0

I have a problem with installing Ubuntu Desktop 16.04 LTS on an Intel Joule 570x. I followed the instructions from https ://developer.ubuntu.com/core/get-started/intel-joule (Alternative install: Ubuntu Desktop 16.04 LTS) step by step, but when it comes up to point 3 (booting from the EFI eMMC Device), it seems, that I didn't install anything on the board. First of all I get the message "Please remove the installation medium, then press ENTER". But after removing and pressing Enter I stuck here. This is a development image! Do not use in production.

Am I doing something wrong, or does anybody else has this problem?

PS: I'm totaly new with this and this is my very first question. So if I forgot something to add or made a mistake, please let me know.

Improve this question
3
  • The Warning is exactly that it's telling you that the image is a development image and may be unstable. This is odd as 16.04 LTS was released a year ago. From your picture it looks like it begins to boot. Please review this post for how to determine if your installation ISO was corrupted in some fashion (or you don't have the ISO you think you do)
    – Elder Geek
    Apr 6, 2017 at 13:23
  • Thank you for your answer, Elder Geek! My ISO seems to be OK. Is it possible, that I made a mistake by updating the BIOS? I used the instruction of developer.ubuntu.com/core/get-started/intel-joule again. Updating the BIOS again results in: - Provisioning the eMMC... - WARNING: Provisioning failed! Probably already provisioned. - Checking for RPMB... - Downloading the BIOS... - Clearing NvStroage..." Is it possible to reset the Joule to its factory settings? I tried it with the Boot Maintenance Manager, but it changed nothing.
    – jacknsly
    Apr 6, 2017 at 14:59
  • Your new questions aren't related to Ubuntu so off-topic here, however the answers you seek appear to be here. I highly doubt that your ISO is OK. Please reread the second sentence in my previous comment.
    – Elder Geek
    Apr 6, 2017 at 15:00

1 Answer 1

Reset to default
0

From your picture, it showed the OS is Ostro XT which is shipped with Intel Joule. I am wondering if you remove the microSD card before installation?

Another thing is during the installation, you could choose the target device in a drop-down list. If the board have a microSD installed, the list should show multiple items. Make sure you have chosen the correct media. I do remember the microSD is listed before the eMMC storage.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .