31

There is a software for Windows called "Logitech Options" which can switch media keys to function keys, but this setting is not remembered in keyboard. There are similar cases with other logitech keyboards already with solutions:

But neither seems to work for K380. Has anyone figured out solution for this keyboard? It probably needs capturing communication between keyboard and Windows software, but it's quite complicated.

Improve this question
6
  • Have you tried looking at the BIOS/UEFI settings? There is usually an entry called "Fn key mode" which determines the default behaviour of Fn keys.
    – Ashhar Hasan
    Dec 12, 2015 at 7:14
  • 1
    No, this function is only for internal keyboard. Required solution is like github.com/milgner/k290-fnkeyctl Logitech has software for windows for FN modifications, but we need to backport this to linux.
    – MᴀʀɪᴜsᴢS
    Dec 12, 2015 at 21:16
  • @MariuzS Thanks for this piece of knowledge. ;)
    – Ashhar Hasan
    Dec 13, 2015 at 4:19
  • I was able to do this by using Solaar (github.com/pwr/Solaar). Your device does not seem to be on the list of supported devices (github.com/pwr/Solaar/blob/master/docs/devices.md), though you might still want to give it a try.
    – zenhaeus
    Dec 14, 2015 at 19:07
  • Solaar is not working for me
    – MᴀʀɪᴜsᴢS
    Dec 15, 2015 at 15:30

5 Answers 5

Reset to default
35

I created GitHub repository for k380 configuration program.

https://github.com/jergusg/k380-function-keys-conf

I did the same steps as Mario to get sequence for k380. The code is same as Mario's, but with the sequence for k380 keyboard and k380 device ID. It outputs write: 0 were written instead of 7 on my computer, but it works anyway.

The sequences are:

const char k380_seq_fkeys_on[]  = {0x10, 0xff, 0x0b, 0x1e, 0x00, 0x00, 0x00};
const char k380_seq_fkeys_off[] = {0x10, 0xff, 0x0b, 0x1e, 0x01, 0x00, 0x00};
Improve this answer
4
  • It worked perfectly for my k380 on Arch Linux.
    – NVaughan
    Jan 28, 2019 at 16:45
  • 1
    Thank you. It's work like a charm.
    – thanhnha1103
    Mar 30, 2020 at 13:49
  • It's work for me (K380 on Ubuntu 20.04)
    – Anh-Thi DINH
    Aug 16, 2020 at 12:54
  • Thanks this was just so easy ..!!
    – Md Faisal
    May 28, 2022 at 4:16
13

I like Jerguš's answer, but I don't want to compile c code.

Here is the equivalent one-line bash

echo -ne "\x10\xff\x0b\x1e\x00\x00\x00" | sudo tee /dev/[the device]

Even better, this can be automatized!

Create a file /etc/udev/rules.d/70-logi-k380.rules with the folloing line

ACTION=="add", SUBSYSTEM=="hidraw", KERNEL=="hidraw*", SUBSYSTEMS=="hid", KERNELS=="*:046D:B342.*", RUN+="/bin/bash -c \"echo -ne '\x10\xff\x0b\x1e\x00\x00\x00' > /dev/%k\""

Your keyboard will be fn-locked automatically.

Improve this answer
2
  • how do I get the [the device]?
    – Chiptus
    May 16, 2022 at 7:38
  • 3
    @Chiptus ls /dev/hidraw* will list all hid devices. And grep -FH "HID_NAME" /sys/class/hidraw/hidraw*/device/uevent will tell you which one is your keyboard.
    – Tianren Liu
    May 19, 2022 at 16:35
9

Just an update, Logitech Options software can natively support the feature, Use F1 - F12 as standard function keys. See the picture below.

enter image description here

Improve this answer
3
  • System Requirements Supported Logitech device Windows® 10, Windows 8, and Windows 7 macOS™ 10.11 or above Logitech Flow requires computers that can connect to each other over a local network.
    – Jerguš
    Jul 13, 2020 at 11:47
  • I installed this on a windows VM with an usb bluetooth passthrough, then selected the option to use f1-f12 as standard function keys, but this only works on the selected OS. If I switch back to my ubuntu profile it wont respect the selection
    – Guerlando OCs
    Mar 25, 2021 at 19:49
  • Thanks @CHANist it works well. Link - logitech.com/en-us/software/options.html
    – Alexis
    Jul 15, 2022 at 9:01
1

I have exactly the same problem and also found the article about K810, which is:

http://www.trial-n-error.de/posts/2012/12/31/logitech-k810-keyboard-configurator/

I have already tried something similar to what Mario did with K810, but I am yet to find the proper sequence that needs to be sent to K380. In fact, it's something I don't quite understand from the article. I have already sent Mario a message asking how he figured out the exact sequence, but I don't have any reply yet.

In case someone else tries to figure it out, this seems to be the keyboard ID, at least in my case:

#define HID_DEVICE_ID_K380      (__s16)0xb342

vendor ID seems to be the same:

#define HID_VENDOR_ID_LOGITECH  (__u32)0x046d
Improve this answer
3
  • 2
    I did procedure from the article and found the sequence which is 0x10, 0xff, 0x0b, 0x1e, 0x00, 0x00, 0x00. Device ID is as you wrote. I works for me.
    – Jerguš
    Dec 23, 2015 at 9:30
  • Awesome, it works for me, too! Thanks a lot!!!
    – mdm
    Dec 23, 2015 at 19:56
  • echo -ne "\x10\xff\x0b\x1e\x00\x00\x00" | sudo tee /dev/[the device], it works on my keyboard, thank you so much.
    – Claire Duong
    Jun 11, 2022 at 16:45
0

I've just bought Logi K380 and installed the Solaar app. It seems that it is being supported by Solaar app now. (Kubuntu 22.04)

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .