0
votes
1answer
87 views

Resolution issue with Ubuntu 14.04.1 [Dual Boot with Windows 7]

I installed Ubuntu 14.04.1 along side my Windows 7 operating system today. My Windows Partition works perfectly fine, the GRUB menu works perfectly fine, and I've installed any updates for Ubuntu that ...
0
votes
0answers
28 views

How to change/add extra resolutions in xorg.conf?

I faced with a single 600x800 resolution in my Ubuntu 14.04 LTS, running on MBP through Parallels. I have this list of resolutions (I have ratio < 10, so the image is in http://tinypic.com). After ...
0
votes
0answers
28 views

Unknown resolution on ubuntu 14.04 after software update

i have been using ubuntu 14.04 since its launch without any problem whatsoever but since yesterday when i started my system, i was horrified to see my screen resolution changed to 1024x768 from ...
0
votes
1answer
36 views

Cannot get a 2160p (4K) display to work

I have a lenovo X1 carbon laptop, and an external display (Philips 288P6) attached to the DisplayPort of it. The monitor can do 3840x2160 resolution, as demonstrated by the Windows 8.1 that ships with ...
1
vote
1answer
35 views

How do I get a display resolution above 1024x768 on my ATI Radeon x800

I've been bashing my head against this for the last few hours on and off. I've a pretty archaic graphics card (radeon X800) connected up to a 37" Samsung Smart TV and I'll be damned if I can get the ...
1
vote
0answers
51 views

Ubuntu 14.04 on Dell XPS L701X with GeForce GT 435M - Low Resolution

Moving from Ubuntu 12.x to 14.04 (clean install, not an upgrade) I've ran into trouble I've never had before. Many times I've installed bumblebee with the proprietary nvidia drivers, but this time ...
0
votes
0answers
85 views

Setting screen resolution Ubuntu 14.04 LTS

Best resolution for my monitor is 1440 x 900. I had everything working well, but after some update the screen was totally black on startup so I had to reinstall Nvidia drivers. Now I have lower ...
0
votes
0answers
59 views

Display not using xorg.conf?

How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using ...
0
votes
0answers
73 views

Very small everything on my monitor - Lenovo Yoga 2 pro

I've tried this:" To make permanent (and also nicer, xrandr scaling doesn’t look good), create a file /etc/X11/xorg.conf.d/10-monitor.conf with this content: Section "Monitor" Identifier "eDP1" ...
0
votes
1answer
39 views

12.04 displaying video via with vga with optimus disabled but external display not detected

I have a Dell vostro 3446 notebook with nvidia optimus. Since I do not need the capabilities of the dedicated gpu, I have blacklisted the nouveau driver and switched off the nvidia gpu with ...
1
vote
0answers
103 views

Dual Monitor resolution doesn't work.

So here's the thing, you are my last resort, I have tried a lot of things before asking you for help, well not a lot, just two I think but I don't know that much so it's hard for me to change ...
0
votes
0answers
52 views

Xrandr changes resolution on it's own initiave

I am running Ubuntu 14.04 with bumblebee. I've got an HD 4000 and a 635m, and as many of you know the display is controlled by the intel card. I have a CRT that can reach refresh rates up to 120 hz. ...
1
vote
0answers
73 views

Toshiba satellite L755 nvidia resolution + boot problem

I don't have alot of experience in linux, I tried all the solution I could find before asking this, here it goes: I recently got a new Toshiba laptop, today I installed ubuntu 14.04LTS alongside of ...
1
vote
0answers
69 views

ViewSonic Monitor and Nvidia Graphics Card: Overscan

I am struggeling now for almost half a year with my graphic-configuration ( ViewSonic VX2835wm, nvidia GeForce GTS 450). On a fresh install of Ubuntu 14.04 with the proprietary nvidia driver Version ...
2
votes
0answers
61 views

How do I configure the resolution on an HP Envy 15 with an AMD Radeom 7690M?

The computer: notebook, HP Envy 15 (2012) AMD Radeon 7690M also Intel HD graphics. The problem: After installing Ubuntu 14.04, my resolution is automatically at 1024x768 and system settings and ...
1
vote
1answer
240 views

Installing Driver for Matrox M9140 on Ubuntu 14.04

OS: Ubuntu 14.04 64-bit Graphics Card: Matrox M9140 Monitor: Dell UltraSharp U2312HM 23" Driver Location: http://www.matrox.com/graphics/en/support/drivers/download/?cid=MTE2MTM3NQ==&id=574 ...
1
vote
2answers
82 views

SOLVED: Menu bars and launcher missing (after tampering with xorg.conf)

I'm completely new to Ubuntu, and I'm trying to get to know the various stuff in here. One of these things was to set my screen resolution to 16 bit, in order to play an old game. After browsing ...
2
votes
1answer
572 views

Kubuntu 14.04LTS, Radeon RS690 (X1270), unable to use resolution of more than 1024x768

I have recently upgrade from 10.04LTS to 14.04LTS. Somewhere along the way, my ability to use 1366x748 resolution stopped. Any suggetions would be apprecieated. I have tried various solutions ...
1
vote
0answers
83 views

Cant get full resolution on Second monitor with nvdia geforce 210 on 14.04

I am using two Samsung 1920x1080 monitors with my Ubuntu 14.04 machine having an nvdia geforce 210 graphic card. The first monitor is connected to the VGA port and the second monitot to the DVI port ...
0
votes
0answers
85 views

Screen resolution of 14.04 on Microsoft Azure with NoMachine(NX)

I did as follows: VM environment is Microsoft Azure. Created a VM instance of Ubuntu14.04 server edition. login via SSH Installed KDE desktop and NoMachine(NX) free. From the local NX ...
0
votes
0answers
402 views

Ubuntu Gnome 14.04, change resolution on GDM login screen/system wide?

Under Ubuntu Gnome 14.04, Gnome 3.12, I'm running with a different from my maximum resolution. After login, the resolution is set fine, and when I log in after locking the machine, the resolution is ...
0
votes
0answers
194 views

My Ubuntu 14.04 doesn't maintain the monitor's resolution I've set through nvidia driver-xorg.conf

I have a clean installation of Ubuntu 14.04; I've also installed the nvidia-driver on my GeForce 9800 GT(v.331.38, proprietary drivers of Ubuntu), set the resolution 1280x720 and save it through ...
0
votes
0answers
135 views

Dual-Monitor with Nvidia GTX 660 not detecting second Monitor

I've been trying this dual-monitor set-up for the last 2 weeks but with no success. I've readed tones of forums and tutorials but nothing seems to work. I'm trying to get both screens through the 2 ...
0
votes
0answers
25 views

Urgent Troubles With Screen Resolution [duplicate]

I fresh-installed linux-ubuntu and the screen resolution was at 1280x1024 or something close to that (not my native 1920x1080). I searched how to fix that, tried everything to no avail. I have tried: ...
1
vote
0answers
238 views

Xrandr error when using using 2560x1440 monitor

I have an 2560x1440 monitor on an Intel HD graphics adapter. Since Intel HD cannot by default drive a display higher than 1920x1200, I used in Ubuntu 12.04 the following trick (derived from ...
0
votes
1answer
262 views

Ubuntu 14.04 kvm instance has low resolution

I have a kvm guest instance of Ubuntu 14.04 running with a vga type video device. I do not have a /etc/X11/xorg.conf file, I am letting X autoconfigure the video and all devices. When X comes up, the ...
-1
votes
1answer
92 views

Text gets displayed during boot after Nvidia installtion [duplicate]

After installing latest nvidia drivers from xorg edgers ppa, the boot screen ( where it shows ubuntu logo) displays background process as text. Is there any way to restore the default boot screen ...
1
vote
0answers
54 views

14.04 Parallels and VirtualBox Resolution Issues [duplicate]

I recently installed Ubuntu 14.04 on Parallels and VirtualBox. Been trying multiple methods to fixing the resolution with no luck. I am running both these VM's on my mid-2013 MBPr: Intel Iris: ...
1
vote
1answer
358 views

Nvidia DVI/VGA problem

I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output. The driver (got the latest one) ...
1
vote
0answers
26 views

Pointer speed (trackpad) increases with screen resolution (independently in x and y)

I'm experiencing a strange problem (feature?!) in Ubuntu 13.10 on my Latitude E4200: When I plug in an external monitor, extending my desktop, my pointer speed increases in the same direction as my ...
0
votes
0answers
164 views

Can't set resolution higher than 1360x768

I have tried to look up fixes but none of them seems to work My first problem is that my screen is not recognized, it is an AOC 2436Vwa 24". Out of the box ubuntu could not select a higher resolution ...
0
votes
1answer
392 views

How do I get a Dell U2414H monitor and Nvidia NVS300 working?

I can't get Ubuntu 12.04 LTS to run xwindows in my monitors native resolution. I have a Dell U2414H monitor and NVIDIA NVS 300 video card. I am connected via a Single Link DVI to HDMI cable. When I ...
3
votes
1answer
263 views

Can't change the resolution higher than 1024x768

Hello complete newbie here. So from the moment i installed ubuntu 12.04 i tried changing the resolution to the maximum supported by my monitor which is 1440x900. I tried installing the proprietary ...
0
votes
0answers
163 views

Resolution problem with Nvidia GT 620

So today my computer needed a reboot and when it booted back up my resolution had changed. It used to be either 1280×1024 or 1400x900 I can't remember but now after fighting with the GUI display ...
1
vote
0answers
202 views

Low Screen Resolution

The max I can set my resolution currently is 1024x768, but my laptop's native resolution is 1920x1080. I've always been able to set it to 1920x1080 without issue, but since I broke my video driver (I ...
1
vote
1answer
126 views

Kubuntu 13.10 changing x mode after login

I have a QNIX 2710 monitor which reports bad EDID. Using the nouveau module the screen works fine @ 2560x1440 however the performance isn't ideal so I wish to use the nvidia binary. I have installed ...
0
votes
1answer
229 views

13.10 - How to use the maximal resolution with an Acer X233H monitor?

I reported this as a bug already (https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1272621) but as I think this might be useful to other users, I thought I should ask for a fix ...
0
votes
1answer
217 views

Resolution not in xrandr and make new Resolution permenent?

I am using a monitor which its native (optimal) resolution is 1600*900. but xrandr doesn't show any resolution above "1024x768". I can change to my native resoution by issuing these 3 commands: ...
1
vote
1answer
57 views

After Ubuntu update display size is 7" and it loads a Mobile version of Ubuntu

Using Ubuntu 13.10 after the latest update I restarted. Now there is no mouse cursor, the screen resolution has changed to 1920x1080 and the text is unnecessarily huge. I managed to get to the display ...
0
votes
0answers
134 views

low screen resolution after installing bumblebee

I installed bumblebee and on reboot, I had lost the screen resolution I had before. I have tried uninstalling bumblebee and also deleted the xorg.conf file but I am still stuck with the low ...
1
vote
1answer
427 views

Display Driver and Resolution Issues

I'm recently installed Ubuntu 13.10 on my PC and it was working fine. However, I was messing around with Conky (the system resource monitor) and was having some issues. I did a little research and ...
0
votes
0answers
87 views

Add custom resolution to dual monitor setup ubuntu 13

I switched from Windows 8.1 to Ubuntu and now I have a resolution problem, before I had 2 * 1280x1024 now one is 1280x1024 and the other one 1152x864 I tried some console commands as shown below: cvt ...
1
vote
0answers
69 views

Preventing app windows from changing workspaces when screen resolution changes

I'm on Ubuntu 12.04.3 LTS I have a Dell laptop with resolution 1400x900 attached to an external monitor with resolution 1920x1080. When I attach to the external monitor I close the laptop lid and ...
0
votes
0answers
69 views

wrong resolution on an attached projector to desktop pc (with nvidia gpu, set as “twinview”)

I have an NVIDIA Quadro FX 1800 gpu on a ubuntu 13.04, with driver v.319 . The primary monitor (res. 1280x1024) is connected to the display port of the card (1 or the 2). The gpu has a DVI output , ...
1
vote
0answers
815 views

Set default Desktop resolution when no monitor

Background : I am using a Ubuntu 12.04 with X11VNC server. Normally I do not connect the monitor to this computer. So it has some resolution issue. After few days of research I found this answer and ...
4
votes
1answer
2k views

How to get the right DPI resolution on Ubuntu 13.04 Saucy?

The physical DPI of my laptop screen is approximately 142 dots per inch as you can calculate from the correct output of xrandr --query: $ xrandr --query | head Screen 0: minimum 320 x 200, current ...
0
votes
0answers
643 views

13.10 ViewPortIn Display/Resolution Issues

This is my first it posting. I am having issues setting a resolution that is persistent when rebooting/restarting the xserver. I am running 331.17 as my driver, i have tried the other drivers as well. ...
0
votes
0answers
127 views

Resolution changes after resuming from standby and sometimes at login screen

I have installed the proprietary driver for my nVidia Geforce GT 630, however after i resume my computer from standby the resolution changes to 1024x768 while my monitor maximum resolution is ...
0
votes
0answers
161 views

Not working 635M Nvidia drivers in Ubuntu 12.04

I've been having a nightmare trying to install the 635M Nvidia drivers in my Asus N46VJ. I've install bumblebee and follow a bunch of suggestion from many places, I think maybe all the attempts I've ...
0
votes
0answers
1k views

Videocard problem, xRandR failure, Multiple displays, screen resolution problem

Yesterday I updated from Ubuntu 13.04 to Ubuntu 13.10. Had some problems with my GPU drivers, but after 12h of figuring out what was wrong and fixing it I found this solution: Ubuntu 13.10 - Black ...