Tag Info

Hot answers tagged

10

Try Cinelerra. Cinelerra is the most advanced non-linear video editor and compositor for Linux. Cinelerra also includes a video compositing engine, allowing the user to perform common compositing operations such as keying and mattes.Cinelerra To download click here. (Edit: or install on 12.04 with the following commands.) sudo apt-add-repository ...


8

I was eventually able to solve this. I replaced the EFI/Microsoft/boot/bootmgfw.efi with the grub64.efi. I renamed the former to bootmgfw.efi.old and used grub to add a menu option to chainload into it. This implies that the firmware is hardcoded to look for the microsoft windows bootloader, and does not respect efibootmgr settings, or startup.nsh. That's ...


7

I have a Xperia Sony Live with Walkman phone and i upgraded it into ICS 4.0 using official ROM. I has same problem and i found answer... You must set connectivity mode of your phone into mass storage mode (MSC). You can found this option through "Settings > Xperia > Connectivity > USB CONNECTION MODE > Change the option from MTP to MSC" Please notice that ...


6

It's a known problem with the intel GMA 500 that your computer uses. The fix is avaliable in a ppa. To sum up, type in your teminal: sudo add-apt-repository ppa:gma500/ppa sudo apt-get update sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d poulsbo-config and reboot.


5

Finally I found solution in this web: http://www.voip-x.co.uk/files/adam/ :D Thanks to "gokulvarma" -> with nomodeset I enter to console mode (tty). And I installed: linux-image-2.6.36-0-vaioz_2.6.36-0.1_amd64.deb linux-headers-2.6.36-0_2.6.36-0.1_all.deb linux-headers-2.6.36-0-vaioz_2.6.36-0.1_amd64.deb Thanks to Adam and Sony Vaio Z group, in ...


5

This solved my problem on my Vaio vpceg: sudo gedit /etc/rc.local Place this above the exit 0 line: rfkill unblock wifi rfkill unblock all sudo modprobe -r acer_wmi


5

select USB Connection Mode,then choose : Mass Storage Mode(MSC) take a look for this step by step solution it worked for me


5

First, you don't have two ESPs. An ESP is a partition with a partition type code of C12A7328-F81F-11D2-BA4B-00A0C93EC93B, which parted identifies as a partition with its "boot flag" set. Your output indicates that only /dev/sda3 has its "boot flag" set, so you've got only one ESP -- /dev/sda3. Under GPT, partitions can have names, and you've got two ...


4

Ok, I got to a different solution that should work for other laptops too, not only for VAIOs. Make sure that xbacklight and inotify-tools are installed, I just ran sudo apt-get install xbacklight inotify-tools . Configure the following script and save it as a bash script (for example, save it as backlight_control.sh), and give it executable permissions ...


4

Same starting position here on a new sony vaio e series. Thanks Rod for your answer. Just in case someone needs a walkthrough, this is what worked for me: Installed ubuntu 12.04 from USB alongside win7. mounting /dev/sda3 from live-session copy EFI/ubuntu/grubx64.efi to EFI/Boot/ rename EFI/Boot/bootx64.efi to bootx64.efi.old rename ...


4

Your system has nvida chips. So please install driver from Addtional Drivers (press Super / Win, and search for it). Reboot and see if it solves the problem. If above not working try following (but don't uninstall the driver) execute sudo gedit /etc/default/grub Change this line GRUB_CMLINE_LINUX_DEFAULT="quiet splash" to something like below ...


3

Using the NetworkManager command line tool to enable wifi solved my problem: nmcli nm wifi on Seems like the NetworkManager believed that the hardware switch was turned off and dimmed the "enable wireless" due to that "wrong" information. However forcing to enable wireless with the command line tool worked.


3

I haven't tested it (yet!), but apparently there's an Open Source version of "Content Manager" that has been developed for connectivity with the PlayStation Vita: QCMA Most of the users at that link claim it works for them, so I'm gonna test it out as soon as my PlayStation Vita is charged...


3

From Encoding H.264/AAC in MP4 for the PSP: ffmpeg: -profile:v main -level 3 -x264opts ref=3:b-pyramid=none:weightp=1 Note that you are no longer using ffmpeg from FFmpeg, but avconv from a fork called libav. The example command is specifically for ffmpeg (the real one).


3

The solution for me was to edit the /etc/X11/xorg.conf file. It's a problem with the graphics driver not the keymap. Open the file for editing and add the line Option "RegistryDwords" "EnableBrightnessControl=1" in the Section "Device" section as shown below. Section "Device" Identifier "Device0" Driver "nvidia" VendorName ...


2

This text was initially in Spanish. I worked in Fedora 17. You should open /etc/X11/xorg.conf. Must add the line: Option "RegistryDwords" "EnableBrightnessControl = 1" Example: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" Option "RegistryDwords" "EnableBrightnessControl=1" ...


2

When you open your Ubuntu just connect it to internet and open 'Additional Drivers' application. Then it shows available graphics drivers for your system. You can install from there and it will be fine.


2

Interesting bug. I would try using Alt-SysRq-T to see what tasks seem to be running, then file a bug based on that. It would also be interesting to know whether Alt-SysRq-B reboots it or not.


2

I would advise going with a different mp3 player. A lot of people on the web seem to have issues with making the walkman interact smoothly with audio programs. If you want that particular mp3 player, here's how to make it work with ubuntu: http://ubuntu-virginia.ubuntuforums.org/showthread.php?t=866297 Otherwise, I'd recommend a generic used iPod ...


2

Avidemux (You need to enable the multiverse repository for this to work): How do I enable the "multiverse" repository? Avidemux is a GTK application designed to allow you to easily resize, rescale and convert videos from one format to another. For your case it sounds perfect! According to the Sony website you just need to convert the videos ...


2

You can also test your microphone in the Sound Preferences. Click the Indicator Applet's sound icon and select 'Sound Preferences...' Select the 'Input' tab In the 'connector' drop down, select one of the microphones and speak. If it works you should see the 'input level' raise & change color. If it doesn't work, try raising the 'input volume'. Also make ...


2

These shortcuts are controlled by the udev subsystem. In technical terms, all shortcuts are defined in /lib/udev/keymaps. For example, for a standard Sony laptops, the file is /lib/udev/keymaps/module-sony (new Sony laptops). 0x06 mute # Fn+F2 0x07 volumedown # Fn+F3 0x08 volumeup # Fn+F4 0x09 brightnessdown # Fn+F5 0x0A brightnessup # Fn+F6 0x0B ...


2

Might want to check this question out: Problems with graphics of Sony Vaio Z The quick answer is that you can get both graphics cards to work, but you will have to reboot to switch between them. Also, from the little googling I did, it looks like a royal pain to set up right now. (see link) Probably in a year the process will be nice and smooth, but right ...


2

Append this line to file /etc/modprobe.d/blacklist.conf blacklist acer_wmi and your wireless will getup soon.


2

maybe look at the monitor icc profiles. You can load them in gnome with gnome color manager or just using xcalib. Maybe in windows, some factory default icc profile is loaded for your monitor. On my laptop, the colors look bluish without icc profile (factory standard seems to be 6500K temperature). I use color munki to calibrate the screen to get 4600K ...


2

You can probably just remove the nvidia-current package which broke your system and then install the nvidia-173 package: sudo apt-get remove nvidia-current sudo apt-get install nvidia-173


2

Any USB storage device (e.g. any camcorder, camera etc.) can simply be plugged in to an USB port and mounted as removable storage device. No additional drivers are needed to do so. We can browse the files on our camcorder with the default file manager Nautilus and simply copy & paste or drag & drop them to the desired location on our hard drive. ...


2

First give a try to obacklight. Earlier it solved may problems with sony laptops. Most preferable solution. It is based on nvidabl. You need to install nvidiabl first. Installation instruction is available on the page. If the above is not working, revert back all changes. Uninstall nvidiabl & remove obacklight script from /etc/init.d. Then follow ...



Only top voted, non community-wiki answers of a minimum length are eligible