5

In Ubuntu 16.04 VPS with LEMP in DigitalOcean I have a WordPress web site that has a contact form I created with Contact Form 7 (CF7).

My problem

I have a problem transferring emails from my WordPress contact form (CF7) to my email (Gmail).

I must say, I'll humbly prefer a non-plugin solution.

DNS zone for my machine

  1. A record holding the domain.
  2. Cname record holding a www. variant for the domain.
  3. Three NS records to associate DNS requests to my domain, with my IP and the relevant app in its machine.

I did try to add MX records, by the automatic DigitalOcean way of doing so (by clicking Add Gmail MX records button in the DigitalOcean DNS management tool), and 5 MX records were added but I still had the same error after I immediately tried to send a test email from WordPress (see error below).

Currently, the DNS zone has no MX records because I'm not sure they are even required if all I desire in the context of emails is just to send WordPress contact form inquiries to my Gmail account and I'm still in the same state with the same error.

Exact error and debug tries:

I always get the following error message, inside a a red box under the contact form:

Failed to send your message.

Due to this error, nothing is sent anywhere (not even to the Spam folder).

Trying to debug this, I ran the following code to create a log for Postfix:

touch /var/log/mail.log
  • There are no errors in the Nginx logs.

The permissions are:

rw-r--r-- 1 root root

But nothing gets written in this error log after I try to send myself a test email and fail.

Reproducing my problem:

  1. Create a DigitalOcean Ubuntu 16.04 droplet.
  2. Create a LEMP stack and run a WordPress website on it.
  3. sudo apt-get update && sudo apt-get upgrade postfix.
  4. Choose "internet-site" configuration.
  5. Type the domain of the site you work with.
  6. Install Contact Form 7 on your WordPress site and try to send yourself a test email.

My question

What causes this problem?

Maybe I can try something with Postfix or an alternative tool I should use like sSMTP? I'd prefer a minimal to no-conf tool. I emphasize that I don't send any other emails to my Gmail besides those landing in the WordPress contact form, nor do I send no other emails anywhere, from this machine.

In the past, I installed Postfix as described above and there weren't any problems. If you have any idea what to check, what details I should provide, please tell me and I'll edit.


Update

1) The file /etc/postfix/main.cf is all default.

2) Output of ps -efl | grep postfix:

5 S root      4611     1  0  80   0 - 16352 ep_pol 07:42 ?        00:00:00 /usr/lib/postfix/sbin/master -w
4 S postfix   4613  4611  0  80   0 - 16881 ep_pol 07:42 ?        00:00:00 qmgr -l -t unix -u
4 S postfix   4930  4611  0  80   0 - 16869 ep_pol 11:02 ?        00:00:00 pickup -l -t unix -u -c
0 S root      5201  5187  0  80   0 -  3236 pipe_w 12:19 pts/0    00:00:00 grep --color=auto postfix
2
  • @JohnDoea I wasn't sure if permissions were at root of logging problem as my log file was automatically setup by smtp or another pacakage. Hopefully the answer below (no matter which option you choose) will solve the big picture problem. Just delete the mail.log file you created before installing package(s). Mar 11, 2018 at 18:12
  • Make sure you have this in your nginx config for the PHP side of things wherever you pass things back to the PHP-FPM backend: fastcgi_intercept_errors on; This will intercept errors and show them on the NGINX error logs.
    – Thomas Ward
    Mar 12, 2018 at 13:39

2 Answers 2

2

The problem seems to come from WordPress, form the configuration of the contact form in particular, as the problem also happened with sSMTP which some consider a simpler tool than Postfix:

When I deleted the original form and created a new one, I got a green message saying that the message was sent in a test email.

Here also, I didn't get a message even to the Spam dir, but at least the response was different and the original problem had nothing to do with Postfix.

1
+300

From How to fix wordpress contact form not sending email with smtp:

Why WordPress Doesn’t Send Emails

WordPress uses the PHP mail function to send emails generated by WordPress or any contact plugin like WPForms. However, many WordPress hosting servers are not configured to use the mail function.

Additionally, in order to reduce spam, your email provider often checks whether your email is originating from the location it claims to be originating from. For example, if your email server is yahoo.com but your email claims to be sent from your website’s domain, chances are your form notification will be blocked before it even reaches the spam folder.

This is why we recommend using SMTP to send emails from WordPress instead of using the default PHP mail function.

SMTP (Simple Mail Transfer Protocol) is an industry standard way to send emails that use the proper authentication method to ensure email deliverability.


Seven different ways to Sunday

This section heading is because today is Sunday and the article How to fix wordpress contact form not sending email with smtp lists Seven different ways to setup SMTP:

  1. WP Mail SMTP: SMTP Setup
  2. Gmail or G Suite
  3. SendGrid
  4. Mailgun
  5. Postmark
  6. WP SES
  7. SparkPost

SMTP Setup

For myself I'm using the most simplest method to have cron email me error messages and daily backup reports: Backup Linux configuration, scripts and documents to Gmail.

To summarize the steps:

sudo apt install ssmtp
sudo apt install sharutils

You also need to instruct gmail to allow less secure access to yourself in order to accept emails. It's documented in my answer above.

Your configuration file for ssmtp MUST be changed. Here is mine:

$ sudo cat /etc/ssmtp/ssmtp.conf
#
# Config file for sSMTP sendmail
#
# The person who gets all mail for userids < 1000
# Make this empty to disable rewriting.

# November 17, 2017.
# Required for cron to e-mail backups as per Ask Ubuntu answer:
# https://askubuntu.com/questions/917562/backup-linux-configuration-scripts-and-documents-to-gmail/922493#922493

#root=postmaster
[email protected]

# The place where the mail goes. The actual machine name is required no 
# MX records are consulted. Commonly mailhosts are named mail.domain.com
#mailhub=mail
mailhub=smtp.gmail.com:587

[email protected]
AuthPass=WinEunuuchs2UnixPassword
UseTLS=YES
UseSTARTTLS=YES
#Debug=YES

# Where will the mail seem to come from?
#rewriteDomain=
rewriteDomain=gmail.com

# The full hostname
hostname=alien

# Are users allowed to set their own From: address?
# YES - Allow the user to specify their own From: address
# NO - Use the system generated From: address
FromLineOverride=YES

Change the above lines to your gmail account name, password and machine name:

[email protected]
[email protected]
AuthPass=WinEunuuchs2UnixPassword
hostname=alien

Note that WinEunuuchs2UnixPassword is your gmail password not your Linux password. To get your hostname use echo $HOSTNAME.

Follow the links in WordPress article.

The links in the WordPress article in the first link above should be followed to setup gmail. Only refer to my link for basic overview.

3
  • Addressing your first comment, In Seven Ways to Sunday, #2 uses G Suite these instructions describe how to setup MX records using G Suite. That said, I'm hoping Option #1 being the simplest solution means MX records, as you imply, won't be needed for your task. Mar 11, 2018 at 18:25
  • I thank you for all the changes. One last thing, please. How will you configure sSMTP to have 2 or more email addresses instead just one? It is good when you have more than one application on your server. Thanks anyway,
    – user423047
    Mar 14, 2018 at 16:08
  • I now asked another question in the same context, you might want to answer there as well: askubuntu.com/questions/1014937/…
    – user423047
    Mar 14, 2018 at 17:21

You must log in to answer this question.