0

I am getting the error message read error while booting. After power up, I get a black screen with cursor at top, and after a while around 1:30 min. I get a read error message at the top.

I shut down and restarted a couple of times, and it went back to normal. Was it a hard-disk error, or was it coming from Ubuntu?

2 Answers 2

4

The best way to check your hard disk for errors, is to download diagnose software from the hard disk vendor.

You can also install the program smartmontools and

  1. Check the S.M.A.R.T. values of the disk using sudo smartctl -A /dev/sda (change /dev/sda to fit your hard disk),
  2. Run a self test: sudo smartctl -t long /dev/sda (will take some time, you can check the status of the self test running sudo smartctl -l selftest /dev/sda).
1
  • does my error mean I have a hardware error?
    – S L
    Feb 28, 2011 at 7:47
2

If you mean I/O read error when reading from the harddisk then it probably is a hardware error. I would check the health of the drive (use smartmontools or Palimpsest Disk Utility).

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .