2

This question intends to demystify Ubiquity the desktop installer for Ubuntu, on how the required disk space before installation is being determined.

From this dated post Determining size of the partition when using Ubuntu Installer:

[When installing] Ubuntu 12.04 alongside with Windows 7 using the Ubuntu installer, [the user] wasn't able to give Ubuntu less than 32 GB [...] and as the guide states, "Ubuntu needs about 4.5 GB to install, so add a few extra GB to allow for your files".

The required disk space was previously about 5 GB (Ubuntu 12.04), 8 GB (Ubuntu 16.04), and has since increased to 25 GB (Ubuntu 18.04), as per minimum system requirements. In practice, the absolute minimum for required disk space may differ by installation media and machine.

The design spec via Ubiquity on Ubuntu Wiki describes the installer mockup and nothing else about how the required disk space is determined (top half screenshot).

Ubiquity design spec and using in practice

I have clarified that Ubuntu 16.04 will require at least 8 GB disk space only on a physical machine, but the minimum changes to 8.3 GB when installing to a virtual machine (bottom half screenshot).

So how does Ubiquity determine the required disk space?

1
  • The link to "design spec" is using URL shortener, so I have included link to the parent page only (Ubiquity on Ubuntu Wiki). Given that there is no "share" button on Google Docs, not sure whether quoting the direct link to the documentation is ethical or not.
    – user37165
    Apr 25, 2019 at 4:45

1 Answer 1

2

To determine the required disk space, Ubiquity will multiply two by an amount of bytes found in the filesystem.size file. Depending on machine setup, Ubiquity may not show the actual required disk space. The full explanation as follows.

The built-in logic

Look into the exact ubiquity package. Browse the file at usr/lib/ubiquity/ubiquity/misc.py and find the function install_size() as follows.

def install_size():
    if min_install_size:
        return min_install_size

    # Fallback size to 5 GB
    size = 5 * 1024 * 1024 * 1024

    # Maximal size to 8 GB
    max_size = 8 * 1024 * 1024 * 1024

    try:
        with open('/cdrom/casper/filesystem.size') as fp:
            size = int(fp.readline())
    except IOError:
        pass

    # TODO substitute into the template for the state box.
    min_disk_size = size * 2  # fudge factor

    # Set minimum size to 8GB if current minimum size is larger
    # than 8GB and we still have an extra 20% of free space
    if min_disk_size > max_size and size * 1.2 < max_size:
        min_disk_size = max_size

    return min_disk_size

min_install_size = None

The min_install_size seems irrelevant and useless at this time of finding.

The try statement will attempt to read the amount of bytes found in /cdrom/casper/filesystem.size, then store the value as integer in the variable size, which then will be multiplied by two, then store in another variable min_disk_size. Finally, the function will return the value of min_disk_size.

Based on the built-in logic, the required disk space is usually twice the amount of bytes found in the filesystem.size file.

Some clarification

The required disk space was previously about 5 GB (Ubuntu 12.04), 8 GB (Ubuntu 16.04), and has since increased to 25 GB (Ubuntu 18.04), as per minimum system requirements. In practice, the absolute minimum for required disk space may differ by installation media and machine.

The required disk space for Ubuntu 18.04 is overstated. If the required disk space is twice the amount of filesystem.size, Ubuntu 18.04 will actually need only about 10 GB or less.

I have clarified that Ubuntu 16.04 will require at least 8 GB disk space only on a physical machine, but the minimum changes to 8.3 GB when installing to a virtual machine (bottom half screenshot).

This either had been noted wrongly or had been mistaken for 16.04 release of other flavours. In fact, I could not reproduce the test result for seeing precisely 8 GB disk space required on a physical machine. From my recent test results, the required disk space for Ubuntu 16.04 is 8.3 GB, regardless of a physical machine or a virtual machine.

In the following screenshot combo, the amount of required disk space is shown for Ubuntu 16.04 32-bit (top half) and Ubuntu 18.04 64-bit when running in a virtual machine.

Ubiquity is showing the required disk space for Ubuntu 16.04 and Ubuntu 18.04

User experience may vary, due to the exact conditions to reproduce the different results are not really understood.

Some calculation

Known information of the Ubuntu releases:

  • Ubuntu 16.04 filesystem.size: 4139667456
  • Ubuntu 16.04 install size seen: 8.3 GB (when disk space is low)
  • Ubuntu 18.04 filesystem.size: 4660985856
  • Ubuntu 18.04 install size seen: 8.6 GB (when disk space is zero)

Given that the filesystem.size and the amount of disk space shown by the installer are known for each system, manual comparison can be made to determine whether each pair of figures would be tally or not.

# Use Python interactive shell to do manual calculation
# round(number,N) will return a floating point number in N digits

# The required disk space for Ubuntu 16.04 (xenial)
>>> size = 4139667456 # filesystem.size
>>> round((size*2)/1000/1000/1000.0,1)
8.3

# The required disk space for Ubuntu 18.04 (bionic)
>>> size = 4660985856 # filesystem.size
>>> round((size*2)/1000/1000/1000.0,1)
9.3

# The required disk space for fallback size
>>> size = 5*1024*1024*1024 # fallback size to 5 GB in ubiquity
>>> round((size*2)/1000/1000/1000.0,1)
10.7

# The required disk space for maximal size
# This is used "as it is" based on the built-in logic
>>> max_size = 8*1024*1024*1024 # maximal size to 8 GB in ubiquity
>>> round((max_size)/1000/1000/1000.0,1)
8.6

Ubuntu 18.04 supposedly needs 9.3 GB of required disk space, but Ubiquity instead had shown 8.6 GB in the screenshot; what went wrong? Try copy edit and test the relevant variables and the if statement from the function install_size():

# Redo calculation according to the built-in logic
# The required disk space for Ubuntu 18.04 (bionic)

# Before
>>> size = 4660985856 # filesystem.size
>>> min_disk_size = size*2 # fudge factor in ubiquity
>>> max_size = 8*1024*1024*1024 # maximal size in ubiquity
>>> round((min_disk_size)/1000/1000/1000.0,1)
9.3
>>> round((max_size)/1000/1000/1000.0,1)
8.6

# After
>>> if min_disk_size > max_size and size * 1.2 < max_size:
...     min_disk_size = max_size
... 
>>> round(min_disk_size/1000/1000/1000.0,1)
8.6

Here is what went wrong: The if statement had chosen the max_size because the min_disk_size for Ubuntu 18.04 is found to be larger than the maximal size.

Not sure why the condition assumed the required disk space (twice of the filesystem.size) would not be larger than 8 GiB (8.6 GB) as defined in the ubiquity package? This "wrong" result seems to be intended by design as per inline comment within the script.

Based on manual comparison, both pair of figures are found to be tally: Ubuntu 16.04 had the installer showing the real install size that is twice the amount of bytes found in the filesystem.size; Ubuntu 18.04 had the installer showing the apparent install size that has been defined as maximal size.

TL;DR The required disk space is twice the amount of filesystem.size, or twice the fallback size, or otherwise the maximal size as defined in the ubiquity package.

You must log in to answer this question.