Tag Info

Hot answers tagged

5

I found a solution by myself!! Betavine Connection Manager can manage messages! That's it. Also try, KMobileTools, Vodafone Connection Manager!


4

Since you mentioned RJ11 this likely means you have a standard modem in your computer, this usually means that you need a softphone sometimes called a telephony application that uses the modem to accept and initiate calls using PSTN. If you can find any such application for Ubuntu that you can install and run properly, what you ask may work, I do not know ...


3

You can simply stop the Network Manger and everything will run great including Ubuntu Software Center! stop it by run this commend in the terminal: sudo stop network-manager you can bring it back by restart your computer or simply run this: sudo start network-manager


3

Internet Connection Setup in Ubuntu (Wired) Before I go into this detailed technical babble, I want to go over a basic check list for connectivity to the Internet. Cable/DSL modem is powered on and is authenticated with your ISP (meaning, the “Cable” or “DSL” light on the front is on solid, and you have a good connection to your ISP). Your cable modem is ...


3

I have a Huawei E1780 which also creates /dev/ttyUSB0 , /dev/ttyUSB1 and /dev/ttyUSB2 gsm-ussd --device /dev/ttyUSB2 --no-cleartext '*100#' works for me. You can also add --debug maybe that helps finding the problem.


3

The procedure to do this thing is fairly same for Ubuntu 11.10 and Ubuntu 12.04. Here's how: Click on Bluetooth icon on the panel, and Set up New Device Switch on your mobile Bluetooth and make sure it's visible. Now select your mobile phone from Ubuntu options to pair it up with your Ubuntu. It might show some codes, just do what it says and go ...


3

For Ubuntu 10.04 (skip this step for Ubuntu 10.10): install usb-modeswitch and follow the below steps. Right Click on the NetworkManager icon from the panel notification area > Edit Connections. Mobile Broadband > Add. You will get a New Mobile Broadband Connection Dialog. (Reliance-Huawei is autodetected) Forward > Country List: India ...


3

The point was to choose PC suite mode on the phone instead of IP passthrough mode. It works well now.


3

There are few discussions with respect to this but they all seem to stop in 2006. The most recent post I have found is: http://forums.bit-tech.net/showthread.php?t=111225 But again this one is from 2006. Can I ask why not just use VOIP?


3

This happened due to bugs(or bug) in the ModemManager 0.6.0.0 which shipped with Ubuntu 12.10. You can remove this modem manager version and downgrade in to 0.5.2. To check modem manager version : dpkg -s modemmanager download 0.5.2 version : link 64 --- i386


3

INTEX 3.5g 7.2 Mbps (aka 普创E003) Wireless Modem Driver Download: intex35g-modem.deb If you're having problems with the above driver, try an old version of the same driver which uses eject instead of usb-modeswitch. Download it here: intex35g-modem v0.5.deb These deb packages were built and tested on Ubuntu 12.04 LTS. As these packages contain no ...


3

It may be a bit late now, yet I was unable to connect using iBall 3.5g v2.0 on my Ubuntu 12.04. All the guides available online were not useful. Edit: First the BashScript I'm using to connect my iBall3.5G #!/bin/bash set -x usb_modeswitch -W -n -I -v 05c6 -p f000 -V 05c6 -P 0016 -M 55534243e0793c88000000000000061b000000020000000000000000000000 > ...


2

if you are still interested... Mobile Partner is not a standard .deb so it won't be present on Synaptic. You need to use their dedicated script located here /usr/local/Mobile_Partner/UninstallMobilePartner


2

try Linux Huawei Unlocker Linux Huawei Unlocker is a tool that attempts to automatically remove the carrier lock on Huawei mobile broadband modems from the Linux command line. It automatically finds IMEIs, calculates unlock codes, checks SIM lock status, displays remaining unlock attempts, and asks the user for confirmation before trying the unlock code. ...


2

Option 1 Notice on your network connection when you plugged your usb modem. Just wait more seconds to see something like this: click on CDMA and follow the configuration steps. Opetion 2 Install Gnome-ppp sudo apt-get install gnome-ppp Click on setup and then detect. If it's detects your stick, the dialog box will disappear. if not, it will ...


2

Hmm... the answer might depend a lot on the modem type, all are "real" ;-) Here is a google search for "Fastrack" modem manuals, https://www.google.se/?gfe_rd=cr&safe=off#q=fastrack+modem+manual&safe=off If you look through them you eventually find "AT+CSQ" in there, The prepended "+" followed by "CSQ" is short for "Cellular, Signal Quality" (edit: ...


2

The network connections used by Network Manager are stored in /etc/NetworkManager/system-connections. Each connection has its own file with the connection name as its name. Open a terminal and delete the file associated with your connection with the rm command. For example, root@usermachine:/etc/NetworkManager/system-connections# rm filename Note: You ...


2

Drivers are never needed for a Router. A router will always be accessed via a web page. You can determine the web page to go to by looking at your IP settings. So if you execute the command ifconfig you get an output like eth0 Link encap:Ethernet HWaddr 90:2b:34:36:50:55 inet addr:192.168.1.144 Bcast:192.168.1.255 Mask:255.255.255.0 ...


2

AFIK the "permanent solution" is to chedk hardware compatibility lists before you buy. Many wireless usb cards list compatibility with linux on the box. I also check the return policy before I buy. My local computer shop (the one I deal with) knows I use Linux, so they allow me to test before I buy.


2

Any data card will work with Ubuntu. A nice article I found on Internet http://neopatel.blogspot.in/2011/06/reliance-tata-photon-mts-blaze-data.html


2

Tested on my Ubuntu 12.04.1 LTS PC: First, add the following lines to the /etc/udev/rules.d/14-olicardmodules.rules file (you will need superuser privileges to edit it):   ATTRS{idVendor}=="0b3c",ATTRS{idProduct}=="c004",RUN+="/sbin/modprobe usbserial vendor=0x0b3c product=0xc004" ...


2

Don't know if you got your answer, but I got a couple of these devices (was some time ago, do not remember makes/models) working OK in 11.10 and 12.04 via a script called Sakis3G. Sakis3G knows how to switch dongles' modes (mass storeage to modem). You can read about and get it here. It takes care of most dongles by itself (no config needed), has a nice ...


2

When you connect using ubuntu network manager aplet i think it's automaticaly switch form 3G to Edge eventhough network will be disconnected for a while. if you want such us standalone network manager like sierra wireless watcher or huawei mobile partner you can use application named UMTSMON, you can monitor the signal, choose the network type, even send ...


2

I believe the problem you're having is because the Huawei K3765 uses USB "mode-switching" to tell the dongle to stop being a CD drive (where the windows drivers are) and to just be a 3G modem. If I'm right, just install the usb modeswitching program and it should work automatically: sudo apt-get install usb-modeswitch Now unplug the modem and plug it ...


2

Take a look at this answer: How do I set up an MTS MBlaze modem? Placed here for your convenience. Have you tried ejecting the modem? Do not unmount. Simply eject the USB mode which will result in the modem be recognized as a modem. Then it will be available as an internet connection in your favorite Network Manager. The setup then will be ...


2

Try usb_modeswitch. You can install it with apt-get: sudo apt-get install usb-modeswitch So plug out your modem. Install usb_modeswitch and then plug in your modem. Hopefully it will work. But if it doesn't try rebooting your machine. More than a year ago I used it for my ZTE 3G modem and it worked perfectly. I did a write up about how I used my 3G modem ...


2

Using the Blackberry as a modem device through a computer with Ubuntu can be achieved with a few simple steps: Open the terminal from your menu or using the keyboard shortcut: Ctrl + Alt + T, and then type: Download and install dependencies sudo apt-get install python libusb-dev ppp python-usb sudo apt-get install python libusb-dev ppp python-usb ...


2

About 1 : I am also on Dell Inspiron and using 11.04 with the same wireless adapter. I didn't need to install anything to get the wireless connection going. The only important part is to setup the connection from the Networking icon on the panel at the top (11.04). When you click it the Edit connection appears. Under Wireless settings you might have to ...


2

Vodafone used to offer an application for linux itself, i never used it so i don't know the exact functionality. Right now the site seems to be down for maintenance but you should be able to reach it again in a few hours i guess: http://www.vodafonebetavine.net/web/linux_drivers Edit: Found a link with description and pictures it definitely supports SMS ...



Only top voted, non community-wiki answers of a minimum length are eligible