4

While automatically updating to the newest version of Ubuntu, my laptop crashed (I was watching youtube videos and the screen went to the desktop, could still hear the audio, but could not get anything to do anything... the mouse arrow would not even move)...

I hard rebooted the laptop and ever since it will only boot into a basic blue background with the one folder icon (looks like a blank piece of paper with a corner folded over). My usb mouse is recognized, but the launch bar does not appear, and I cannot get any programs to launch (or even find any of them)...

If I download Ubuntu on to a usb flash drive and boot my computer with the flash drive plugged in, will it automatically load Ubuntu again? The laptop is a Lenovo x200 that does not have a built in disk drive, I do have a usb cd/dvd drive (the computer does not seem to recognize it when it is plugged in)... What can I do?

1 Answer 1

3

If it crashed during an update, you're in deep trouble. At this point, you have a few options:

  • Reinstall, lose everything. (Easiest. I have done this myself a few times ;)
  • Back up everything, reinstall. (Medium, requires a bit of linux knowledge.)
  • Attempt to repair your current installation. (medium, requires a lot of time. May not work.)

Reinstall, lose everything

Install from the Live CD/USB, just like you did the first time. If you don't remember the procedure, or didn't install it yourself, read this before continuing.

DURING THE INSTALLATION PROCESS, if you're running a dual-boot, tell it to overwrite the existing Ubuntu installation. If it's a full-disk install (i.e., you don't have Windows installed on that computer as well,) just tell it to format the whole disk.

Back up your files, then reinstall

NOTE: For this, you'll need something to back the files up to.

This is actually fairly simple.
While it's booting up, hold CTRL. You should see a screen with a purple background (sometimes it's black) and a few options. One of these is labeled as a "Recovery Mode". Choose it.

During the startup, you'll see a bunch of text on the screen, maybe some errors. Don't panic. Once it finishes, choose "Drop to root shell prompt".

You'll need to know the drive of your external HD (or whatever you're using to back up with.) Type, at the prompt: fdisk -l
You should see a bunch of info. If you pay attention, you'll see that it's arranged in a table. Try to puzzle out which entry is your external HD. (Guessing by size is usually a safe bet.)

Here's my partition table, for an example:

Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System /dev/sda1 * 1 12234 98263714+ 7 HPFS/NTFS /dev/sda2 12234 19453 57985025 5 Extended /dev/sda5 19192 19453 2094080 82 Linux swap / Solaris /dev/sda6 12234 19192 55890944 83 Linux

Partition table entries are not in disk order

Disk /dev/sdb: 8014 MB, 8014266368 bytes 255 heads, 63 sectors/track, 974 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System /dev/sdb1 * 1 974 7823623+ b W95 FAT32

Here, /dev/sda is my hard drive, and /dev/sdb is a flash drive I had plugged in. (1024 MB = 1 GB)

Now, note the Device (e.g., /dev/sdb1) and the filesystem type (e.g., NTFS.)

If it's NTFS, type sudo mount -t ntfs -o nls=utf8,umask=0222 /dev/FOO1 /media/ (replace FOO1 with the drive you found earlier - e.g., /dev/sdb1)

If it's FAT32, type sudo mount -t vfat -o iocharset=utf8,umask=000 /dev/FOO1 /media/ (again, don't type FOO1.)

Now, a good idea is

mkdir /media/ubuntu-backup
cp -Rv /home /media/ubuntu-backup

After if finishes, use another computer to double-check that the files are backed up, then do method 1 above to reinstall.

Attempt to repair your current installation

Use the process in method 2 to get to the root shell prompt. At the prompt, type:

dpkg-reconfigure -a
apt-get update
apt-get dist-upgrade
reboot

(If you'll be running it overnight, just type this one command: dpkg-reconfigure -a && apt-get update && apt-get dist-upgrade -y && reboot. This will run all the commands in order, and tell the upgrade command not to ask any questions, unless there's a problem.)

BE SURE your internet is in a stable condition, and will be so for a while. After you execute the command, it will probably take a LONG time.

If this third method fails, just try method 2.

3
  • If you need any help, just ask in a comment; I'll get back to you as soon as I can. Jan 30, 2013 at 2:33
  • Worked for me, but first I had to remount / as rw as described here: askubuntu.com/a/175742/25693
    – xofer
    May 2, 2014 at 14:48
  • I was referring to the "Attempt to repair" method when I said "worked for me" above.
    – xofer
    May 2, 2014 at 14:56

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .