398

Dual boot system Windows XP Pro and Ubuntu 12.04.

I have the bios set for the correct time and Ubuntu set for US Eastern time. Ubuntu will boot up and the time will be off by -4 hours. If I correct the time in Ubuntu then when I boot up in Windows XP the time will be off by + 4 hours.

This is a fresh install of 12.04. I did not have this problem before reinstalling Ubuntu.

6 Answers 6

372

https://help.ubuntu.com/community/UbuntuTime#Multiple_Boot_Systems_Time_Conflicts

Multiple Boot Systems Time Conflicts

Operating systems store and retrieve the time in the hardware clock located on your motherboard so that it can keep track of the time even when the system does not have power. Most operating systems (Linux/Unix/Mac) store the time on the hardware clock as UTC by default, though some systems (notably Microsoft Windows) store the time on the hardware clock as the 'local' time. This causes problems in a dual boot system if both systems view the hardware clock differently.

The advantage of having the hardware clock as UTC is that you don't need to change the hardware clock when moving between timezones or when Daylight Savings Time (DST) begins or ends as UTC does not have DST or timezone offsets.

Changing Linux to use local time is easier and more reliable than changing Windows to use UTC, so dual-boot Linux/Windows systems tend to use local time.

Since Intrepid (8.10), UTC=yes is default.

Make Windows use UTC

Note: This method was not initially supported on Windows Vista and Server 2008, but came back with Vista SP2, Windows 7, Server 2008 R2 and Windows 8/8.1.

To make MS Windows calculate the time from the hardware clock as UTC.

Create a file named WindowsTimeFixUTC.reg with the following contents and then double click on it to merge the contents with the registry:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]
     "RealTimeIsUniversal"=dword:00000001

Note: Windows Time service will still write local time to the RTC regardless of the registry setting above on shutdown, so it is handy to disable Windows Time service with this command (if time sync is still required while in Windows use any third-party time sync solution):

sc config w32time start= disabled

Reversing the change
You can create a file with the following contents and then double-click it to merge in the original changes, as above:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]
     "RealTimeIsUniversal"=-

If Windows Time service was disabled, enable it again with the command:

sc config w32time start= demand

Make Linux use 'Local' time

To tell your Ubuntu system that the hardware clock is set to 'local' time:

Pre-Ubuntu 15.04 systems (e.g. Ubuntu 14.04 LTS):

  1. edit /etc/default/rcS
  2. add or change the following section

    # Set UTC=yes if your hardware clock is set to UTC (GMT)
    UTC=no
    

Ubuntu 15.04 systems and above (e.g. Ubuntu 16.04 LTS):

  1. open a terminal and execute the following command

    timedatectl set-local-rtc 1
    
16
  • 86
    Oh lord. I can't believe they were dumb enough to use local time on a hardware clock. Why would you ever, ever do that?
    – iono
    Dec 9, 2013 at 7:22
  • 33
    @twome because since there wasn't much in the way of networking in the early days of MS-DOS, and it wouldn't have been common to move a PC so far that it moved timezones. (And yeah, even considering that history, it was still not the best move).
    – Jon Hanna
    Apr 22, 2014 at 13:44
  • 14
    @twome although I agree with you re hardware clock staying as Universal, since it doesn't keep timezone information, there are few problems with that: A) BIOS/UEFI have various features such as auto-wake up/sleep timers, where you set times for those triggers. It'd be weird to set those times in UTC - at least for average user. B) As Jon said above, backward compatibility reasons.
    – Gelmir
    May 15, 2014 at 19:19
  • 13
    In Windows PowerShell run this command to update the above mentioned registry property: New-ItemProperty -Path HKLM:\SYSTEM\CurrentControlSet\Control\TimeZoneInformation -Name RealTimeIsUniversal -PropertyType DWord -Value 00000001 Jan 14, 2015 at 9:29
  • 20
    For those skimming the text, you only have to change settings in one of the OSes, not both. Aug 8, 2017 at 19:29
80

To set the BIOS clock to local time instead of UTC in a systemd-based version (15.04 and above), you will have to use the timedatectl command. According to the Arch Wiki:

You can set the hardware clock time standard through the command line. You can check what you have set to use by:

$ timedatectl | grep local

The hardware clock can be queried and set with the timedatectl command. To change the hardware clock time standard to localtime, use:

# timedatectl set-local-rtc 1

If you want to revert to the hardware clock being in UTC, do:

# timedatectl set-local-rtc 0
3
  • 5
    On Ubuntu 16.10 it helped to do "hwclock --systohc --localtime". This writes the "local part" to /etc/adjtime and thereby makes it permanent. Oct 21, 2016 at 19:25
  • 3
    @user1050755 is that before, after, or instead of the timedatectl command?
    – nasch
    Jan 16, 2018 at 0:45
  • For me too, on Antix-Core-22, only hwclock --systohc --localtime worked! After that, I changed the clock on the BIOS, and voilà! Mar 6, 2023 at 18:32
39

Your time zone is Eastern, which is currently EDT (Eastern Daylight Time). EDT is UTC minus four hours, the same as the offset you're experiencing.

When this happens on a dual-boot system, it's usually because one operating system thinks the hardware clock tracks local time, while the other operating system thinks the hardware clock tracks UTC.

In your case, your hardware clock is probably set to the local time, and:

  • Windows is set to use local time, which (given your time settings) is correct.
  • Ubuntu is set to use UTC, which (given your time settings) is incorrect.

If you were to just reset the time in the Ubuntu system, either manually or automatically, it would then be wrong in Windows, so that's not a good solution.

Instead, the best solution is probably to reconfigure Ubuntu to treat the hardware clock time as local time (then you can leave your Windows configuration, and your hardware clock time, alone).

To do this, edit /etc/default/rcS as root and make sure it has UTC=no:

  1. Press Alt+F2.

  2. Type gksu gedit /etc/default/rcS and press Enter.

  3. You'll probably see this:

    # assume that the BIOS clock is set to UTC time (recommended)
    UTC=yes
    
    • If you do, change UTC=yes to UTC=no. (Or you might want to add a comment too, by changing it to something like UTC=no # changed to accommodate Windows system. Everything on a line after a # character is a comment, and is there just to make your settings more human-readable.)
    • If you don't, look for any UTC= line. If it's uncommented (i.e., doesn't have a # at the beginning), change it accordingly. If it is commented, uncomment it by removing the leading # and make sure it says UTC=no.
  4. Save the file and quit the text editor.

  5. Reboot to apply your changes and check that the time is working properly now on both operating systems.

Source: https://help.ubuntu.com/community/UbuntuTime#Make_Linux_use_.27Local.27_time

(But that is very general; I have written this answer to apply specifically to your situation, which is a somewhat common problem.)

4
  • Note that this can also occur when you upgrade from one Ubuntu release to the next, like it did for me. I can recommend performing the above fix, and then also manually syncing your clock as in this answer (adjusting it to work with systemd): askubuntu.com/a/254846/139735 Jun 20, 2016 at 20:03
  • This should be the accepted answer imho. I had Windows installed and running fine, then I installed Ubuntu and the clocks went haywire - I can't see a reason why I should modify Windows settings if it was clearly the addition of linux that broke my configuration.
    – Przemek D
    Apr 18, 2018 at 8:03
  • 1
    @PrzemekD That's kind of arbitrary though. I had Linux installed and running fine, then I installed Windows and the clocks went haywire. They just disagree on whether hardware clocks should be in local time or in UTC. Aug 7, 2021 at 21:32
  • @Ullallulloo You might be right, I am a lifelong Windows user and looking from Windows-centric perspective.
    – Przemek D
    Aug 16, 2021 at 15:52
15

The /etc/rcS fix did not work on my Win7 / Ubuntu 14.04x64 installation, nor did any fixes through the clock GUI. Because the root of the problem is BIOS time VS UTC time, and Windows is a pain in the butt when it comes to using UTC, I just picked a point on the map that uses UTC+0 (no change between BIOS and UTC time).

Try changing your location to Reykjavik (the capital of Iceland). Voila! Your Ubuntu time will change to match your BIOS time.

2
  • Haha! Awesome. :D I really don't care my location. This was two seconds fix. Thanks a lot.
    – Ravindra S
    Mar 10, 2015 at 9:05
  • 1
    this just works, but changing your time zone is not the correct solution. please check the other answers.
    – logoff
    Jan 4, 2021 at 11:44
3

I had 1h of difference on each time I boot into linux or windows. It's because one is on UTC ant the other one in RTC

To fix my ubuntu 20.04 I used this:

timedatectl set-local-rtc 1 --adjust-system-clock

in my case to go back to UTC you can

timedatectl set-local-rtc 0 --adjust-system-clock

and if you want to check what you're using you can type that: timedatectl

1
  • Thanks! This answer does provide a crucial option other answers don't provide. Oct 10, 2022 at 14:48
2

enter image description here

We can ask Windows to sync time with the network on every reboot:

  1. Search for "Services" from the start menu.
  2. Locate "Windows Time".
  3. Set "Startup type" to "Automatic". In my case, the time updates at about 10 seconds after logging in to Windows.

On Ubuntu, we can set "Automatic Date & Time" in settings, and by default, it runs on every reboot automatically.

This is my favorite approach as it does not require modifying the registry or setting Linux to use "local" time, which might have side effects such as daylight saving time synchronization.

See this answer and this answer for more reference.

1
  • 1
    The problem with this is that your logs will have the incorrect time between boot and sync as this will change the bios time every time you change OS. This could cause issues with applications as well
    – rtaft
    Sep 27, 2021 at 19:34

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .