I am running a program in the terminal that I can't escape with Ctrl-C and that I want to kill. How can I find its PID?
11 Answers
Open another terminal and run ps ax | grep foo
where foo is the name of the unresponsive program. This should return a line of output that looks something like this:
$ ps ax | grep firefox
2222 ? S 0:00 /bin/sh /usr/lib/firefox-3.6.9/firefox
2231 ? Sl 514:36 /usr/lib/firefox-3.6.9/firefox-bin
30290 pts/2 S+ 0:00 grep --color=auto firefox
The first field of each line of output is a number which represents the Process ID of the program matched by grep
(you can safely ignore the last one, which represents grep
itself.
To halt the offending process, do:
kill pid
where pid is the Process ID of the program. You might have to use your judgment as to which of the matches needs to be kill
ed, or you could use top
instead. Using kill
by itself sends SIGTERM, which you should try first as it allows the program to properly clean up after itself. If SIGTERM fails, try SIGHUP, which is stonger medicine: kill -HUP pid
. If all else fails, send SIGKILL. But, you should only do so as a last resort, because SIGKILL causes the kernel to terminate the process immediately with no possibility for cleanup. This can at times result in data corruption or other problems. So again, only send SIGKILL as a last resort. To do so, do kill -KILL pid
or kill -9 pid
.
If you are running a graphical interface, of course, you don't have to fool with this crazy command-line stuff to get the job done. Just open "System Monitor", navigate to the Processes tab, choose the process you want to halt (Hm, could it be the one using 90% CPU?) and right-click it. Since the process is already stopped, (that's the problem, right?) choose End Process or Kill Process from the resulting menu.
Credit to koanhead
-
9People should never use SIGKILL (kill -9) unless all other methods have failed. Only listing
kill -9
is bad advice. I've edited the answer to correct it. Aug 26, 2012 at 10:04 -
How can I find the pid of a custom function. I have a function that contains a loop with a
ping
command andsleep
. According to unix.stackexchange.com/a/275826/72988 , it is not possible in Ubuntu withoutmultiplexer
.– TimoFeb 3, 2018 at 9:27 -
To get all open
programs
by id would not be possible because then you have also allservices
and end withps -ef
?– TimoJun 20, 2021 at 7:35
I don't think there is any need of such long commands when you can accomplish the same commands with pgrep, pkill, pidof etc...
To get the PID of a running program you can use commands like pgrep
or pidof
:
pgrep
pgrep [options] pattern
pgrep
looks through the currently running processes and lists the process IDs which match the selection criteria to stdout. All the criteria have to match. For example,
To find process named sshd owned by root.
$ pgrep -u root sshd
List the processes owned by root OR daemon.
$ pgrep -u root,daemon
List the processes searching the full command line (
-f
) and list the full command line as well as the process ID (-a
).$ pgrep -fa needle
pidof
pidof
finds the process id's (pids) of the named programs. It prints those id's on the standard output.
pidof program_name
To kill a program by pid use pkill
. Example:
pkill pid
pkill -f process_name
pkill -o process_name
pkill -n process_name
pkill -l process_name
-f
flag: Searches the process_name (see man pkill)-o
flag: Select only the oldest of the matching processes.-n
flag: Select only the newest of the matching processes.-l
flag: List the process name as well as the process ID.
-
-
@CrazyVideoGamer if two processes of the same program are running it returns two pids– lmaoooooNov 11, 2021 at 20:18
The easiest way to know the pid of a running program is using:
pidof <application name>
For example, if you started vim and want to know its pid:
pidof vim
Remember that you will need to provide the exact program name that has been started.
For example, if you are running vi and execute pidof vim
you won't get correct results.
Refer to pidof
's manual page for more info.
-
This isn't installed by default. It might be in the sysvinit-utils package. Sep 19, 2014 at 19:24
-
I got MariaDB.
pidof mysqld
returns a PID. However, if I typepidof Mariadb
nothing is returned. Is it the same PID for both MariaDB and MySQL?– PathrosJun 13, 2018 at 15:18
I have found it is nice to use a case insensitive search by adding the "-i" and using "aux" instead of "ax" to get a more descriptive output:
ps aux | grep -i firefox
If you would like to kill all the processes you may use:
ps aux | grep -i firefox | awk {'print $2'} | xargs kill -9
That is a forceful kill. Drop the "-9" if you want a soft kill.
-
8This also kills the
ps aux | grep -i firefox...
process, because that contains the textfirefox
in its command!– EricJul 21, 2014 at 9:41 -
2
-
-
1
ps aux | grep -i firefox | grep -v grep | awk {'print $2'} | xargs kill -9
to omit the killing of the grep statement itself Feb 1, 2021 at 23:41
If you want only the pid (useful for autokill scripts, etc...)
pgrep -f desired_program_name
For those running Ubuntu 16.04 LTS, you must use ps ax
and not just ps
at the command line, otherwise you will just get the processes spawning from the particular terminal instance that you're in. (usually just 'bash' [the shell you're in] and 'ps' [what you just ran])
-
-
1
You can also open another terminal (or switch to another tty) and run top
, which is basically a text version of the System Monitor. The first column lists the PID of each running process, which you can kill by pressing K, entering the PID and then entering a numeric signal to send.
You could do:
ps ax | grep firefox | cut -f2 -d" " - | xargs kill -9
first two pipes get process info, next we try to get PID column by using the old-school cut and then we give the resulting PID to kill.
-
kill -9
is the biggest gun you have to kill a process. You should try a more gentle signal at first before resorting to SIGKILL to give the process a chance to clean up its resources.– Byte Commander ♦Sep 27, 2016 at 21:30 -
That's true @ByteCommander. I wanted to make it a one liner that will get the job done.– arianvcSep 28, 2016 at 6:40
sed (stream editor) for process id(s) or pgrep
:
echo $(p="bash"; ps -e | sed -E "s/^ +([[:digit:]]+).+${p}$/# \1/;s/^[^#].+$//;/^$/d;" -)