Tag Info

New answers tagged

0

If you don't like the GUI method or you have non-Unity/Gnome desktop, the easiest and infallible way is: ➜ ~ sudo ifconfig [sudo] password for braiam: eth0 Link encap:Ethernet HWaddr 00:13:d4:13:1c:0f inet addr:X.X.X.X Bcast:0.0.0.255 Mask:255.0.0.0 inet6 addr: fe80::213:d4fb:fe13:1f0f/64 Scope:Link UP BROADCAST ...


1

First of all try ifconfig. If you are directly connected to internet or not behind a router, then It will show your public and local IPs, both. find the lines inet addr:X.X.X.X. Here X.X.X.X will be your ip. (It might be local/private ip like 127.0.0.1 or 192.168.X.X or public ip like 117.197.X.X) If you are behind a router, then your computer will not ...


0

Click on the network icon in the top left of your screen: And then select Connection Information, you will see a window with all the information you need:


1

If your multi-function device is connected by USB to your computer, then it does not have an IP address. You should try to configure in another way. If your multi-function device has an Ethernet port (for network cable), and is connected to your local network (to the router), then it has an IP address. You can print the settings page of the device in order ...


0

I install from sane-backends-1.0.24 from sources as follow: apt-get install usblib-dev # for USB support!!! ./configure BACKENDS="epjitsu fujitsu" PRELOADABLE_BACKENDS="epjitsu fujitsu" --prefix=/ make make install I added scanner in fujitsu and epjitsu as you comment here. Linking boths firmwares to /share/sane/epjitsu/1300i_0D12.nal I added ...


0

After I update to 13.10 I got the same error when scanning. There are two problems here. The error Invalid argument is not a argument problem, but is a write access problem. The other problem is that the bus and dev number are wrong from the scanimage error. How to find and fix the problem install the brscan4 drivers from the brother website sudo dpkg ...


0

Many times when there is unpredictable behaviour, some setting file(s) is damaged or corrupted. In the case of Xsane, it will probably be the device settings. You will find these settings in ~/.sane/xsane/yourscanner.drc. It is an invisible folder, you can make it visible by typing ctrl-h. if you remove this file, Xsane will create a new one. If you get a ...


1

I'm using iscan with my epson that you can download from epson website (I checked and it's compatible with yours also). Please note that if you want to connect to your printer through network and not directly (like usb) you have to install the network package (both downloads on here) and change the epkowa.conf file as explained here. For any doubts or ...


0

This page lists scanners compatible with Linux Sane. The Epson 1670 perfection is marked as supported. Therefore, Simple Scan, which is installed by default on Ubuntu should permit you to scan with your scanner. However, this won't be an exact equivalent of Smart Panel.


0

Check your /etc/sane.d/epkowa.conf file. Depending on how you connect to your scanner you may need to comment out the connection types you don't use with a '#'. For example: I connect to my scanner using Wifi, I've commented out usb & scsi and added/edited the net line: From terminal: sudo nano /etc/sane.d/epkowa.conf # epkowa.conf -- configuration ...


2

I don't think you will find something equal has that is proprietary software, although you have other alternatives. Xsane VueScan 9 Gimp also has the abbility to scan if you install the plugin QuiteInsane. Actually i use iscan. If you have any doubts on Scanning on Ubuntu i suggest you read the Scanning HowTo


0

I'm using Ubuntu 13.10 32bit I use MFC-7820N and everytime I upgrade the kernel I have to reinstall all the brother drivers. The ones I have are: brmfc7840nlpr-2.0.2-1.i386, brscan2-0.2.5-1.i386, cupswrapperMFC7840N-2.0.2-1.i386 I then double check that the rule "ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"" has not been modified or deleted in ...



Top 50 recent answers are included