this means.
bum, and start it with root privileges. Then just untick the boxes in front of the daemons you are sure you don't need. For instance, when you don't have a scanner, you can disable
saned. And if you never use bluetooth, you can disable
bluetooth as well.
When you're done, click the Apply button and click either yes or no (it doesn't matter much).
After completing these steps, reboot twice. For some reason the first reboot after changing all these options takes much longer than the other ones, but you should notice some difference during the second reboot.
Use bootchart to produce detailed graphs of what takes time during boot. It might help in deciding what to tweak or remove. From https://wiki.ubuntu.com/BootCharting :
For anybody else struggling with this, just install BUM and start it s a root user (be careful to use gksudo instead of normal sudo). Then un-check the service you want to disable (I disabled Apache2, PostGreSQL daemon, MySQL, virtual box et al) and that is it! You can delete the service completely if you don't want it it there but disabling it is more than enough.
sudo apt-get install bum
Try editing the "/etc/default/grub" file, like most blogs are pointing at. You probably know that one. First adding word "profile", then rebooting, then removing "profile" then rebooting again... it really does improve boot speed. Here is one example: http://lgjsheron.wordpress.com/2010/07/06/how-to-speed-up-boot-of-ubuntu-10-04-lucid-lynx/
Edit 25.10.2016: If you are not going to use hibernation because you can't or you prefer suspend/S3 then you can disable it in Grub by adding
/etc/default/grub and run
update-grub. Here is an example on a Chromebook N22 running GalliumOS:
livewire@zc01:~$ systemd-analyze Startup finished in 8.580s (kernel) + 4.160s (userspace) = 12.740s livewire@zc01:~$ systemd-analyze Startup finished in 3.595s (kernel) + 4.254s (userspace) = 7.850s
I found this because I was curious about the "Running scripts local-premount" part during boot and investigated a bit in initramfs which led me to this option which I previously only used when my system couldn't wake up from hibernation.
Edit 06.08.2016: You should update to a recent version of your Linux distribution that comes with systemd.
I have to say 32 seconds is actually good enough. It won't get much faster with traditional hardware. My new Lenovo T530 takes the same amount of time to boot in legacy mode. With the new micro SSD I recently installed and Ubuntu in UEFI mode it is down to 15 seconds from pressing the power button to login. It still feels like it is wasting 5 seconds during post, but it is absolutely not wasting time starting the actual operating system. The micro SSD has transfer speeds of 280 MB/s, may be a 500 MB/s SSD might make it to 7 seconds. But it is really up to manufacturers to reduce pre OS boot time (POST and what not).
Regarding boot profiling and shell concurrency. Those information can be seen as dated or eventually myth. I remember that automatic boot profiling or something that made boot profiling absolutely superfluous was added to Linux or the core system years ago, since then I didn't used boot profiling anymore after a new kernel package was installed. The shell concurrency setting was said to break things, but with Systemd and Upstart it should be superfluous too, and should have no positive effect.
Garbagecollector is right. Proceed with caution. But some of the programs you can safely disable are email popping utilities such as Evolution, especially if you are not using Evolution at first. Also, anything related to printing can be disabled if you do not print at all. Same for Wireless if you are wired.