3
votes
1answer
119 views
+50
How to set up SAMBA / CUPS print server?
I am using 13.04 on an old laptop hooked up to a printer that I would like to access from my Windows 8 PC. I have been working on this for hours and I cannot seem to get the right configuration of ...
0
votes
0answers
61 views
“windows printer via samba” does not work
I am an absolute beginner in Ubuntu. I have installed Ubuntu 12.10 using Wubi from windows 7. It was a clean install.
Now I have upgraded to Windows 8. But the problem I am facing lies with either ...
0
votes
0answers
11 views
HL2240 Printer over samba
I'm having a bit of trouble with a samba printer. I have the drivers installed, by following these instructions:
Printer Instructions
sudo apt-get remove --purge cups
sudo apt-get install cups
sudo ...
0
votes
0answers
18 views
Share printer to another computer (without CUPS)
I have a printer which has no drivers available for linux. There are only Windows drivers available from the vendor. The printer is Lexmark X2470.
So since I can't install the printer, nor use it ...
0
votes
0answers
30 views
Can a printer user code be entered in the printer settings gui?
I managed to get my Ubuntu laptop to do wifi printing at the university in Australia where I study, I was told that only windows using only Internet Explorer can print (not even Mac) as they have a ...
0
votes
0answers
17 views
How to share printer from Ubuntu server using Samba? [duplicate]
I want to share my print from Ubuntu server using Samba to LAN computers.
How can I config smb.conf file to do that?
1
vote
0answers
132 views
problem sharing printer via samba in Ubuntu server 12.04
I have cannon ImageRunner 1133 I want to share it through samba with cups server installed on Ubuntu server 12.04
it works all fine I installed samba and cups server ubuntu and windows clients can ...
0
votes
1answer
152 views
Connect to Windows7 machine and print document
I have Windows7 on one machine. Ubuntu 12.10 on another. I have a printer connected to the Windows7 machine. Basic network home lan setup. The brother printer works fine on windows 7. I setup ...
0
votes
1answer
275 views
sharing a printer in windows 8 with a ubuntu machine on a network
I'm struggling to share a printer that is connected to my windows 8 machine with a other ubuntu linux machines. It keeps on asking me the username and password to connect to the windows 8 machine. ...
0
votes
1answer
191 views
How do I configure CUPS and change SAMBA setting for no printers?
A couple of time an hour, these lines show up in syslog
Feb 19 09:20:11 KISE-055 smbd[5685]: [2013/02/19 09:20:11.609603, 0] printing/print_cups.c:110(cups_connect)
Feb 19 09:20:11 KISE-055 ...
1
vote
0answers
99 views
Print file was not accepted
I have installed and configured cups and samba on Ubuntu 12.04 server for printing but when my windows clients send print job it stops in print queue and says that "print file was not accepted" any ...
2
votes
0answers
82 views
Cannot print from Java application on Samba printer, but can on network printer
I have strange problem with printing from Ubuntu, and cannot figure how to solve it.
Running some custom Java application on Ubuntu 12.04, and it have to print some of the content.
It can print ...
0
votes
1answer
759 views
Windows Printer via Samba - browse not available
Recently installed Kubuntu 12.10 on a Dell XPS system. Overall happy, but I cannot access my Windows printers. Samba is correctly installed and works for browsing and accessing Windows directories on ...
0
votes
0answers
206 views
How do I configure a CUPS/Samba printer server and share my printer over the LAN?
On my Ubuntu 12.04.1 server I've installed CUPS and Samba. My printer is a HP Color Laserjet 1600 (connected using USB) and it's plugged in, powered on.
Samba file sharing works very well, however ...
0
votes
1answer
117 views
How to get hp printer to select correct trays on samba shared printer
My first post here.
Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem.
Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not ...
1
vote
1answer
87 views
How can I remap usernames when printing to a shared printer?
At work my group currently use self maintained network printers. We also run our own self contained Linux network for some members of the group. It all works beautifully. The management has decided ...
0
votes
1answer
180 views
HP 2410 printer shared on Winwows XP not visible on Ubuntu's network
I have Ubuntu 12.04 and HP 2410 printer shared on Windows XP.
Problem is that under Ubuntu are visible only network printers, but not printers shared on XP.
I installed HP Device Manager, and ...
0
votes
0answers
1k views
Printer Sharing Issue [closed]
So I set up my printer on 12.10 to share via SAMBA. Windows 'sees' it, it will install it on windows (I have the printer driver installs but it asks for it in Windows default list.. ?), then I can ...
1
vote
0answers
112 views
Printing via samba: printer doesn't print, changed properties aren't saved
I'm using Ubuntu 12.04 and I'm trying to connect to a network windows printer via samba in my university.
I've managed to define the printer and everything, even print a test page, however nothing ...
0
votes
0answers
383 views
Can't connect to SAMBA printer with hostname
I'm in a college setting trying to use the printer connected to my desktop PC (running Windows 7) with my laptop running Ubuntu 12.04. Here's a few preliminary details;
Host computer (Windows) name: ...
0
votes
1answer
422 views
Unable to connect to Samba printer
I have a headless Ubuntu 12.04 server for files and printers. It shares files via Samba just fine. However, the HP PSC-750xi connected to the server via USB is not accessible from my Ubuntu 12.04 ...
0
votes
0answers
392 views
samba print sharing
I am trying to migrate some light-weight services from an ubuntu 10.04 server to 12.04, but I cannot get the network printing to work as before, using cups 1.4.3 and samba 3.4.7 on ubuntu 10.04.4 I ...
0
votes
2answers
1k views
Network printer problem with 12.04
I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network.
About a month or so ...
1
vote
2answers
3k views
Configuring Samba to allow Use of CUPS printer
Having trouble with samba printing. I have a CUPS printer installed on an Ubuntu 11.04 server and that works great.
When I try to configure samba to allow an XP machine to use the printer, it fails ...
2
votes
4answers
10k views
Ubuntu 12.04 network printing through Windows Samba server
I have to print through a Samba server sharing an HP printer. After upgrading to 12.04 I'm no longer able to get it to work.
The printer is shared through a samba server and I need to provide logon ...
0
votes
1answer
689 views
Why doesn't printing from Windows XP to 12.04 using Samba work?
I have set up my printer to print from Windows XP to Ubuntu 12.04. The printer is connected to the computer with Windows XP, and is being shared across my home network. The computer with Ubuntu 12.04 ...
2
votes
1answer
174 views
I can not install printer Canon ic d860
[Translated Post]
I'm new and I'm installing a printer where I work to change the OS 8 computers before with "win xp" Take and operating a lexmark e120 I was not previously tested drivers, and now I ...
1
vote
0answers
382 views
Printing in Ubuntu 11.10 using Samba from a Windows XP as the printer server [closed]
(Translation)
Hello, I'm a new Ubuntu user and I need help. I can't print with Samba. From what I know, I added the printer driver for the Canon i860. I already tried several drivers. In windows I use ...
0
votes
1answer
208 views
How do I connect SAMBA with a remote Print Server (i.e. Remote CUPS)? [closed]
In this particular setup, SAMBA & CUPS run on two different servers, say Server A (for SAMBA) and Server B (for CUPS).
What I want to achieve is that print jobs coming from SAMBA users (Windows ...
1
vote
0answers
189 views
Gadmin Samba Seems to change my password and cant share my printer [closed]
i have 3 pc at home,
a low end desktop running Xubuntu , a windows 7 laptop and another laptop dual booting windows and ubuntu..
since days i have been messing around to make the printer attached to ...
1
vote
1answer
839 views
After boot, need to restart smbd to get printer sharing to work. Is it starting before cups?
As the title says, after I reboot I need to restart smbd to get printers to show up over smb. My thought was that maybe smbd is set to start before cups and gets messed up? This is with 11.04, how I ...
0
votes
1answer
388 views
How do I launch the “SMB Browser” and point it to a Windows Print share?
I need to know if launching Ubuntu's "SMB Browser" program (pictured below) and pointing it at a Windows print server is possible.
I tried using ps aux to get an idea of what program is being used ...
9
votes
4answers
3k views
Share files and printer between two Ubuntu boxes
I have two Ubuntu boxes and want to share files and printer between them. I'm reading about Samba but I have a question: Is Samba only for sharing thing between Ubuntu and Windows? Another question: ...
5
votes
4answers
2k views
Network print to brother MFC-7420
I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine.
The brother is attached to a windows XP machine and is shared.
This is what I have tried:
System->Administration->Printing,
...
