For questions regarding the use of Ubuntu software to control or monitor hardware temperature, such as by controlling fan speed or showing readouts.

learn more… | top users | synonyms

0
votes
0answers
75 views

After upgrade to 15.04, wrong temperature readings cause fan to go crazy

Since I upgraded to 15.04, twice after I had started it from suspended state Ubuntu would right away start spinning the laptop fan like crazy since it thought that one of the temperatures was 100°C ...
3
votes
2answers
524 views

How to set governors for Intel to work as old good ondemand?

I used to work on my laptop on ondemand governor, which was switching CPU frequency depending on CPU usage. It worked quite nice for years and had three very important advantages: low hardware ...
2
votes
3answers
666 views

thinkfan control doesn't use the fan full potential when needed

I own a Thinkpad x201 and is overheating very fast because of the environmental temperature and eventually kills himself without notice (and it really grinds my gears). Outside there are 34 degrees C ...
14
votes
4answers
3k views

My ubuntu macbook pro feels warm, can I solve this?

I've installed Ubuntu 13.04 in a partition on my MacBook Pro (MC724LL/A), it runs well, I've also installed Jupiter, mbpfan, Intel Linux Graphics Installer and updated the drivers. I'm booting with ...
1
vote
4answers
872 views

How to get Ubuntu to stop heating up so much

I already have another post on how to control the fans, but I was wondering if I am doing anything to cause this. Ubuntu is running great at the beginning but after about twenty minutes of running ...
0
votes
1answer
19 views

Is I-nex temp reading accurate

I got I-nex and I was wondering if the cpu temperature is accurate. I have a fx-4150 and wanted to do a slight overclock. My computer is pretty much idle with only I-nex open. It says my cpu temp is ...
0
votes
1answer
22 views

How can I disable/enable ubuntu's auto shut down feature?

Ubuntu has a feature of auto shutdown whenever it exceeds a temperature above 70 degrees Celsius. Is there any way to control this feature or prompt before the shut down?
-2
votes
0answers
45 views

How to compile PSensor ATI gpu temp

i was wondering if someone could help me compile Psensor to show amd/ati gpu temp. Ive read the "readme" pages over on the Psensor site and im new so i dont understand how to "compile" it. i have ...
-1
votes
0answers
68 views

Lenovo G50-70 fan control

I'm using linux for many year but i meet a problem using it with my new Lenovo G50-70. I'm aware about the wifi falling problem on this model but it's not a problem with ethernet LAN connection. But i ...
2
votes
2answers
70 views

Can't get the right CPUcore temperature (Acpi chip)

After replacing my motherboard I try to get Psensor working correctly but still I cannot get the right temperature for my CPUcore temp, it's always -127C degrees. I installed lm-sensors and everything ...
1
vote
1answer
4k views

My fan is not working, no active cooling system

I am using Ubuntu 14.04 on my laptop and my fan is not working(with Ubuntu 12.04 and Ubuntu 13.10 it was the same). Short summary of my system Quanta TWH motherboard, Intel® Core™ i7-2630QM ...
1
vote
1answer
242 views

How to get temperature indicators in the panel in 14.04

I was formerly using 10.04, where I had nice temperature indicators for my dual core like this : I am now trying to have the same feature with 14.04, but I haven't succeeded yet. I tried so far : ...
0
votes
1answer
390 views

Touchpad heating up on dell inspiron n5010

My laptop Dell Inspiron N5010 runs an Ubuntu 12.04.4 LTS 64 bit version. I have installed all the necessary fglrx drivers and the laptop temperature is not very high. It persistently remains between ...
0
votes
0answers
25 views

Can I turn off one of my laptop's two graphical modules?

My Thinkpad T400 has two graphical modules: - ATI discrete graphic module: description: VGA compatible controller product: RV620/M82 [Mobility Radeon HD 3450/3470] vendor: Hynix ...
1
vote
2answers
69 views

How to read hardware temperatures and other info in Ubuntu

So all the previous answers that I have found pretty much tell me to install lm-sensors. But there is a lot of configuration with it that I find odd. I am sure there are more simpler ways. For ...
12
votes
3answers
17k views

Flux for ubuntu 14.04 - possible?

Is it possible to make Flux work in ubuntu 14.04? If so, maybe you can share your knowledge or point me to a guide? (Flux is software which adjusts temperature of your display according to time of the ...
1
vote
0answers
166 views

T430 i5 overheating

Heavy overheating - How to stop? I have a ThinkPad T430 running a Intel® Core™ i5-3320M CPU @ 2.60GHz × 4 (IvyBridge) on Ubuntu 14.10. I reinstalled Ubuntu a few weeks ago. While I always thought ...
0
votes
0answers
40 views

Can fancontrol / pwmconfig monitor both CPU and GPU?

My system is cooled by a custom water loop. I use fancontrol to vary the speed of the water pumps depending on the casing temperature of the CPU. Here is my current fancontrol config: INTERVAL=10 ...
0
votes
0answers
29 views

Ubuntu 14.10 Kworker using once cpu core to 80 % [duplicate]

I've encountered a problem with my ubuntu/lubuntu distribution regarding laptop overheat/abnormal cpu usage, pstate intel driver (I thought that this new driver overheated my laptop etc.) First of all ...
0
votes
1answer
50 views

What is the normal temperature for my computer?

What is the normal temperature for an Acer Homa GL40 chipset? Laptop technical specifications: * Acer Extensa 5230e * Motherboard: Intel GL40 * CPU: Intel mobile core 2 solo @ 2.20 GHz During idle ...
0
votes
1answer
55 views

Samsung Series 7 Heating

i have installed Ubuntu 14.04 and windows 7 on my laptop and i have noticed that when Ubuntu is running temperatures are much higher than Windows. What can i do to solve this issue?
1
vote
2answers
944 views

proliant dl380 g4 lm_sensors doesn't work

I have ubuntu server 11.04 edition, and i have installed and configured lm-sensors properly and grub boot is normal/default set. When i type the following command: sensors i get: acpitz-virtual-0 ...
0
votes
1answer
91 views

Are those temperatures high for my computer?

I've just erased Windows 7 because I got so pissed off at him and decided to replace it with Ubuntu 12.04. Im kinda new to Ubuntu and I´ve downloaded Psensor since I was feeling my notebook a little ...
0
votes
0answers
303 views

ASUS laptop overheating when using Ubuntu

I've got major problems while running Ubuntu. When I have my NVIDIA GeForce card enabled, the temperature of the processor is really high. Just a little web browsing rises it up to 70 degrees celcius ...
0
votes
1answer
113 views

Ubuntu 12.04 Laptop Heating problem

I have dual booted Windows 8 with Ubuntu 12.04. When I use Windows the temperature remains normal but when i use Ubuntu my laptop gets heated up and the temperature goes to 70-90 degrees C just after ...
4
votes
4answers
2k views

Limit CPU usage in terms of temperature

I run distributed computing projects, which typically want to use 100% of the CPU. How do I limit the CPU usage in terms of temperature instead of percent usage? Also, what is the maximum safe ...
0
votes
1answer
86 views

Very hot laptop: Dell xps l521x [duplicate]

My Dell XPSl521x is very warm. The temperature sometimes reaches 90°C. Psensor shows that the laptop is hot: it has a red colour. What should I do?
27
votes
6answers
31k views

How to see the Video Card Temperature (Nvidia, ATI, Intel…)

Is there a command (Via terminal) to see the temperature of any video card. Already Tried sensors with the sensors-detect applied. Does not detect for example, Nvidia and ATI video card temperatures. ...
-1
votes
1answer
798 views

How do I fix my AMD/ATI GPU drivers (temp is 83 C at idle)?

I am using a Sager laptop with an AMD Radeon HD 6970M 256bit w/2GB GDDR5 and an Intel® Core™ i7-2720QM. When I boot to Ubuntu 12 the CPU is fine and idles at a good temperature, but the GPU is in the ...
2
votes
1answer
442 views

Nvidia GPU temperature shown twice in conky

My problem is, that in Ubuntu 14.10 the old ${nvidia temp} code is not working, I use this code instead: ${execi 60 nvidia-settings -query GPUCoreTemp | perl -ne 'print $1 if /GPUCoreTemp.*?: ...
0
votes
1answer
75 views

Is there an app which I can check the temperature of my PCI network card? [closed]

I have tried Hardinfo and sensors, but they don't look to meet what I'm looking for.
0
votes
1answer
226 views

Incorrect CPU temperature reprted (AMD fx-6300

Psensor and hardware sensors indicator both report an incredibly low temperature on my AMD fx-6300 cpu, below 20 degrees celcius. Below is a screenshot of what it looks like within Psensor: I have ...
0
votes
1answer
191 views

./setup.py: command not found

I followed steps from here Flux for ubuntu 14.04 - possible? to install flux but I am getting an error like ./setup.py: command not found please guide me soon. Thank you
0
votes
1answer
125 views

Nvidia 820M operating in a high temperature

Laptop: DELL Inspiron 3000 Series I14-3442-A40 (Core i5) GPU: Nvidia 820M (2GB 64 bits) Ubuntu: 14.04 - 64 bits Nvidia Driver: 331.38 Problem: My GPU temperature is reaching 90-93 degrees Celsius ...
0
votes
1answer
148 views

How can I tell, from within Ubuntu, if my liquid cooling system is pumping?

I have an alienware auroroa-r4 with a liquid cooling system. Before installing Ubuntu my temperatures on Windows would always be around 25°C idle and 30°C when running several applications. Ever since ...
0
votes
1answer
773 views

Fan control in Ubuntu 14.10. on Asus z97

How to properly set up fan control on Ubuntu 14.10? I have an Asus z97 mini motherboard and while in windows even with heavy load for a long time it does not reach 70 Celsius degree, on Ubuntu easily ...
90
votes
7answers
143k views
0
votes
0answers
51 views

Ubuntu Battery Issues

I'm using Ubuntu 14.04 on an Acer 5750g (CPU i5 2410m, Gt540 M, Samsung Evo840 SSD) I've been experiencing problems concerning temperature, battery life and (thus I guess) CPU usage. I've installed ...
3
votes
2answers
1k views

Which is a normal temperature for a laptop?

I have a Samsung series 5 my temperature is around 77-80°c when i am playing, and 48-54 on normal use it laptop don't have a month and I am not sure if it is normal. Intel® Core™ i5-3210M CPU @ ...
0
votes
1answer
719 views

Computer heats more using Ubuntu 14.10

My computer's configuration is: Ubuntu 14.10 NVIDIA GeForce 630M Intel i5-3210M 6Gb RAM 1Tb HD I have always used Windows, and after installing Ubuntu last year I could feel that the heat coming ...
0
votes
2answers
13k views

How to detect processor correct temperature in conky

I am using conky&conkyforecast to have a nice widget containing some system information and weather data. But I can see that the temperature that conky shows is different than the one I get ...
0
votes
1answer
102 views

mysqld is suddenly taking too much memory and my laptop is getting hotter

I have been using ubuntu 14.04 for a while but really new to linux command line stuffs. I mainly use it for Java/android/web development purposes. Sometimes I notice my laptop gets more hot than ...
1
vote
2answers
733 views

What is the best way of monitoring GPU temperature in Xubuntu 14.04 when using the OpenSource driver?

I had a severe problem with GPU temperature in 12.04 and even later, and even if that seems gone in 14.04, I want to keep an eye on my GPU. Is there a program that would display that, in the ...
3
votes
3answers
5k views

What the different hardware temperatures listed in psensor, sensor viewer etc reffer to?

I have installed psensor and see a list of temperatures, but listed as ”Temperature 1”, 2, 3 etc . I can only guess where the processor is: but who's who for sure? The same question stands for ...
0
votes
1answer
127 views

How to configure sensord deamon?

I would like to configure sensord daemon to raise beep alarm if some temperature are too high. I cannot find any guide/example, the man page is not very useful, any hint ?
0
votes
0answers
74 views

how to improve temperature on ubuntu laptop

I have a 3 year old laptop that is now running ubuntu 14.04 but it runs very hot(80°C) and very loud on idle. edit: I just took the whole thing apart and cleaned tha fans. I'm looking for ways to ...
0
votes
0answers
22 views

ASUS X101h high temperatur

I have ASUS X101h netbook and installed all debian/ubuntu/arc/redhat/fedora etc.. distros. In all situations, virtual device temperature and CPU temperature is too high.(When I open firefox and open ...
0
votes
0answers
36 views

Sensor is seen as disconnected and conduce to overheating

I'm running kubuntu 14.04 on a Thinkpad X201. Today or yesterday I started having overheating problem. After looking at the temperature given by the sensors (using lm-sensors), it looks like the main ...
2
votes
3answers
1k views

SSD temperature sensor readout with hddtemp

It seems hddtemp cannot detect the temperature sensor of my SSD (Samsung EVO 840) properly.This is the bash output when running hddtemp: WARNUNG: Laufwerk /dev/sda scheint keinen Temperatur-Sensor zu ...
13
votes
2answers
55k views

CPU temperature monitor for 14.04LTS?

Is there a way to configure psensor so the temperatures read out in real time in the panel so it could be read at a glance? So far, in order to read the temperature I have to click on the applet ...