3

I configured fanspeed but it detects only one "temp" captor... In Gnome Sensors applet, I can see the temperature of three captors... The one of my GPU is 75°, 62° for my hard disk and 32° for my motherboard...

I would like to increase the speed of the fans, just with a command in the terminal... It is possible ? I know that there is a material solution (buttons on the computer to increase / decrease fans speed), but I'd like to do it with the terminal =)

Thank you !

1 Answer 1

5

Packages like lm-sensors and fancontrol can help you do this safely. If you really want to do it yourself, you can probably find special device files named pwm1, pwm2, etc. in /sys/class/hwmon/*/device/. You can cat them to get the current value or write a number between 0 and 255 to change the fan speed. (But be careful. You can really fry your hardware!)

It's much easier to just use pwmconfig from the fancontrol package. Run sensors-detect from the lm-sensors package first so that you can see the current temperature and RPM by running watch sensors.

3
  • i don't have a /device/ folder but i can read the correct values from "temp_input" and "temp_crit" without a problem. Any ideas?
    – Goddchen
    May 4, 2012 at 8:13
  • On my thinkpad I have three different hwmonX-folders of which only one contains a pwm-file.
    – Rovanion
    Aug 15, 2013 at 8:24
  • My system is missing the pwm1_enable file. All changes that I make to pwm1 file are overridden almost instantly.
    – kapad
    Jul 25, 2018 at 21:16

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .